Richard:
Many C&C models have the prop shaft angled approx. 6 degrees to
portmine doesit allows you to remove the prop shaft without
dropping the rudder, if you ever had to.
Some say, with a clockwise rotating prop, it helps with the forward prop
walk to keep your wheel/rudder balanc
oria, B.C.
From: "Richard Gotthardt"
To: cnc-list@cnc-list.com
Sent: Sunday, May 7, 2017 6:01:36 PM
Subject: Stus-List Angled Prop Shaft
I was looking at a 1981 34 today and noticed that the prop shaft was slightly
angled off the center line towards the port side. Is that by design
st"
Cc: "Richard Gotthardt"
Sent: Sunday, May 7, 2017 7:01:36 PM
Subject: Stus-List Angled Prop Shaft
I was looking at a 1981 34 today and noticed that the prop shaft was slightly
angled off the center line towards the port side.
Sounds like a Sabre.
Reason depends on who you ask. For right hand prop, the offset to port
will reduce prop walk in reverse.
On Sun, May 7, 2017 at 9:02 PM Richard Gotthardt via CnC-List <
cnc-list@cnc-list.com> wrote:
> I was looking at a 1981 34 today and noticed that the prop shaft was
> s
I was looking at a 1981 34 today and noticed that the prop shaft was
slightly angled off the center line towards the port side. Is that by
design to counteract prop walk?
___
This list is supported by the generous donations of our members. If you wish to
