Re: Stus-List Cutlass bearing removal

I tried making something similar out of G10 and long bolts. Problem was the difference between the inside and outside dimension was either1/4 or 3/8 inch, so I could not get a collar. That would press out the old bearing. My mechanic pulled the tranny and slipped the shaft forward (I had removed

Re: Stus-List Cutlass bearing removal

If it were out I'd gladly cut it. It's in. Thanks anyhow! Joel 35/3 On Mon, Jan 13, 2014 at 1:05 PM, wrote: > Can’t remember if the shaft is out or still in. > If it’s out, then: > I’ve just measured the outside diameter of a few long reach sockets in my > tool box. A 7/8” has an outside di

Re: Stus-List Cutlass bearing removal

Can’t remember if the shaft is out or still in. If it’s out, then: I’ve just measured the outside diameter of a few long reach sockets in my tool box. A 7/8” has an outside diameter of 1 3/16”. Alternatively, use a hacksaw to saw (carefully) a long cut along the inside of the cutlass bearing r

Re: Stus-List Cutlass bearing removal

Get a couple of heavy 1" id washers with a diameter 1.25 od or greater and grind the od to fit the id of the strut. Then use them to spread the force of the conduit or whatever onto the brass part of the cutless bearing. Rich > On Jan 13, 2014, at 13:19, Joel Aronson wrote: > > All, > > My

Re: Stus-List Cutlass bearing removal tool

1990 C&C 34R Atlantic City, NJ *From: *"Joel Aronson" *To: *cnc-list@cnc-list.com *Sent: *Saturday, Decembe

Re: Stus-List Cutlass bearing removal tool

x27;, 'cnc-list-boun...@cnc-list.com');>] *On Behalf Of *Joel Aronson > *Sent:* Saturday, December 21, 2013 4:27 PM > *To:* cnc-list@cnc-list.com 'cnc-list@cnc-list.com');> > *Subject:* Re: Stus-List Cutlass bearing removal tool > > > > I've poste

Re: Stus-List Cutlass bearing removal tool

Joel, It's looking good. I may want to borrow it later this spring. Jake From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson Sent: Saturday, December 21, 2013 4:27 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Cutlass bearing removal

Re: Stus-List Cutlass bearing removal tool

) if things >> go well! >> >> Joel >> 35/3 >> Annapolis >> >> >> On Sun, Dec 15, 2013 at 12:00 AM, Jim Watts wrote: >> >> It's no big secret once you start looking for them. Mine were on >> starboard, same as the pic. >>

Re: Stus-List Cutlass bearing removal tool

2.i.pbase.com/g3/84/622984/3/111688642.1ncRHrMc.jpg > > There may be some tricks for finding the set screws, others may know? > > > Chuck > Resolute > 1990 C&C 34R > Atlantic City, NJ > -- > *From: *"Joel Aronson" > *To: *cn

Re: Stus-List Cutlass bearing removal tool

Should be fine if the non-metallic parts hold up.pretty similar to the one we made.hope it works _ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson Sent: December 21, 2013 5:27 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Cutlass bearing removal

Re: Stus-List Cutlass bearing removal tool

them. Mine were on >>>> starboard, same as the pic. >>>> >>>> >>>> On 14 December 2013 15:38, Chuck S wrote: >>>> Joel, >>>> Found this picture on web of a typical strut: >>>> http://m2.i.pbase.com/g3/84/622984/3/111

Re: Stus-List Cutlass bearing removal tool

; > > On 14 December 2013 15:38, Chuck S wrote: > > Joel, > Found this picture on web of a typical strut: > http://m2.i.pbase.com/g3/84/622984/3/111688642.1ncRHrMc.jpg > > There may be some tricks for finding the set screws, others may know? > > > Chuck > Resolut

Re: Stus-List Cutlass bearing removal tool

gt;>>> Joel, >>>>> Found this picture on web of a typical strut: >>>>> http://m2.i.pbase.com/g3/84/622984/3/111688642.1ncRHrMc.jpg >>>>> >>>>> There may be some tricks for finding the set screws, others may know? >>>>> >

Re: Stus-List Cutlass bearing removal tool

thers may know? >>> >>> >>> Chuck >>> Resolute >>> 1990 C&C 34R >>> Atlantic City, NJ >>> -- >>> *From: *"Joel Aronson" >>> *To: *cnc-list@cnc-list.com >>> *Sent: *S

