Fred,
Just wondered if I am correct that Raymarine Axiom 9, which I have with
Navionics+, still does not have a night mode similar to Garmin? When I
discovered that, I contacted their support guy (Charles, Chuck) and he
indicated they did not have a night mode. He started a ticket on that
re
No one seems to mention that on some C&C's the stanchions protrude
enough so that they will catch as you come in or out of a slip that has
pilings or boards on the finger pier. Unless someone is on the boat to
assist in keeping that from happening, one is likely to destroy a
stanchion. I have
Stu
I accidentally put my information, name, address, and phone number in a
message I intended to sent privately to Allen Hutton in Australia.
Could you remove that posting.
Thank you. Also if you send me your address via my private e-mail, I
would like to make a donation to the list via che
, 4 Jul 2018 at 17:42, Glenn Gambel via CnC-List
wrote:
I decided to clean my Barient 28 two speed self tailing winches today.
It was sunny and nice and I had been putting the project off for a
while. I did not think I would run into many problems, and that was a
mistake. I did, but won&#
inches.com/products/spares
They return emails quickly.
Ken H.
On Wed, 4 Jul 2018 at 17:42, Glenn Gambel via CnC-List
wrote:
I decided to clean my Barient 28 two speed self tailing winches today.
It was sunny and nice and I had been putting the project off for a
while. I did not think I
I decided to clean my Barient 28 two speed self tailing winches today.
It was sunny and nice and I had been putting the project off for a
while. I did not think I would run into many problems, and that was a
mistake. I did, but won't go into those now. Suffice to say, I did get
the winch
My Navtec hydraulic backstay tensioner blew a seal in the middle of the
Queen's Cup race from Milwaukee, WI. to Grand Haven, MI. I called
around and got some recommendations on a hydraulic manufacturer and
repair shop near Grand Rapids, MI. Took it in on Monday and hope to
have it back in les
I rebedded Wind N Spirits chainplates with 4000. Worked great and no
more leaking.
-- Original Message --
From: "Glen Eddie via CnC-List"
To: "cnc-list@cnc-list.com"
Cc: "Glen Eddie"
Sent: 4/10/2018 8:18:32 AM
Subject: Stus-List Sealant for chainplates.
Can someone with a 35 mkI or
My insurance is with Boat US, and my rates did not go up. Since I sail
on Lake Michigan and not in coastal areas or waters, I speculate that
location may have something to do with it. We don't have hurricanes
here. I also speculate that the hurricanes which have destroyed so many
boats are m
Mike,
I have a 1981 C&C 36 with Rod rigging. It has winches, etc. for racing.
I am 70, and would have very little problem sailing her by myself,
provided I rigged her up for that purpose. You must have roller
furling. You should have the jib halyard and main halyard lead aft so
that if n
Edd or Tom,
How did you decide it was the controller and not the compressor? Is
there a way to test to determine if the current controller is bad? My
controller is a 102N3030 12V DC with a 15 amp fuse. I believe the
digital control that you found on line will work in my boat, but I hate
to
I am contemplating replacing my 6 gallon Raritan hot water heater with
heat exchanger with an Atwood/Whale 6 gallon hot water heater with heat
exchanger. I could get a new Raritan for in the neighborhood of 800
dollars or a new Atwood for around 300 dollars. Wonder what other's
experience in
Fred,
Thanks for the help. It was very valuable and I am on my way to getting
applications completed.
-- Original Message --
From: "Frederick G Street via CnC-List"
To: cnc-list@cnc-list.com
Cc: "Frederick G Street"
Sent: 4/11/2017 10:09:50 AM
Subject: Re: Stus-List AIS and MMSI as w
If a boat crosses from the United States in to Canada and stops at a
Canadian port, must the vessel (sailboat) have a ships station license
from the FCC? I believe the answer is yes. Also, if the vessel has AIS
and MMSI, I believe that is necessary to have a ship station license and
have the
I have a 1981 C&C 36, and it is keel stepped, not deck stepped. Even if
your mast is keel stepped and you were some how going to raise it a bit
without completely removing it, I would suggest that the process would
be risky. Better to take it out and investigate the problem completely.
May b
I paid a professional to do mine last summer. Your price is not bad.
It is more difficult than it looks. I ended up with new heads as there
was a hairline crack in the head. He found it by xray, I believe. We
ran into difficulty finding a the new head and found it in Wisconsin.
Had I trie
I was wondering if anyone knew what brand, type, etc. single pole
marine circuit breakers would fit in the original panels that were
installed on a 1981 C&C 36? My original panels are in great shape, but
I have three or four circuit breakers that are no longer functioning and
must be replaced
I am a member of the c&c list and I am receiving copies of all e-mails.
Please don't sent them to me as I don't want them. It is clogging up my
e-mail etc
Glenn Gambel
Wind N Spirits c&c 36___
This List is provided by the C&C Photo Album
http://
18 matches
Mail list logo
