Stus-List Re: Knot vs. Splice

Allows you to end for end the halyard without cutting off a splice. Sent from my iPhone > On Aug 4, 2025, at 12:41 PM, Sailmail via CnC-List > wrote: > >  > "I am thinking of just using the knot when I replace the halyard instead of > the splice" > > The Halyard Hitch has worked well for eon

Stus-List Re: new jib sheet

Tyrus from Nova Braid would be my choice. Cajun should have it. Sent from my iPhone > On May 26, 2024, at 12:24 PM, ssjohnson--- via CnC-List > wrote: > >  > Go to Cajun Ropes...they have line sets for most CnC's. They have done all > my lines - including wire-to-rope halyards - I have alwa

Stus-List Re: NYYC AC40, Pensacola Bay and trip from Louisiana

I believe Awk Craft 2000 can only be sprayed. It is not to be brushed or rolled on. Mine has 3 coats of Awk Craft clear gloss which helps protect the paint and the surface and is easier to buff out scratches unless they go to the primer then you are into repair and touching up with a spray rep

Stus-List Re: Yanmar 2 GMF

If replaced should be good just a common problem with the symptoms you described. Rod Sent from my iPhone > On Jun 26, 2022, at 9:50 PM, Robert Abbott wrote: > >  Rod > > Mixing elbow, muffler (from small SS to larger resin) and exhaust hose were > all replaced a few years back. I'd be

Stus-List Re: Yanmar 2 GMF

Mixing elbow can cause problems like you experienced. From: Robert Abbott via CnC-List Sent: June-26-22 12:40 PM To: Josh ; Stus-List Cc: Robert Abbott Subject: Stus-List Yanmar 2 GMF Bottom and prop is cleanboat is launched every Spring after Winter layup. Checked the throttle cab

Stus-List Re: Andrew Burton

Congratulations, well done Andy under dome trying conditions Sent from my iPhone > On Jun 22, 2022, at 12:46 PM, Andrew Burton via CnC-List > wrote: > > Thanks, Joel! I learned all I know sailing my Dads C&C 27. > Andy > > Andrew Burton > 26 Beacon Hill > Newport, RI > USA 02840 > > +401

Stus-List Re: Chainplate Sealing.

3M 4200 From: John McCrea via CnC-List Sent: March-21-22 5:28 PM To: 'Stus-List' Cc: johnmcc...@comcast.net Subject: Stus-List Chainplate Sealing. Hello. I have a leak on my port side chainplate that needs addressing. I pulled both chainplate cover plates and noticed that I had a stainle

Stus-List Re: Mystic Seaport Panorama Exhibit

Impressive Chuck thanks for sharing. Rod Halifax From: CHARLES SCHEAFFER via CnC-List Sent: March-08-22 4:47 PM To: CNC boat owners, cnc-list Cc: CHARLES SCHEAFFER Subject: Stus-List Mystic Seaport Panorama Exhibit FYI, Mystic Seaport in Connecticut is losing an amazing exhibit Mar

Stus-List Re: List problems

Came through fine no problems since you dropped the link in the footer. Rod -Original Message- From: Stu via CnC-List Sent: March-08-22 10:44 AM To: C&C Email List Cc: Stu Subject: Stus-List List problems I guess I was wrong. The problems started when I put the cutting board footer

Stus-List Re: List problems

Second one that came through fine in Outlook. Tod -Original Message- From: Matt Wolford via CnC-List Sent: March-07-22 10:01 PM To: 'Stus-List' Cc: wolf...@erie.net Subject: Stus-List Re: List problems Stu: I was using Outlook on a Windows 10 machine when it started. Today I

Stus-List Re: List problems

First message that came through fine in Outlook in several weeks, hopefully, problem solved> Rod Halifax -Original Message- From: Stu via CnC-List Sent: March-07-22 9:23 PM To: C&C Email List Cc: Stu Subject: Stus-List List problems I have removed the footer with an external link.