Re: Stus-List Cutlass bearing removal tool

picture on web of a typical strut: >>> http://m2.i.pbase.com/g3/84/622984/3/111688642.1ncRHrMc.jpg >>> >>> There may be some tricks for finding the set screws, others may know? >>> >>> >>> Chuck >>> Resolute >>> 1990 C&

Re: Stus-List Cutlass bearing removal tool

NJ >> -- >> *From: *"Joel Aronson" >> *To: *cnc-list@cnc-list.com >> *Sent: *Saturday, December 14, 2013 11:11:22 AM >> >> *Subject: *Re: Stus-List Cutlass bearing removal tool >> >> Chuck, >> >> Still

Re: Stus-List Cutlass bearing removal tool

e tricks for finding the set screws, others may know? > > > Chuck > Resolute > 1990 C&C 34R > Atlantic City, NJ > -- > *From: *"Joel Aronson" > *To: *cnc-list@cnc-list.com > *Sent: *Saturday, December 14, 2013 11:11:22 AM >

Re: Stus-List Cutlass bearing removal tool

uot; To: cnc-list@cnc-list.com Sent: Saturday, December 14, 2013 11:11:22 AM Subject: Re: Stus-List Cutlass bearing removal tool Chuck, Still in the planning stage. My boat should have been hauled Thursday but the tide was so low I could not get the boat to the travel lift. It should be

Re: Stus-List Cutlass bearing removal tool

; Resolute > 1990 C&C 34R > Atlantic City, NJ > -- > *From: *"Joel Aronson" 'joel.aron...@gmail.com');>> > *To: *cnc-list@cnc-list.com 'cnc-list@cnc-list.com');> > *Sent: *Friday, December 13, 2013 8:49:47 PM &g

Re: Stus-List Cutlass bearing removal tool

: cnc-list@cnc-list.com Sent: Friday, December 13, 2013 8:49:47 PM Subject: Re: Stus-List Cutlass bearing removal tool Chuck, Thanks. I looked at Harbor Freight but didn't see one I thought I could adapt. May try Grainger. My mechanic does not have one but is asking around too. I thin

Re: Stus-List Cutlass bearing removal tool

anic working in the yard already. > > Chuck > Resolute > 1990 C&C 34R > Atlantic City, NJ > -- > *From: *"Joel Aronson" 'joel.aron...@gmail.com');>> > *To: *cnc-list@cnc-list.com 'cnc-list@cnc-list.com');>

Re: Stus-List Cutlass bearing removal tool

antic City, NJ - Original Message - From: "Joel Aronson" To: cnc-list@cnc-list.com Sent: Friday, December 13, 2013 10:57:46 AM Subject: Re: Stus-List Cutlass bearing removal tool Josh, I'm trying to avoid the step of "removing the shaft". Internet wisdo

Re: Stus-List Cutlass bearing removal tool

use never-seize on the bolts. They come out easily now. Jake From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley Sent: Friday, December 13, 2013 10:51 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Cutlass bearing removal tool Internet wisdom says that if

Re: Stus-List Cutlass bearing removal tool

Easiest would be the in-hull puck glued to the hull in a spot without core. Best would be the thru-hull, your choice of material. Forget the transom-mount unit, you don't have anywhere to mount it. On 13 December 2013 11:21, Curtis wrote: > The other question is which of the 3 available transdu

Re: Stus-List Cutlass bearing removal tool

The other question is which of the 3 available transducers what would be the one needed for my boat all FG. They have a thru hull plastic or bronze. they have a in-hull puck and a transom mounted one. I will not be using it for fishing just for anchoring. On Fri, Dec 13, 2013 at 1:35 PM, Jim Watt

Re: Stus-List Cutlass bearing removal tool

Here's a pic of it in operation. It worked very well. Thanks again, Bill. http://farm4.staticflickr.com/3720/11356246664_97ff1bb057_h.jpg It also worked to press the new bearing in. http://members.shaw.ca/parmesanshift/images/IMG_2428.jpg On 13 December 2013 09:18, Robert Abbott wrote: > Jo

Re: Stus-List Cutlass bearing removal tool

Josh: I believe Dwight Venoit on this list made a tool to remove a cutlass bearing ..he will respond when he reads thisstay tuned! Rob Abbott AZURA C&C 32 - 84 Halifax, N.S. On 2013/12/13 11:57 AM, Joel Aronson wrote: Josh, I'm trying to avoid the step of "removing the shaft". Int

