I looked at a few C&C 25 Mk 2's before I bought my Mk 1.
Some of the early C&C 25 Mk 2's had an issue where that arch over the door in
the cabin supports the mast step. I believe there was a recall to reinforce
the area and then at some point in the production run a design change.
With an extr
Thanks for the input Chuck.
Sent from Yahoo Mail on Android
On Wed, Sep 19, 2018 at 10:02 AM, Chuck Gilchrest via
CnC-List wrote:
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated.
Thank you Bill!
On Wed, Sep 19, 2018 at 2:14 PM, Bill Dakin via
CnC-List wrote:
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
Thanks for the input, very much appreciated!
On Wed, Sep 19, 2018 at 9:56 AM, Rick Taillieu via
CnC-List wrote:
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to
Our 25-2 ('81) was in good shape when we bought her in February 2017. I
never thought once in pulling the OMC for an outboard, the transom is just
too nice and it pushes us easily to 6kts, though I rarely exceed 3.5kts. A
decision made more firm with the purchase of a spare OMC. I priced an
elect
StephenC&C 25 - Sweet ChariotWashington DC
-- Forwarded message --
From: Roger Slade
To: "cnc-list@cnc-list.com"
Cc:
Bcc:
Date: Wed, 19 Sep 2018 14:26:42 + (UTC)
Subject: Re: Stus-List 1982 C&C 25
Thanks all for the input, soun
I have a 1983 24, not a 25, but it's a solid hull, not sure that an older 25
would be cored, but as always, I could be wrong. Just in case they have similar
construction, I'll mention a couple of things on mine that needed immediate
attention: The deck to hull bolts all the way around were a lit
7 am
Subject: Re: Stus-List 1982 C&C 25
Thanks all for the input, sounds like this is the right place to get info. on
these boats!
On Wed, Sep 19, 2018 at 9:56 AM, Rick Taillieu via
CnC-List wrote:
___
Thanks everyone for support
Thanks all for the input, sounds like this is the right place to get info. on
these boats!
On Wed, Sep 19, 2018 at 9:56 AM, Rick Taillieu via
CnC-List wrote:
___
Thanks everyone for supporting this list with your contributions. E
Of David via
CnC-List
Sent: Wednesday, September 19, 2018 8:41 AM
To: cnc-list@cnc-list.com
Cc: David
Subject: Re: Stus-List 1982 C&C 25
Roger,
Good luck with your search.
_
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_cam
Thought about electric?
Sent from my iPhone
On Sep 19, 2018, at 8:41 AM, David via CnC-List
mailto:cnc-list@cnc-list.com>> wrote:
Roger,
Good luck with your search.
No opinion on the boat but lots of experience with outboards hung on transoms.
If you are sailing in relatively calm waters th
Hi Roger,
The ’82 C&C 25 you are looking at would be a Mk2 model.
They have a different deck, keel and cabin layout than the Mk1s.
The deck is cored but not the hull, check for stress cracks around deck
fittings and where the cabin doghouse meets the deck and for
delamination/rotten core ar
Roger; welcome to the listI have owned a 1982 25 with a saildriveit
has a design flaw which is not worth repairing...water comes in through the
"grommet" on the shaft : I rebuilt mine 3 times before putting an outboard
on...best move. We simply glassed in the hole.
The 25 sails lik
Roger,
Good luck with your search.
No opinion on the boat but lots of experience with outboards hung on transoms.
If you are sailing in relatively calm waters they are fine. In any kind of a
seaway, however, all you will get is lots o' noise with very little thrust at a
time you probably ne
14 matches
Mail list logo