Stus-List Re: 35-3 Bimini question

All emails now coming through as untitled attachments in outlook on my desktop and full messages coming through on my Iphone as normal. From: Dave S via CnC-List Sent: March-05-22 7:48 PM To: Stus-List Cc: Dave S Subject: Stus-List Re: 35-3 Bimini question Customized C&C Cutting Boa

Stus-List Re: C&C33-2 New Genoa

Why not a 155% Genoa if you are racing? Sent from my iPhone > On Mar 1, 2022, at 8:48 PM, andrew--- via CnC-List > wrote: > >  > Good day sailors! > > I am getting a new X-Drive Endure Genoa for my 33-2. Sailmaker thought 140 > would be best but given the predominantly light air we sail

Stus-List Re: Cutting Board Sale

Site not accessible -Original Message- From: Stu via CnC-List Sent: February-21-22 9:12 AM To: C&C Email List Cc: Stu Subject: Stus-List Cutting Board Sale Don't forget -- today and today only -- free boat name and special font on all cutting boards. http://www.cncphotoalbum.com/

Stus-List Re: Used Tuff Luff or Harken carbo foil

Legacy III > 1982 C&C 34 > Noank, CT > > From: Rod Stright via CnC-List [mailto:cnc-list@cnc-list.com] > Sent: Tuesday, December 21, 2021 5:28 AM > To: 'Stus-List' > Cc: Rod Stright > Subject: Stus-List Used Tuff Luff or Harken carbo foil > > Hey Folks, &

Stus-List Used Tuff Luff or Harken carbo foil

Hey Folks, Does anyone have a used racing foil they are no longer using? Tuff Luff or Harken #6 luff tape and approx. 45' in length. Rod Stright Halifax Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to t

Stus-List Re: C&C 33-2 Used Spinnaker wanted

Mine is close within a foot on height and the right width. $400 and likely $100 or less to ship from Halifax. From: John Read via CnC-List Sent: November-14-21 3:09 PM To: Stus-List Cc: John Read Subject: Stus-List Re: C&C 33-2 Used Spinnaker wanted Located Groton CT On Sun, Nov 1

Stus-List Source for sheaves

I am looking for some 2" sheaves for the end of my boom (4). I believe the old ones were Delrin or some sort of plastic and the sun took its tool. I believe someone had a very good source for sheaves on the list. Rod Stright Halifax Thanks to all of the subscribers that contributed to the l

Stus-List Re: Windstar

http://cncwindstar.blogspot.com/search/label/Solar%20and%20Batteries Lots of good ideas there. I bookmarked it. On Oct 11, 2021, at 9:48 AM, Rod Stright via CnC-List mailto:cnc-list@cnc-list.com> > wrote:  Just wondering if anyone has the link to I believe it was Windstar (C&C 33

Stus-List Windstar

Just wondering if anyone has the link to I believe it was Windstar (C&C 33 ?) who had all his projects organized in albums. Want to try and develop something similar. Thanks Rod Stright Halifax Thanks to all of the subscribers that contributed to the list to help with the costs involved.

Stus-List Re: Eva faux decking

ks very nice. > > Mike > > From: Rod Stright via CnC-List > Sent: September 20, 2021 8:55 AM > To: 'Stus-List' > Cc: Rod Stright > Subject: Stus-List Eva faux decking > > Has anyone use the EVA teak marine decking? If so do you recommend it and

Stus-List Eva faux decking

Has anyone use the EVA teak marine decking? If so do you recommend it and are you aware of a supplier here in Canada and/or Nova Scotia? Rod Halifax Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list

Stus-List Re: C&C 40 TRDK

Or Night Train? From: Hoyt, Mike via CnC-List Sent: September-18-21 6:28 PM To: Stus-List Cc: Hoyt, Mike Subject: Stus-List Re: C&C 40 TRDK Hi Graham Is that Mischief? Mike hoyt Persistence Halifax _ From: Graham Collins via CnC-List mailto:cnc-list@cnc-list.com> > Sent: Se

Stus-List Re: [EXTERNAL] Re: Balsa core history

Yes that old foam is crap. The new Coosa https://coosacomposites.com/the-coosa-advantage/ and equivalents do not soak up water and are put together under tons of pressure. From: Della Barba, Joe via CnC-List Sent: September-17-21 11:21 AM To: Stus-List Cc: Della Barba, Joe Subject: Stus-

Stus-List Re: Balsa core history

Coosa is an excellent product for a core. Expensive it worth every penny Sent from my iPhone > On Sep 17, 2021, at 11:55 AM, Neil Andersen via CnC-List > wrote: > >  > Some of the new coring material (divinicell??) is supposed to address the > balsa/foam issues. > > Anyone with specific k

Stus-List Re: Boat Donation to Charity?

