-boun...@cnc-list.com] On Behalf Of John and
Maryann Read via CnC-List
Sent: Saturday, November 16, 2019 11:52 AM
To: cnc-list@cnc-list.com
Cc: John and Maryann Read
Subject: Stus-List 34 rudder shaft bearing
Our rudder shaft leaks where it passes through the cockpit floor. There is
no play in the
, November 16, 2019 1:22 PM
To: cnc-list@cnc-list.com
Cc: WILLIAM WALKER
Subject: Re: Stus-List 34 rudder shaft bearing
When was last time you put grease in the cup on the shaft log? If you don't
have play in the rudder shaft, this may be your problem. I am sure you know
there is a grease cup o
I had a similar problem with water pooling around the rudder shaft bearing.
When I went to upgrade the starting pedestal (Edson Vision II) I found that the
cockpit sole was water saturated and delaminated. The solution was to cut out
a 2' x 2.5' section and replace it with marine plywood that
grease fitting – issue is water / rain
leaking in
John
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of WILLIAM
WALKER via CnC-List
Sent: Saturday, November 16, 2019 1:22 PM
To: cnc-list@cnc-list.com
Cc: WILLIAM WALKER
Subject: Re: Stus-List 34 rudder shaft bearing
, November 16, 2019 1:22 PM
To: cnc-list@cnc-list.com
Cc: WILLIAM WALKER
Subject: Re: Stus-List 34 rudder shaft bearing
When was last time you put grease in the cup on the shaft log? If you don't
have play in the rudder shaft, this may be your problem. I am sure you know
there is a grease cup o
When was last time you put grease in the cup on the shaft log? If you don't
have play in the rudder shaft, this may be your problem. I am sure you know
there is a grease cup on the shaft log where it comes through thhe hull. Use
Green Grease, a waterproof grease. Fill the cup, tighten to fo
Our rudder shaft leaks where it passes through the cockpit floor. There is
no play in the rudder, doughnut nut is snug and everything functions
normally. Am suspecting the delrin (?) thrust washer / bearing under the
doughnut nut is degraded after almost 30 years. Not sure if is a thrust
bearing
