Re: Stus-List Tell me about the 35 MKIII-CB

The C&C 35MKIII model had an issue with the attachment of the keel. Not all, but some. Very serious, check it out. Virus-free. www.avg.com

Re: Stus-List 1981 C&C 36' - Fresh Water Tank Replacement

*Re: fixing water tanks:* You do not need the TAP stuff, just use West System epoxy. You have to pre-heat with the torch as he says. I used some glass cloth and it has worked fine. You have nothing to lose. Mike Casey Halifax, Nova Scotia C&C 30 1980

Re: Stus-List 1981 C&C 36' - Fresh Water Tank Replacement

I sealed mine with West System epoxy. You have to gently heat the tank with a propane torch just before applying. Mike Casey Halifax, NS C&C 30 On Tue, Jan 9, 2018 at 12:48 PM, Steve Thomas via CnC-List < cnc-list@cnc-list.com> wrote: > Same problem on my 36. Many leaking cracks. No reason to be

Re: Stus-List Small lead weight "sewn" into anchor rode?

Probably kellets? Used at that end to keep the line horizontal to the bottom for better holding? Mike Casey C&C 30, 1980 Halifax, NS On Sat, Jan 6, 2018 at 6:50 PM, Bruce Whitmore via CnC-List < cnc-list@cnc-list.com> wrote: > Hello all, > > On both of my old anchor rodes, there is a small (6 oz

Stus-List Solar panel - how to hook one up?

I have just taken the Power and Sail Squadron Marine Electronics course. If you can take it, I would urge you to do so. It has to be one of the best courses I have taken. I bought a solar panel for my C&C 30. I can attach it to the boat fine, but hooking it up so it can recharge the batteries is a

Re: Stus-List C&C Photo Album owners database - now advice on C&C 36

Thank you! Where are you located? On Tue, Dec 12, 2017 at 2:56 PM, Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > I too singlehand my 35 without a second thought. I can’t see a real > difference between a 30, 35, and 36 that wouldn’t be swamped by the > individual boat’s rigging.

Re: Stus-List C&C Photo Album owners database - now advice on C&C 36

Thank you very much. It's highly unlikely that I'll be sailing solo, as the Admiral is usually along. Your comments about how it is rigged up are spot on. Thanks! On Tue, Dec 12, 2017 at 2:29 PM, Dennis C. via CnC-List < cnc-list@cnc-list.com> wrote: > Excepting entering or leaving a slip, the ea

Re: Stus-List C&C Photo Album owners database

I am thinking of a 1978 C&C 36. Can anyone give me any intelligence on these boats? I currently have a C&C 30. I like how stiff it is. Would anyone know how the C&C 36 would compare? I'll be using it for coastal cruising in Nova Scotia. Would it be too much to handle for an old guy (65 years of

Re: Stus-List 30-1 Mast Step Support Rebuild Project Write-Up

What a fantastic story and great technical guide. The PO of my boat did this, but it was a bit of a mystery and I have never checked what he did. I will now. Your guide should be put in the technical part of the cncphotoalbum. Mike Casey C&C 30 1980 #636 Halifax, Nova Scotia Canada On Sun, Dec 10

Re: Stus-List C&C 40 for sale

You guys are bad, very bad. You may in fact get delisted from the site if your wives find out! Virus-free. www.avg.com

Re: Stus-List Split in keel.

Hi there, when I was looking at a boat in Maine I noticed this on a boat and the broker said it was because an anchor chain wrapped itself around it. As long as it isn't structural, the expxy advise seems the bst. Mike Casey C&C 30 MKI Halifax, NS On Tue, Nov 28, 2017 at 12:56 PM, Brien Sadler vi

Re: Stus-List Number of MKI C&C 30's made?

ch in the 300’s to 400’s. Stu had an early one, > don’t remember the number. > > Gary #593 > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com > ] *On Behalf Of *Mike Casey via CnC-List > *Sent:* Sunday, November 26, 2017 1:19 PM > *To:* cnc-list@cnc-list.com > *Cc

Stus-List Number of MKI C&C 30's made?

Does anyone know how many C&C 30 MKI's were made? I have #636...anyone have one after that? Mike Casey C&C 30 MKI ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support

Re: Stus-List Looking for a C&C 35 MKI

3548 > Email: s...@miramaryc.com > Contact me if you want more information not. Jerry > Sent from my iPhone > > On Nov 18, 2017, at 4:48 PM, Mike Casey via CnC-List < > cnc-list@cnc-list.com> wrote: > > Hi folks, it's pro

Re: Stus-List Fixing leaky portlights

I have used 4200 with very good success. On Tue, Nov 21, 2017 at 7:28 PM, Dave Godwin via CnC-List < cnc-list@cnc-list.com> wrote: > Hola Scott. > > I am getting ready to do the same thing on my boat for the second time. > It’s a 1982 vintage 37’ which has four ports as opposed to two like yours.

Re: Stus-List Sail Drives in general > Maintenance?

I would never have one. The more changes in direction you have in a mechanical device the more complicated it becomes. In one instance here the yard got a strap around it when taking the boat out of the water. I need not explain the result. Mike Casey C&C 30 1980 On Tue, Nov 21, 2017 at 10:41 AM,

Re: Stus-List Looking for a C&C 35 MKI

Thank you for putting such good ideas into my head! On Sun, Nov 19, 2017 at 5:07 PM, Russ & Melody via CnC-List < cnc-list@cnc-list.com> wrote: > > Okay Mike. > > This reminds me of when Rich had his Landfall for sale in Halifax and the > wife & I talked about having a boat on each coast. Common

Re: Stus-List Looking for a C&C 35 MKI

Regretfully I live in Nova Scotia. There seem to be a lot of very well upgraded C&C 35's out there. Thanks! On Sat, Nov 18, 2017 at 9:09 PM, Russ & Melody via CnC-List < cnc-list@cnc-list.com> wrote: > > Hi Mike, > > I have one for sale on the West Coast, Vancouver area. > > Good boat. > > Easy

Stus-List Looking for a C&C 35 MKI

Hi folks, it's probably the wrong time of year for this, but if anyone knows of a C&C 35 MKI for sale, would you please let me know? Thanks, Mike Casey ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatl

Re: Stus-List Bimini for C&C 30 MKI

Yes, sorry, Genco. Virus-free. www.avg.com <#DAB4FAD8-2DD7-40BB-A1B8-4E2

Stus-List Bimini for C&C 30 MKI

Hi folks, I see some threads on this. If you have one from enco, are you happy with the results? Thanks, Mike Casey C&C 30 1980 #636 Virus-free. www.avg.com

Stus-List My email

islandpacketrac...@gmail.com Virus-free. www.avg.com <#DAB4FAD8-2DD7-40B

Stus-List Post to the list

Hi folks, I bought a C&C 30 this past summer. I have been able to figure everything out except the full cockpit enclosure. It is Sunbrella and comes in a small bag. It attaches to the bimini, after the boom is clipped to the toe rail. I can see where it goes back and there are slots for the twin b

Re: Stus-List C&C30-1 climb to top of mast?

You use two halyards; you go up on the main; the jib is used as a spare. Don't use the clips; tie bowlines. On Sat, Jun 6, 2015 at 10:16 PM, Chuck Borge via CnC-List < cnc-list@cnc-list.com> wrote: > Jay, > I'm around 225 and just did it on my C&C34. And years ago was the go-to > guy on a J30. S