Mass Maritime Academy Sent from my iPhone > On Sep 11, 2021, at 2:15 PM, Edd Schillay via CnC-List > wrote: > > Listers, > > Any suggestions on a good charity to donate a boat to? Preferably one that > will actually use the boat instead of selling it for charity funds (Fair > market value

Stus-List C&C 35 Mk 3 spinnaker for sale

One C&C 35 mk 3 North symmetrical spinnaker for sale in excellent condition. Email me for additional information and pictures if interested. Also flies well as an A kite and could also be recut as an asymmetrical. Rod Halifax Thanks to all of the subscribers that contributed to the list to

Stus-List Re: C&C 121 sail track access

Almost all of the deck fittings on the C&C 99 are tapped into aluminum backing plates that are embedded into the epoxy deck. Sent from my iPhone > On Aug 13, 2021, at 7:42 AM, Bob Tallman via CnC-List > wrote: > >  > Good morning all, > > This is my third C&C and still excited to sail her e

Stus-List Best spot to get Tee shirts

Where Is the source to get quality Tee shirts (long and short) custom made for C&C Yachts in Canada and the US? Rod Stright President C&C 99 Class Association Halifax Nova Scotia Rod Halifax Thanks to all of the subscribers that contributed to the list to help with the costs invol

Stus-List Re: Lewmar Small hatch handle

MMV, > > Charlie Nelson > Water Phantom > 1995 C&C XL/kcb > > > Sent from the all new AOL app for iOS > > On Thursday, July 22, 2021, 6:08 PM, Rod Stright via CnC-List > wrote: > > Anyone have experience with securing the handle on the small hatch hand

Stus-List Lewmar Small hatch handle

Anyone have experience with securing the handle on the small hatch handle. The handle in this case is glued to the hatch and is not through bolted like the bigger hatches. The newer version has a bolt through handle so I assume they have lost of issues with the handles falling off. I have used tw

Stus-List Re: solar fans

Any problem cutting holes in the plexiglass/Lexan or were they fibreglass hatches? Sent from my iPhone > On Jul 1, 2021, at 8:37 PM, CHARLES SCHEAFFER via CnC-List > wrote: > >  > I have one fan in the forward hatch, one in the head, one over the galley and > one over the opposite side of t

Stus-List Re: solar fans

Hey Chuck, Are the ones you have on this list https://www.google.com/search?q=deck+mounted+solar+fans+for+sailboats

Stus-List Wanted 135% genoa

Looking for a good used 135-140% genoa. Approximate dimensions Luff 43'6" to 44' 8", Leech 42 - 43' Foot approx. 19'. Foretriangle dimensions I 46', J 13' Luff tape Harken #6. Close to C&C 33 Mk 2. Can be dacron or laminate with or without sun cover. PM me at strig...@eastlink.ca Thanks to a

Stus-List Re: Gelcoat colour matching

I have a 2004 C&C 99 which has a vacuum bagged epoxy hull. The finish is a polyester gel coat. Here is a quote from Tim Jackett the designer from Tartan Yachts who built the boat “The gelcoat is NPG Isothalic, which is a polyester product.” So obviously it can be done with the proper preparati

Stus-List Re: FW: 2021 racing

ought us luck. No hollering, no fussing or cussing. Very fun. We > took second place. I'm still learning how to get more out of the main and > learn what his boat likes. > > Chuck S > > > On 05/06/2021 3:26 PM Rod Stright via CnC-List wrote: > > &g

Stus-List FW: 2021 racing

From: Rod Stright Sent: May-06-21 4:26 PM To: 'Stus-List' Subject: RE: Stus-List 2021 racing Hey Chuck was that Oasis (Hull #77), new owner David Copley, by any chance? Safe Sailing, Rod Stright President C&C 99 Class Association Halifax Nova Scotia From: CHA

Stus-List Re: Alternate to Spartite

Thanks Paul that looks like it would work From: s/v Johanna Rose via CnC-List Sent: April-26-21 10:16 PM To: cnc-list@cnc-list.com Cc: dre...@gmail.com Subject: Stus-List Re: Alternate to Spartite Rod, I have a copy of Wally’s Stella Blue page where he uses a Spartite alternative purcha

Stus-List Re: Removing lettering

I believe lacquer thinner will remove the residue from the numbers. Best to check with the sailmaker but I have done it before and then rinsed it with fresh water afterwards. From: Dennis C. via CnC-List Sent: April-22-21 1:59 PM To: Stus-List Cc: Dennis C. Subject: Stus-List Re: Removing

Stus-List Alternate to Spartite

Did someone have a similar product to use instead of Spartite? Rod Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu

Stus-List Re: Hello?

