@cnc-list.com
Cc: Stevan Plavsa
Subject: Re: Stus-List replacing furling line
Ditto on my ultrafurl, hole and stop knot.
Steve
Suhana, C&C 32
Toronto
On Wed, Jul 22, 2015 at 1:00 PM, Alan Bergen via CnC-List
wrote:
My Harken furler has a hole in the top of the drum. I just pass
To: CNC boat owners, cnc-list
Cc: Chuck S
Subject: Re: Stus-List replacing furling line
My Harken 01 uses 5/16" line and a figure eight knot works fine to keep the
line in the drum.
Found the manual online and if it is the same model, a knot would work for you
too.
http://www.harke
4R
Broad Creek, Magothy River, Md
- Original Message -
From: "Marek Dziedzic via CnC-List"
To: cnc-list@cnc-list.com
Cc: "Marek Dziedzic"
Sent: Wednesday, July 22, 2015 10:06:48 AM
Subject: Stus-List replacing furling line
I need to replace the furling line in my
forgot, before you unfurl the sail, reconnect the tack to the drum
Dwight Veinot
C&C 35 MKII, *Alianna*
Head of St. Margaret's Bay, NS
d.ve...@bellaliant.net
On Wed, Jul 22, 2015 at 7:42 PM, dwight veinot wrote:
> Marek
>
> My Harken furler is not the same Unit 00 but replacing the line is eas
Marek
My Harken furler is not the same Unit 00 but replacing the line is easy.
With the sail furled disconnect the tack of the sail from the drum, pull
the furling line completely off the drum and undo the stop knot (I use a
figure 8) measure the length, get a new line a few feet longer, same
dia
you undo!
Charlie Nelson
36 XL/kcb Water Phantom
Oriental, NC
cenel...@aol.com
-Original Message-
From: Alan Bergen via CnC-List
To: C&C Photoalbum email list
Cc: Alan Bergen
Sent: Wed, Jul 22, 2015 1:01 pm
Subject: Stus-List replacing furling line
My Harken furler has a
-From: Stevan Plavsa via CnC-List Date: Wed, Jul
22, 2015 10:45To: cnc-list@cnc-list.com;Cc: Stevan Plavsa;Subject:Re: Stus-List
replacing furling line
Ditto on my ultrafurl, hole and stop knot.
SteveSuhana, C&C 32Toronto
On Wed, Jul 22, 2015 at 1:00 PM, Alan Bergen via CnC-List
wrote:
My Hark
Ditto on my ultrafurl, hole and stop knot.
Steve
Suhana, C&C 32
Toronto
On Wed, Jul 22, 2015 at 1:00 PM, Alan Bergen via CnC-List <
cnc-list@cnc-list.com> wrote:
> My Harken furler has a hole in the top of the drum. I just pass the
> furling line through the hole, and tie a knot. Nothing more
My Harken furler has a hole in the top of the drum. I just pass the furling
line through the hole, and tie a knot. Nothing more.
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
I need to replace the furling line in my Harken Unit 00 furler. I have the
manual, but the instructions a
Correction.. No need to unfurl. Just untie knot, swap lines, tie new figure 8
knot. . done
Could not be simpler
François
1990 34+ "Take Five"
Lake Lanier GA.
Sent from IBM Verse
___
Email address:
CnC-List@cnc-list.com
To change your list preferences,
t@cnc-list.com>
*Cc:* David <mailto:davidrisc...@msn.com>
*Subject:* Re: Stus-List replacing furling line
I used simple dacron braided and stripped the core for the line that
wraps on the furling drum. It helps lay the line flat and reduces
problems in the drum.
David F. Risch
19
driver) and that’s it.
On this one, I have a problem finding how the line is attached.
Marek
From: David via CnC-List
Sent: Wednesday, July 22, 2015 10:36 AM
To: CNC CNC
Cc: David
Subject: Re: Stus-List replacing furling line
I used simple dacron braided and stripped the core for the line that
replacing furling line
From: cnc-list@cnc-list.com
CC: dziedzi...@hotmail.com
I need to replace the furling line in my Harken Unit 00 furler. I have the
manual, but the instructions are very vague. I would appreciate any hints, if
anyone of you have done this before.
One more thing: the
I need to replace the furling line in my Harken Unit 00 furler. I have the
manual, but the instructions are very vague. I would appreciate any hints, if
anyone of you have done this before.
One more thing: the instruction call for securing the line with a “hog ring”.
Is there an easy way of doi
14 matches
Mail list logo
