Re: Stus-List Impeller/gear puller

I have one of the aforementioned impeller pullers, but it doesn't work with my current pump. I still have it, because it doesn't weigh that much and you never know... (a puller's a puller.) As someone said, what pump do you have? Basically, I figure if I'm going to inspect the impeller I mig

Re: Stus-List Impeller/gear puller

Stus-List Impeller/gear puller Tip. Replace the impeller fasteners with screws which take a hex key. Much easier to work with. From: dwight To: cnc-list@cnc-list.com Sent: Sunday, March 23, 2014 12:21:29 PM Subject: Re: Stus-List Impeller/gear puller David Hardest part is getting the cover of

Re: Stus-List Impeller/gear puller

Tip. Replace the impeller fasteners with screws which take a hex key. Much easier to work with. From: dwight To: cnc-list@cnc-list.com Sent: Sunday, March 23, 2014 12:21:29 PM Subject: Re: Stus-List Impeller/gear puller David Hardest part is getting the

Re: Stus-List Impeller/gear puller

ion list > Sent: Sun, Mar 23, 2014 11:38 am > Subject: Re: Stus-List Impeller/gear puller > > Hi Swight- This sounds like something I don’t want to have happen. I gather > that if I pull with pliers, it might happen? So I really need an impeller > puller? Dave > >>

Re: Stus-List Impeller/gear puller

And lubricate the new impellor before installing.I use messy vasoline _ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S Sent: March 23, 2014 12:54 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Impeller/gear puller David, Tip 1: You should be

Re: Stus-List Impeller/gear puller

mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Knecht Sent: March 23, 2014 12:40 PM To: CnC CnC discussion list Subject: Re: Stus-List Impeller/gear puller Hi Chuck et al.- I have the M4-30. This is the first time I have had the water pump apart so I have no idea when the impelle

Re: Stus-List Impeller/gear puller

Bill Walker Evening Star, CnC 36 Pentwater, Mi. -Original Message- From: David Knecht To: CnC CnC discussion list Sent: Sun, Mar 23, 2014 11:38 am Subject: Re: Stus-List Impeller/gear puller Hi Swight- This sounds like something I don’t want to have happen. I gather that if I pull

Re: Stus-List Impeller/gear puller

keyway if possible so I usually put a clean white rag on the bilge below the pump in case I get clumsy _ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Knecht Sent: March 23, 2014 12:37 PM To: CnC CnC discussion list Subject: Re: Stus-List Impeller/gear puller

Re: Stus-List Impeller/gear puller

t;CnC CnC discussion list" Sent: Sunday, March 23, 2014 11:37:22 AM Subject: Re: Stus-List Impeller/gear puller Hi Swight- This sounds like something I don’t want to have happen. I gather that if I pull with pliers, it might happen? So I really need an impeller puller? Dave On Mar 23,

Re: Stus-List Impeller/gear puller

Hi Chuck et al.- I have the M4-30. This is the first time I have had the water pump apart so I have no idea when the impeller was last removed. I will certainly keep it out for future winters, but I need to get it off to start the process. I actually bought a new one that can run dry for some

Re: Stus-List Impeller/gear puller

Hi Swight- This sounds like something I don’t want to have happen. I gather that if I pull with pliers, it might happen? So I really need an impeller puller? Dave On Mar 23, 2014, at 9:00 AM, dwight wrote: > David > > What water pump. I have a Sherwood pump on mu Universal M4-30 and I ne

Re: Stus-List Impeller/gear puller

David,Forget if you have the Universal M4-30 like me and Dwight?  Many 34plusses were built w Yanmar.Here's what I do after getting much advice from this list over the years:I pull the raw water pump impeller of my Sherwood every Fall and stow it with the key in a sandwich bag to remind me to put i

Re: Stus-List Impeller/gear puller

Bay Shore Marine in Annapolis makes an impeller puller. It ;looks like a bent hemostat. I've also used needle nosed pliers. Joel On Sunday, March 23, 2014, Bill Connon wrote: > Rich Knowles wrote: > >> Check this out: >> >> http://www.westmarine.com/jabsco--impeller-puller-tools--P011_335_003

Re: Stus-List Impeller/gear puller

Rich Knowles wrote: Check this out: http://www.westmarine.com/jabsco--impeller-puller-tools--P011_335_003_502 Rich On Mar 23, 2014, at 9:49, David Knecht > wrote: I need to change my impeller and after an earlier discussion and difficulty removing the present

Re: Stus-List Impeller/gear puller

David What water pump. I have a Sherwood pump on mu Universal M4-30 and I need to be very careful when pulling the impellor off the shaft not to disengage the impellor drive shaft out altogether.if I do that the job of impellor replacement instantaneously becomes a much bigger job. _

Re: Stus-List Impeller/gear puller

Check this out: http://www.westmarine.com/jabsco--impeller-puller-tools--P011_335_003_502 Rich > On Mar 23, 2014, at 9:49, David Knecht wrote: > > I need to change my impeller and after an earlier discussion and difficulty > removing the present one, I purchased an inexpensive gear puller to