A lot are still showing up as junk Sent from my iPhone > On Apr 4, 2021, at 9:06 AM, Josh Muckley via CnC-List > wrote: > >  > Yep just quiet > >> On Sun, Apr 4, 2021, 08:01 WILLIAM WALKER via CnC-List >> wrote: >> So, I haven't gotten any emails for a couple days. None in spam or trash

Stus-List Re: Now best powerboats

Agree, there are enough emails already with out getting into powerboats From: Richard Bush via CnC-List Sent: March-31-21 2:53 PM To: cnc-list@cnc-list.com Cc: jlam...@outlook.com; Richard Bush Subject: Stus-List Re: Now best powerboats I would suggest that when the topic becomes "best

Stus-List Re: 40 or 41?

C&C 41 much nicer lines and performance. Took mine to the Caribbean and back from Halifax, very capable in sever sea and wind conditions up to 70 knots. From: Joe Della Barba via CnC-List Sent: March-29-21 12:49 PM To: 'Stus-List' Cc: j...@dellabarba.com Subject: Stus-List 40 or 41? Is

Stus-List Re: Now stink boaters anonymous

No wonder it is all winding up in Spam or Junk mail. -Original Message- From: JP Mail via CnC-List Sent: March-19-21 3:10 PM To: Stus-List Cc: JP Mail Subject: Stus-List Re: Now stink boaters anonymous Everyone’s coming out of the hanging locker I guess. 1979 Chaparral 20’ 1986 merc

Stus-List Re: C&C 40

h their rep in Marblehead Mass. Their current ad says that they fit all saildrive models. The price seems to fall between $1295 - $1695 depending on diameter …….13” to 18”.. Ron C. From: Rod Stright via CnC-List mailto:cnc-list@cnc-list.com> > Sent: Thursday, March 18, 2021 12:02 PM To: &#

Stus-List Re: C&C 40

I Have a C&C 99 with the standard Volvo Penta saildrive. Curious about the Flex-O-Fold. I had a max prop on my last boat and loved it. Was the Flex-O-Fold a direct fit for the sail drive and what was the approx. cost? Thanks Rod From: Ron Casciato via CnC-List Sent: March-18-21 12:32

Stus-List Re: Precision Sails - sailmakers in Canada

Yes and very good cruising sails From: Glen Eddie via CnC-List Sent: March-16-21 11:21 AM To: Stus-List Cc: Hoyt, Mike ; Glen Eddie Subject: Stus-List Re: Precision Sails - sailmakers in Canada Does Stevens still do the sails for the Blue Nose? Glen Eddie Tel: 416-777-535

Stus-List Re: midship cleats on aluminum rail?

We have the Wichard ones (three on each side) fitted for snatch and spinnaker blocks and the one fitted amidships works very well for the spinnaker guy blocks and also for securing dock lines when back alongside. Safe Sailing, Rod Stright President C&C 99 Class Association Halifax N

Stus-List FW: Re: FW: Re: Interior 'walls'

router and some appropriate wood and have at it myself. Thanks in advance for any further help--as well as your terminology lesson! Charlie Nelson 1995 C&C 36 XL/kcb Water Phantom -Original Message- From: Rod Stright via CnC-List mailto:cnc-list@cnc-list.com> > To: 'Stus-L

Stus-List Re: Painting substitution question

Any idea what it was called? From: John McCrea via CnC-List Sent: February-26-21 10:32 AM To: 'Stus-List' Cc: John McCrea Subject: Stus-List Re: Painting substitution question Jamestown Marine in RI has a one-part topside paint that a club member used and it came out really nice. They

Stus-List Re: North Asym for sale

Where is it located? Sent from my iPhone > On Feb 14, 2021, at 12:08 PM, pete.shelquist--- via CnC-List > wrote: > >  > For Sale: North Red/White/Blue Asym spin with turtle. > Leach= 46’ Luff= 49’ Foot= 24’7” > Fair condition, $200+shipping > > > > Thanks to all of the subscribers

