--
> *From: *"Bruce Whitmore via CnC-List"
> *To: *"cnc-list"
> *Cc: *"Bruce Whitmore"
> *Sent: *Wednesday, April 12, 2017 3:15:31 PM
> *Subject: *Re: Stus-List Adhesive Sealant for Bilge Pump
>
> I tried 5200 on my 1977 C&C 27 MKIII a few yea
before?
Cheers,
Randy
- Original Message -
From: "Bruce Whitmore via CnC-List"
To: "cnc-list"
Cc: "Bruce Whitmore"
Sent: Wednesday, April 12, 2017 3:15:31 PM
Subject: Re: Stus-List Adhesive Sealant for Bilge Pump
I tried 5200 on my 1977 C&C 27 MKI
From: "Dennis C. via CnC-List"
To: "CnClist"
Cc: "Dennis"
Sent: Wednesday, April 12, 2017 1:06:17 PM
Subject: Re: Stus-List Adhesive Sealant for Bilge Pump
Randy,
Can you glue a small piece of teak to the bilge floor with 5200 and screw the
strainer to that?
I tried 5200 on my 1977 C&C 27 MKIII a few years ago and it peeled odd the
fiberglass in the bilge. My new to me boat used a piece of 1" wide thin
stainless which was bent 90 degrees at the bottom. The pump was screwed to
that and a small hole or two were drilled high up where it could be scre
Randy,
Can you glue a small piece of teak to the bilge floor with 5200 and screw
the strainer to that?
Dennis C.
On Wed, Apr 12, 2017 at 1:19 PM, RANDY via CnC-List
wrote:
> Listers-
>
> Rule bilge pumps snap into plastic strainers, which Rule's installation
> instructions say to be screw in t
You can usually affix (with screws) the pump to some sort of frame or
carrier (metal, wood, or fiberglass). The carrier gets lowered vertically
into the bilge and affixed to some other vertical stringer or bulkhead.
You can even make metal ones simply "hook" over a stringer and then pin it
beneath
Velcro!
Joel
On Wed, Apr 12, 2017 at 2:19 PM, RANDY via CnC-List
wrote:
> Listers-
>
> Rule bilge pumps snap into plastic strainers, which Rule's installation
> instructions say to be screw in to the bilge to keep the pump in place. I
> don't think I want to go drilling screw holes into the bo
