Re: Stus-List Reinstalling plexi windows...again.

I hope it doesn’t undermine the VHB. Here is where I got the idea... there is another thread somewhere about it too but can’t find it now “If the color of your plastic is not dark enough to hide the grey tape (and sealant), you may want to paint the inside perimeter of the pane. This will also pr

Re: Stus-List C&C 30 Mast weight

300 lbs sounds close. My rigger buddy and I pulled a mast off a deck stepped Hans Christian 38 few months ago. Crane had a scale. 466 lbs without furlers but with steps all the way up. Dennis C. Touche' 35-1 #83 Mandeville, LA On Tue, Mar 13, 2018 at 6:57 PM, Josh Muckley via CnC-List < cnc-li

Re: Stus-List C&C 30 Mast weight

Yeah Bruce, obviously the mast of a 37+ is considerably heavier. I was really just helping give and basis for an absolute maximum possible weigh. More of a, "It has to weight LESS than" A quick Amazon search proves difficult to find a chain fall less than 3/4 ton (1500 lbs). It is my belief

Re: Stus-List C&C 30 Mast weight

Never weighted my 1980 30-1 mast but I used to pull it annually with a gin pole and a helper - I would agree with the guesstimates based on swing momentum and two guys adjusting it on the fore and aft pulpits, etc, 200-300 lbs sounds right on. Nate Sarah Jean 1980 30-1 On Tue, Mar 13, 2018 at 12

Re: Stus-List Reinstalling plexi windows...again.

Here's a good overview of the process, although Keith used different adhesive. I think you have to be signed up to see pictures... http://forums.sailinganarchy.com/index.php?/topic/133986-how-i-fixed-my-f-ed-up-windows/ Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 13 March 2018 at 11:3

Re: Stus-List C&C 30 Mast weight

Is everyone considering the model of the boat here, as we're getting a wide swing in answers.  My C&C 27. MK III  had a deck stepped mast without a roller furler, and I could move it and get it on a rack with no assistance.  A keel stepped mast like on my 37/40+ would be an entirely differ

Re: Stus-List C&C 30 Mast weight

I don’t know what yours weighs but mine is 399 lbs. I know this for a fact because the mast crane at the yacht club has a maximum capacity of 400 lbs. LOL Mike PERSUASION C&C 37 K/CB Long Sault > On Mar 13, 2018, at 1:28 PM, gerald field via CnC-List > wrote: > > Does anyone have a idea of

Re: Stus-List C&C 30 Mast weight

The standing rigging weighs under 100 lbs, would guess the mast is 200 lbs. I normally disconnect the forestay, coil it and store it on board for the winter to protect the Harken Carbo Foil. I can pick up and carry the mast myself, no problem placing it on a rack up to shoulder height. To switc

Stus-List Cinkel Steering Maintenance Guide

Hello. I have downloaded a couple of gif images from the web for the Cinkel Steering Maintenance Guide. They are very low resolution scans and therefore almost illegible. Wondering if anyone has a higher resolution image they can share? Thanks. Bruce 29-2 Gyrfalcon Kootenay Lake, BC __

Re: Stus-List Some Saturday morning reading.

Should have gone through the de-naming ceremony!Even if one doesn't believe, never take the risk.RonWild CheriC&C 30-1STL On Sunday, March 11, 2018, 7:31:56 PM CDT, Ken Heaton via CnC-List wrote: Bad Karma?  Yes. I'll go with that. Ken H. __

Re: Stus-List C&C 30 Mast weight

The mast on my 37+ is about 60' long and with a person on each end, 2 men can barely lift it. I would guess that it is somewhere around 300 lbs. If you bought a chain hoist with a working load limit of 400 or 500 I would think you would be good to go. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solom

Re: Stus-List Reinstalling plexi windows...again.

PO of Hideaway 35-3 had stainless steel frames made for the windows when they were replaced. They look sharp, cover the seam well. He said they weren’t cheap. I imagine they were glued on. Jon Pratt >> On Mar 13, 2018, at 9:00 AM, Chuck Saur via CnC-List >> wrote: >> >> Happy spring?? I re

Re: Stus-List Reinstalling plexi windows...again.

I used the dark bronze plexiglass and you can't see the join. Al Liles SV Elendil Vancouver > On Mar 13, 2018, at 9:45 AM, M Bodnar via CnC-List > wrote: > > > Ditto. The Kylon Fusion flat black worked well for me. > - >> On 2018-03-13 11:19 AM, Frederick G Street via CnC-List wrote: >

Re: Stus-List C&C 30 Mast weight

Hi Gerald, I don’t have an exact weight for the mast on my 30 MK I, but I would guesstimate it’s in the range of 200-250 pounds. Two guys can lift it but it’s a struggle, and they can’t hold it for long or move it very much. Four or five guys can carry it more easily. Cheers, Randy Stafford

Re: Stus-List Reinstalling plexi windows...again.

Won’t that undermine the bond with the 3M tape? From: Jeremy Ralph via CnC-List Sent: Tuesday, March 13, 2018 12:36 PM To: cnc-list@cnc-list.com Cc: Jeremy Ralph Subject: Stus-List Reinstalling plexi windows...again. My plan is to paint the acrylic underside with VHT Silicone header spray pain

Re: Stus-List C&C 30 Mast weight

I have a 1 1/2 ton chin hoist that easily lifts my C&C 30 mast. I had two other people help me move the mast so I would approximate the mast to be maybe 300 lbs. Tom Power Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of

Stus-List C&C 30 Mast weight

Does anyone have a idea of the approximate weight of the mast on a C&C 30. I am going to buy a chain hoist that i will mount on a frame for moving my mast from its winter stands onto a mast dolly at the club and i want to make sure i get a appropriately sized one.Gerald FieldC&C 30 VagabondMidla

Re: Stus-List Reinstalling plexi windows...again.

Ditto.  The Kylon Fusion flat black worked well for me.  - On 2018-03-13 11:19 AM, Frederick G Street via CnC-List wrote: Chuck — I used the Krylon Fusion flat black spray paint around the edges of my windows, and it worked wel

Stus-List Reinstalling plexi windows...again.

My plan is to paint the acrylic underside with VHT Silicone header spray paint. Saw this recommended on a forum somewhere . Anyone try this? Good or bad idea? From: Chuck Saur > To: cnc-list@cnc-list.com > Cc: > Bcc: > Date: Tue, 13 Mar 2018 10:00:35 -0400 > Subject: Stus-List Reinstalling pl

Re: Stus-List Reinstalling plexi windows...again.

Chuck — I used the Krylon Fusion flat black spray paint around the edges of my windows, and it worked well. — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( > On Mar 13, 2018, at 9:00 AM, Chuck Saur via CnC-List > wrote: > > Happy spri

Stus-List Reinstalling plexi windows...again.

Happy spring?? I recall someone commented on priming and/or painting the smoke-tint plexiglass edge areas, prior to installing, to hide the the VHB and Dow 795, so all does not show through the smoke plexi against the white cabin side along those edge areas. I have the window dug out, whew, and