Stus-List Re: New sails, new wind

That should have read PHRF NC rules From: Rod Stright via CnC-List Sent: February-09-21 12:01 PM To: cenel...@aol.com Cc: 'Stus-List' ; Rod Stright Subject: Stus-List Re: New sails, new wind >From PHRF NS Handicap Racing Fleet Rules section 3 “HANDICAP ADJUSTMENTS

Stus-List Re: New sails, new wind

>From PHRF NS Handicap Racing Fleet Rules section 3 “HANDICAP ADJUSTMENTS A. HEADSAILS Adjustment is based on the largest jib or genoa and determined by the LP/J ratio stated as a percent. No adjustment is made for the largest headsail having an LP/J greater than 135% and less than or equal

Stus-List Re: New sails, new wind

se the 140 for the slightly breezier days and forego the reef _ From: Rod Stright via CnC-List mailto:cnc-list@cnc-list.com> > Sent: February 9, 2021 5:30:15 AM To: 'Stus-List' Cc: Rod Stright Subject: Stus-List Re: New sails, new wind Would you get a PHRF adjustment credit

Stus-List Re: New sails, new wind

Would you get a PHRF adjustment credit by moving to a 135% Roller Furling headsail? Rod Stright Halifax From: Charlie Nelson via CnC-List Sent: February-09-21 12:23 AM To: cnc-list@cnc-list.com Cc: cenel...@aol.com Subject: Stus-List New sails, new wind Hello all listers. I ha

Stus-List Re: FW: Re: Interior 'walls'

#x27;ceiling' with the grooves already cut. Alternatively, I may have to take a replacement piece of wood to a local woodshed and have grooves routed in it or buy a router and some appropriate wood and have at it myself. Thanks in advance for any further help--as well as your termin

Stus-List FW: Re: FW: Re: Interior 'walls'

have grooves routed in it or buy a router and some appropriate wood and have at it myself. Thanks in advance for any further help--as well as your terminology lesson! Charlie Nelson 1995 C&C 36 XL/kcb Water Phantom -Original Message- From: Rod Stright via CnC-List mailto:cnc-li

Stus-List FW: Re: Interior 'walls'

Hi fellow C&C 99 owners, On the inside of the hull the covering applied is properly called a ceiling. I am from a family of wooden boatbuilders and we don't like to use terminology associated with houses on boats but ceiling is defined below from the Glossary of Nautical terms. ceiling Planking

Stus-List Re: Navtec hydraulic backstay

Strictly Hydraulics in Burnside, very good at ir. Rod From: dwight veinot via CnC-List Sent: January-20-21 5:45 PM To: cnc-list@cnc-list.com Cc: dwight veinot Subject: Stus-List Navtec hydraulic backstay Mine needs some seals replaced. Can anyone in the Halifax Nova Scotia area refe

Stus-List Re: Screw removal

Wow more than 30 emails on removing a screw. From: Adam Hayden via CnC-List Sent: January-15-21 7:40 PM To: Stus-List Cc: Adam Hayden Subject: Stus-List Re: Screw removal Hey everyone Thanks for all the advice and suggestions. I have added some new tools (thanks Dennis).

Stus-List Re: Americas Cup racing

Was there an attachment or a link? From: CHARLES SCHEAFFER via CnC-List Sent: December-23-20 12:55 PM To: Stus-List Cc: Della Barba, Joe ; CHARLES SCHEAFFER Subject: Stus-List Re: Americas Cup racing You'll probably like this video and seeing J-Class boats in action. Note the number

Re: Stus-List Sunglasses favorites

Agree they are great but so are Costa Tuna Alley https://www.youtube.com/watch?v=-MPqaI2bN9Q and they do provide some support to the marine environment. Rod From: CnC-List On Behalf Of Hoyt, Mike via CnC-List Sent: August-10-20 9:27 AM To:

Re: Stus-List Standard Horizon VH-310 RAM mic to a new home

Hi Mike checked it out with Standard Horizon and apparently the VH-310 RAM will not work with my SH Intrepid so I must decline your generous offer and pay it forward to John. My boat is a 2004 and is all wired up for a and requires a CMP23 Ram microphone. That series has been unavailable since

