Re: Stus-List 1980 C&C36 Headliner Panels

2016-01-26 Thread jtsails via CnC-List
gasu...@gmail.com Subject: Re: Stus-List 1980 C&C36 Headliner Panels I have 2 panels with a goog amount of curve. When I put them up, I started on the end with the least amount of bend putting screws every 8 inches. (reason for brass screws). I did use 3ply veneer. I didn't pay attention to gr

Re: Stus-List 1980 C&C36 Headliner Panels

2016-01-26 Thread svpegasus38
I have 2 panels with a goog amount of curve. When I put them up, I started on the end with the least amount of bend putting screws every 8 inches. (reason for brass screws). I did use 3ply veneer. I didn't pay attention to grain as I was trying for maximum useage of each sheet of wood.

Re: Stus-List 1980 C&C36 Headliner Panels

2016-01-26 Thread sthoma20--- via CnC-List
The panels over the galley and nav station on this boat would have a curve to them. Were any of the panels on your 38 curved much? If so, how did you work that out with 1/4" plywood? I was thinking that 1/8" would work ok, but that 1/4" might have to be steamed, or slotted on the back, or somet

Re: Stus-List 1980 C&C36 Headliner Panels

2016-01-25 Thread svpegasus38
I replaced my panels with varnished African mahogany 1/4" plywood. Used brass screws to hold them up.  Doug MountjoysvPegasusLF38 just west of Ballard, WA. -- Original message--From: Dennis C. via CnC-ListDate: Mon, Jan 25, 2016 13:07To: CnClist;Cc: Dennis C.;Subject

Re: Stus-List 1980 C&C36 Headliner Panels

2016-01-25 Thread Martin DeYoung via CnC-List
boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Monday, January 25, 2016 1:06 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List 1980 C&C36 Headliner Panels I have been trying to find that plastic at mcmaster.com<http://mcmaster.com> for a couple years now. Earlier t

Re: Stus-List 1980 C&C36 Headliner Panels

2016-01-25 Thread Dennis C. via CnC-List
I have been trying to find that plastic at mcmaster.com for a couple years now. Earlier today I emailed them for help. They sent me a link to a plastics selector pack, () which contains several different samples of plastics. I'm not excited about paying $57 for a

Re: Stus-List 1980 C&C36 Headliner Panels

2016-01-25 Thread Dave Godwin via CnC-List
Steve, Like Dennis, I used some sort of plastic sheet (4’ x 8’ x ~1/8") the was similar, white with a grain/rough surface on one side and completely smooth on the other. I used the textured side and did like Wally Bryant on his LF 38 and used SS oval screws with SS decorative washers to hold th

Re: Stus-List 1980 C&C36 Headliner Panels

2016-01-25 Thread Dennis C. via CnC-List
Steve, I replaced the original old yellowed winch bolt access panels on Touche' with plastic sheet from mcmaster.com. It was 1/8 or so thick, smooth on one side and textured on the other. It looks very nice and was easy to cut and finish. I countersunk the fastener holes for #6 or 8 flat heads.

Re: Stus-List 1980 C&C36 Headliner Panels

2016-01-25 Thread Gary Nylander via CnC-List
On my 1980 30, they are 1/8 white plastic of some variety. Gary From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Monday, January 25, 2016 10:47 AM To: cnc-list@cnc-list.com Cc: Joel Aronson Subject: Re: Stus-List 1980 C&C36 Headl

Re: Stus-List 1980 C&C36 Headliner Panels

2016-01-25 Thread Bill Coleman via CnC-List
bject: Re: Stus-List 1980 C&C36 Headliner Panels Yes. Bill Coleman via CnC-List wrote: > Are you talking about the cover panels that you remove to get at bolts? > > Bill Coleman > C&C 39 Erie, PA > > -Original Message- > From: CnC-List [mailto:cnc-l

Re: Stus-List 1980 C&C36 Headliner Panels

2016-01-25 Thread Joel Aronson via CnC-List
On my 83 35/3 they were 1/8 plywood covered with a vinyl textured wallpaper that matched the color of the fiberglass. Some folks have used various plastics as replacements. Joel 35/3 The Office Annapolis On Mon, Jan 25, 2016 at 10:41 AM, sthoma20--- via CnC-List < cnc-list@cnc-list.com> wrote:

Re: Stus-List 1980 C&C36 Headliner Panels

2016-01-25 Thread sthoma20--- via CnC-List
Yes. Bill Coleman via CnC-List wrote: > Are you talking about the cover panels that you remove to get at bolts? > > Bill Coleman > C&C 39 Erie, PA > > -Original Message- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of > sthoma20--- via CnC-List > Sent: Monday,

Re: Stus-List 1980 C&C36 Headliner Panels

2016-01-25 Thread Bill Coleman via CnC-List
Are you talking about the cover panels that you remove to get at bolts? Bill Coleman C&C 39 Erie, PA -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of sthoma20--- via CnC-List Sent: Monday, January 25, 2016 9:22 AM To: cnc-list@cnc-list.com Cc: sthom...