I have a 30-2 and both my tanks have leaked.
The v-berth was easy as I simply replaced the gray, "RV-like" elbow with a
BARBED 90 degree elbow, reinforced tubing, a SS clamp, and plumber's tape.
On the starboard tank, the exit hole for the fitting was leaking due to a
hairline crack in the thr
August 29, 2017 2:34 PM
Subject: Re: Stus-List 1980 Water Systems Questions
Must have had great quality control to replicate the same failure ;-)
I have been on a few 30-1, no two the same so far but all great boats.
I was racing last Tuesday, had the rarely used blade up and a full main at
Must have had great quality control to replicate the same failure ;-)
I have been on a few 30-1, no two the same so far but all great boats.
I was racing last Tuesday, had the rarely used blade up and a full main at 20 -
25 kts.
A wind line took us to 36 kts, eased the main and jib off to sit at
: Re: Stus-List 1980 Water Systems Questions
The tanks on my '77 C&C 30 are fiberglass and built with the hull as part of
the tank. The top of the
forward tank is also the base of the V-berth. There are removable round access
ports and a screwed
down access panel on both tanks.
Mich
cracked tank.
Good luck,
Bruce.
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Michael Brown via CnC-List
Date: 8/28/17 10:19 PM (GMT-05:00) To:
cnc-list@cnc-list.com Cc: Michael Brown Subject: Re: Stus-List
1980 Water Systems Questions
The tanks o
The tanks on my '77 C&C 30 are fiberglass and built with the hull as part of
the tank. The top of the
forward tank is also the base of the V-berth. There are removable round access
ports and a screwed
down access panel on both tanks.
Michael Brown
Windburn
C&C 30-1
Date: Mon, 28 Aug 2017 20:2
I did repair the tanks on our '90 30-2 by drilling out the crack, flame
treatment and GFlex. I repaired it last year and kept the tank full this
year with no issues.
Chad
On Aug 28, 2017 8:21 PM, "Marek Dziedzic via CnC-List" <
cnc-list@cnc-list.com> wrote:
> If you look back in the archives, th
If you look back in the archives, there was discussions on water tanks repair
within the last 4 weeks.
If you have a leak at the fitting, possibly, you may just need to replace it.
I had some surprisingly good results with a Bondic welding kit.
And yes, most sinks drain directly overboard