Re: Stus-List Standard Horizon VH-310 RAM mic to a new home

Thanks Mike will let you know as soon as I find out if it is compatible Rod Sent from my iPhone > On Jul 26, 2020, at 6:24 PM, Hoyt, Mike via CnC-List > wrote: > >  > Order is Rod first, John 2nd, David 4rd based on time of response. Advise to > check with Std Horizon first to ensure com

Re: Stus-List Standard Horizon VH-310 RAM mic to a new home

May work for me Mike I’ll check next time on the boat, Mike missing plug still there. Rod Equinox 99 From: CnC-List On Behalf Of Hoyt, Mike via CnC-List Sent: July-26-20 10:23 AM To: 'cnc-list@cnc-list.com' Cc: Hoyt, Mike Subject: Stus-List Standard Horizon VH-310 RAM mic to a new hom

Re: Stus-List EV100 Wheel Pilot clutch

Didn’t work the first time but does now. Thanks From: CnC-List On Behalf Of David Knecht via CnC-List Sent: July-23-20 2:19 PM To: CnC CnC discussion list Cc: David Knecht Subject: Re: Stus-List EV100 Wheel Pilot clutch I set it to allow sharing for anyone with the link but for some

Re: Stus-List C&C 99

Here the deep keel is 99 and the shoal draft is 105. They sail well in all conditions and handle the 200% spinnaker well. Ours here are fitted with an 18” custom made stainless steel sprit which allows us to fly the asymmetrical as well. Safe Sailing, Rod Stright President C&C 99 C

Re: Stus-List Sailing with a spin thru the lee of a bigger boat

9.9 meters From: CnC-List On Behalf Of Joel Delamirande via CnC-List Sent: July-22-20 7:01 PM To: cnc-list@cnc-list.com Cc: Joel Delamirande Subject: Re: Stus-List Sailing with a spin thru the lee of a bigger boat Is 99 mean 99 feet boat On Tue, Jul 21, 2020 at 1:17 PM Hoyt, Mike via

Re: Stus-List Sailing with a spin thru the lee of a bigger boat

Yes hull #1 was called Rabbit and was basically a stripped out boat that they added a long retractable sprit to and a 54” wheel. The boat was sold and now has an interior. Rod Stright President C&C 99 Class Association Halifax Nova Scotia From: CnC-List On Behalf Of Hoyt, Mi

Stus-List Recall: Latitudes and Attitudes Free Online Subscription

Rod Stright would like to recall the message, "Stus-List Latitudes and Attitudes Free Online Subscription". <>___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the l

Stus-List C&C 29 Mark 1 Rudder Installation Drawings

Does anyone have the diagram/drawing for the C&C 29 Mk 1rudder and rudder stock/shaft installation or photos of the fitting used where the rudder stock comes through the cockpit sole? Asking for a friend who is trying to repair/rebuild his. I understand these boats have/had no bushings. Thank

Re: Stus-List Latitudes and Attitudes Free Online Subscription

Does anyone have the diagram/drawing for the C&C 29 Mk 1rudder and rudder stock/shaft installation or photos of the fitting used where the rudder stock comes through the cockpit sole? Asking for a friend who is trying to repair/rebuild his. I understand these boats have/had no bushings. Th

Stus-List Removing bleed through from masking tape.

Just finished painting the three boot stripes on my C&C 99. They look great but as expected, although the Frog masking tape was great and left a sharp lines there are a couple of areas where the paint bled through the making tape. Anyone have any secrets for cleaning that up, other than an exa

Stus-List Refinishing Boot Top

Has anyone refinished/repainted their boot top? I have three stripes, which I believe are AwlGrip, that are showing a bit of wear especially the lower one where the PO sanded through the edges of the boot top when sanding the bottom. A big job to refinish all three especially if I have to have

Re: Stus-List Spring Fever

Here it is Russ, https://www.tc.gc.ca/documents/2019-2020-AA-36-COVID-19_SOCIAL_DISTANCING_BOATERS_17x11_EN_V05_ACC.PDF The problem I have with the social distancing guidelines is that there is no provision for safety concerns or variations for the length of the vessel. As you are no doubt

Re: Stus-List Spring Fever

er > 1983 C&C 35-3, #028, "Grace" > Whitehall, Michigan > WLYC > > On 5/3/2020 5:40 PM, Rod Stright via CnC-List wrote: >> Are you allowed to race and is it family only on the boat or do they allow >> you have a physically distanced crew, like maybe

Re: Stus-List Spring Fever

Are you allowed to race and is it family only on the boat or do they allow you have a physically distanced crew, like maybe 3? From: CnC-List On Behalf Of schiller via CnC-List Sent: May-03-20 5:35 PM To: cnc-list@cnc-list.com Cc: schiller Subject: Stus-List Spring Fever Well, we've bro

Re: Stus-List Paddle Wheel Anti-fouling...?

