Re: Stus-List Bow light

And per my prior post...wire is not moving. This is a fall job. Ugh. Sent from my Verizon 4G LTE smartphone Original message From: Joel Aronson via CnC-List Date: 8/9/17 3:22 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Joel Aronson Subject: Re: Stus-List Bow light I

Re: Stus-List Bow light

I tried that. It jammed and parted. That's why is was such a PIA. Good luck David! Virus-free. www.avg.com

Re: Stus-List Bow light

I used the old wire to pull the new! It may have been dumb luck though! Sometimes even I get some dumb luck! Rick Paikea 37/40 Friday Harbor until 10:00 today and then off to Orcas. Rick Rohwer 509 306 1094 > On Aug 9, 2017, at 06:24, Joel Aronson via CnC-List > wrote: > > It is a PIA job!

Re: Stus-List Bow light

It is a PIA job! I manged to feed the wire from the bottom and grab the end of the wire with needle nose pliers at the exit hole. Spray the wire with McLube. It will feed easier. Joel On Wed, Aug 9, 2017 at 8:53 AM, David via CnC-List wrote: > So I am trying to replace the bow light wire in

Re: Stus-List Bow Light...now snaking best practices

sale)Lf38  Significant Other LF39  Original message From: "Dennis C. via CnC-List" Date: 7/16/17 12:23 (GMT-08:00) To: CnClist Cc: "Dennis C." Subject: Re: Stus-List Bow Light...now snaking best practices Some thoughts. If it's a welded pulpit ba

Re: Stus-List Bow Light...now snaking best practices

thanks in advance. > > 1981 40-2 > > > > Sent from my Verizon 4G LTE smartphone > > > Original message > From: svpegasus38 via CnC-List > Date: 7/16/17 1:40 PM (GMT-05:00) > To: cnc-list@cnc-list.com > Cc: svpegasus38 > Subject: Re: Stus-

Re: Stus-List Bow Light...now snaking best practices

:40 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: svpegasus38 Subject: Re: Stus-List Bow Light... You have a corroded wire/connection somewhere in the run. Most likely it is in or near the anchor locker. Or the fixture its self.Look for corrosion at any location where moisture could be. Water can

Re: Stus-List Bow Light...

-List Bow Light... You have a corroded wire/connection somewhere in the run. Most likely it is in or near the anchor locker. Or the fixture its self.Look for corrosion at any location where moisture could be. Water can wick up a wire several feet corroding it all the way. You can splice on new

Re: Stus-List Bow Light...

You have a corroded wire/connection somewhere in the run. Most likely it is in or near the anchor locker. Or the fixture its self.Look for corrosion at any location where moisture could be. Water can wick up a wire several feet corroding it all the way. You can splice on new wire maybe in v-bert