Re: Stus-List Cutlass bearing removal tool

Bill Let's start with a photo. Thanks! On Friday, December 13, 2013, Bill Connon wrote: > Joel Aronson wrote: > >> All, >> >> Does anyone in the Annapolis area have a cutlass bearing removal tool for >> a 1 inch shaft that I could borrow? >> >> Thanks! >> Joel >> 35/3 >> The Office >> Annapolis

Re: Stus-List Cutlass bearing removal tool

Joel Aronson wrote: All, Does anyone in the Annapolis area have a cutlass bearing removal tool for a 1 inch shaft that I could borrow? Thanks! Joel 35/3 The Office Annapolis -- Joel 301 541 8551 Joel, I'm a long way from you but I have a tool that I made and used on my 36. Jim Watts also

Re: Stus-List Cutlass bearing removal tool

copy well. Dennis C. > > From: Joel Aronson >To: "cnc-list@cnc-list.com" >Sent: Friday, December 13, 2013 10:13 AM >Subject: Re: Stus-List Cutlass bearing removal tool > > > >Here is a link to a homemade tool: > >http://www.trawlerf

Re: Stus-List Cutlass bearing removal tool

Here is a link to a homemade tool: http://www.trawlerforum.com/forums/s6/cutlass-bearing-replacement-shaft-place-5714.html Joel On Friday, December 13, 2013, Joel Aronson wrote: > Josh, > > I'm trying to avoid the step of "removing the shaft". Internet wisdom > also says you can make your own

Re: Stus-List Cutlass bearing removal tool

Josh, I'm trying to avoid the step of "removing the shaft". Internet wisdom also says you can make your own tool, but I don't know if I can find something sized properly to push out the old one. If the yard has the tool I may pay them to do it. Joel On Friday, December 13, 2013, Josh Muckley w

Re: Stus-List Cutlass bearing removal tool

Internet wisdom says that if you don't mind removing the shaft, a hack saw threaded up the cutlass will remove it and a length of all thread and some washers will install it. Let us know what works. Good luck, Josh On Dec 13, 2013 9:54 AM, "Joel Aronson" wrote: > For 50 I would buy it. The one

Re: Stus-List Cutlass bearing removal tool

Yep, I must be mistaken be ause in retrospect the $400 is all I can find. Sucks cause I was planning on a cheap job myself. Josh On Dec 13, 2013 9:54 AM, "Joel Aronson" wrote: > For 50 I would buy it. The one I saw was 400! Can you point me in the > right direction? > > On Friday, December 13,

Re: Stus-List Cutlass bearing removal tool

That's a deal! Joel On Friday, December 13, 2013, Ron Kaye wrote: > > Hi Joel, > If and when you get this and decide to proceed I would like if possible to > assist and observe. Not sure what I can do exactly but fetching a hot latte > from Starbucks is a start. If it works out just let me know

Re: Stus-List Cutlass bearing removal tool

Hi Joel, If and when you get this and decide to proceed I would like if possible to assist and observe. Not sure what I can do exactly but fetching a hot latte from Starbucks is a start. If it works out just let me know time and coordinates. I'm about 75 minutes away and I'll cut and run if I

Re: Stus-List Cutlass bearing removal tool

For 50 I would buy it. The one I saw was 400! Can you point me in the right direction? On Friday, December 13, 2013, Josh Muckley wrote: > Nope, but if you end up buying one... I remember seeing one where you > didn't have to remove the shaft. I think it ran about $50. > > Josh > On Dec 13, 201

Re: Stus-List Cutlass bearing removal tool

Don't forget that you have to remove the prop as well. Rob Abbott AZURA C&C 32 - 84 Halifax, N.S. On Dec 13, 2013 8:28 AM, "Joel Aronson" > wrote: All, Does anyone in the Annapolis area have a cutlass bearing removal tool for a 1 inch shaft that I c

Re: Stus-List Cutlass bearing removal tool

Nope, but if you end up buying one... I remember seeing one where you didn't have to remove the shaft. I think it ran about $50. Josh On Dec 13, 2013 8:28 AM, "Joel Aronson" wrote: > All, > > Does anyone in the Annapolis area have a cutlass bearing removal tool for > a 1 inch shaft that I could