Transducer paint From: CnC-List On Behalf Of David Risch via CnC-List Sent: April-13-20 12:33 PM To: CNC CNC Cc: David Risch Subject: Stus-List Paddle Wheel Anti-fouling...? My paddle wheel fouls if you just look at it...any solutions to reducing fouling (besides putting it in/taking it

Re: Stus-List Dumb question of the day - life rings, horseshoe or cushion?

Most Horseshoes are light, can’t be thrown in any wind and break apart with any load on them. Life rings are solid, strong and can be thrown effectively, built to Safety of Life at Sea at Convention (SOLAS) standards specified in the Life Saving Appliance (LSA) Code and satisfy Transport Canada

Re: Stus-List C&C 99 Class Association and Fleet

From: CnC-List On Behalf Of Donald Kern via CnC-List Sent: February-21-20 1:10 PM To: Rod Stright via CnC-List Cc: Donald Kern Subject: Re: Stus-List C&C 99 Class Association and Fleet Rod I have attached an extracted list of the C&C 99s that have come up on the cnc-list or PHRF fleet

Stus-List C&C 99 Class Association and Fleet

We are in the process of revitalising the C&C 99 class and have developed a new Class Association and website @ http://cnc99class.com/#home and are trying to track down the current inventory and ownership of C&C 99 fleet. If you own a C&C 99 and are not on our fleet

Stus-List Wanted - Used Practice Spinnaker

Hey Guys/Gals in case you ordered a new spinnaker this winter or are no longer racing I am looking for a used racing spinnaker in reasonable condition as a practice spinnaker. Luff approximately 46' and mid girth/foot approximately 26 - 27'. Boats I measurement 46' and J 14.5'. PM me at strig.

Stus-List Painting boot top

Has anyone repainted or touched up their boot top and if so how did it turn out? Rod Stright 2004 C&C 99 ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list

Re: Stus-List Fwd: Great Lakes water levels...for C&Cs now Erie Canal

Do we have enough posts about water levels? Anything about C&Cs would be nice😎 Sent from my iPhone > On Nov 26, 2019, at 3:43 PM, Richard Bush via CnC-List > wrote: > >  > Joe, I have a old 13 foot Whaler that we use on the Ohio River...it really > gets lost in the big Cruiser waves! >

Stus-List Used practice Spinnaker

Looking for a used spinnaker in good condition to be used as a practice sail. Approximate dimensions Luff 46' foot/mid girth 26.5'. PM me at strig...@eastlink.ca Rod ___ Thanks everyone for supporting this lis

Re: Stus-List Fwd: Fwd: Cabin Sole resurfacing

And how does it stand up to racing abuse, dropped winch handles, stains etc. Photos I saw online it looked pretty good. Rod Sent from my iPhone > On Nov 10, 2019, at 8:11 AM, bwhitmore via CnC-List > wrote: > >  > Hi Mike and group, > > If anyone has good photos of the installed Lonsea

Re: Stus-List Fwd: Fwd: Cabin Sole resurfacing

That would be great Mike, I believe you said you put a finish on it? I am located in Halifax, Nova Scotia and own a C&C 99 Rod Sent from my iPhone > On Nov 9, 2019, at 5:43 PM, Mike Taylor via CnC-List > wrote: > >  > Hi Rod > > Here is a link to the product I purchased from Defender. C

Re: Stus-List Practice Spinnaker

(at)gmail(dot)com Jeff On Mon., Oct. 7, 2019, 1:52 p.m. Rod Stright via CnC-List, mailto:cnc-list@cnc-list.com> > wrote: Just wondering if anyone out there has a used spinnaker that they are not using any longer. Looking for a spinnaker with a luff of approx. 46’ and a mid-girth and/

Stus-List Practice Spinnaker

Just wondering if anyone out there has a used spinnaker that they are not using any longer. Looking for a spinnaker with a luff of approx. 46’ and a mid-girth and/or foot of 26.5’. Dimensions not critical as it will be only used for practice. Rod Stright Halifax, NS -- This email has be

Re: Stus-List C&C Lister Roll Call

Hi Edd, Rod Stright/Equinox99/C&C 99 – 2004/ 056 / strig...@eastlink.ca / Halifax, NS, Canada Class website: http://cnc99class.com/ Facebook Group: https://www.facebook.com/groups/cnc99class/ Regards, Rod Stright President C&C 99 Class Association

Re: Stus-List Engine compartment bilge pump and blower

That is the law in Canada according to Transport Canada for enclosed gasoline engines here in Canada. Regards Rod Stright From: CnC-List On Behalf Of John Christopher via CnC-List Sent: September-30-19 1:22 PM To: Francois Rivard Cc: John Christopher ; cnc-list@cnc-list.com Subject: Re:

Re: Stus-List Adding cover to line

Locking wiping, whipping? From: CnC-List On Behalf Of Morgan Ellis via CnC-List Sent: June-26-19 3:04 PM To: cnc-list@cnc-list.com Cc: Morgan Ellis Subject: Re: Stus-List Adding cover to line The C&C 115 that I used to crew on had the same issue, tried smaller jaws in the clutch, which he

Stus-List One 9.5' SeaBright Inflatable tender c/w new 5HP outboard for sale

One like new 290P Seabright inflatable http://www.seabrightmarine.ca/sd290.html grey with blue trim c/w under seat storage bags, aluminum floorboards, storage bag and one 5 HP APS 4 stroke 5 HP outboard c/w cart and fuel tank. Both used less than 5 hours. Original cost $2600 plus tax. $2000 obo

Stus-List Used Nexus Instruments

Anyone out there have any used Nexus instruments they have replaced and no longer need that could be used for spares for a good working system. You can pm me at strig...@eastlink.ca to avoid bothering others on the site. Thanks Rod Halifax --- This email h

Re: Stus-List Replacing a CnC 44 Rudder

I would suggest Competition Composites in Ontario excellent workmanship,Canadian Rod Sent from my iPhone > On Apr 18, 2019, at 4:38 PM, Dan via CnC-List wrote: > > Has any C&C44 owners on the list replaced their rudder, and if so, where did > you have the work done? - The price is drama

Re: Stus-List 34 genoa sheets

to use. Btw. Listen to what Chuck says on ropes; he really knows this stuff (professionally!). Marek From: Rod Stright via CnC-List Sent: Friday, April 5, 2019 07:19 To: cnc-list@cnc-list.com Cc: Rod Stright Subject: Re: Stus-List 34 genoa sheets Check out Cajun ropes awesome prices

Re: Stus-List 34 genoa sheets

Check out Cajun ropes awesome prices and good rope https://www.facebook.com/CajunRopes/?ref=br_rs Rod From: CnC-List On Behalf Of John and Maryann Read via CnC-List Sent: April-05-19 8:16 AM To: cnc-list@cnc-list.com Cc: John and Maryann Read Subject: Stus-List 34 genoa sheets Am replaci

Re: Stus-List Mast Wedge Help

Anyone have any problem with the Spartite stick against the mast collar when hauling the mast out? Rod Stright Halifax From: CnC-List On Behalf Of Neil Andersen via CnC-List Sent: February-07-19 12:40 AM To: cnc-list@cnc-list.com; cnc-list@cnc-list.com Cc: Neil Andersen Subject: Re: Stu

Stus-List Wanted lightly used racing main

Looking for a lightly used racing mainsail for club racing luff max 40’ foot max 13’ in good condition. Maybe you quit racing😊 Contact Rod at strig...@eastlink.ca no need to bother everyone on the list. --- This email has been checked for viruses by Avast

Re: Stus-List 1974 36 mk2 questions

In my view, although older, the C&C 35 Mark 2 is a great all round boat. We won our class in the Marblehead to Halifax Ocean race in light airs, and on the trip down in strong headwinds and rough seas, the flare forward kept the bow from submarining into the waves when much larger boats couldn’

  1   2   >