4 knots in 30 days is 2880 nmiles. Could reach civilization from most places
in the Pacific
Reliance on electronics only will leave you in deep
Leslie
On Fri, 10/27/17, David Knecht via CnC-List wrote:
Subject: Re: Stus-List News story
T
My 35-3 is for sale. Here is a link to the ad:
https://www.popyachts.com/cruising-sailboats-for-sale/c-c-yachts-35-mk-iii-in-perth-amboy-new-jersey-135392
___
The bills have started coming in for the year 2018 and have gone up again.
October will b
Joe:
I have an AIT2000 and Raymarine C80 MFD. The AIS out goes to the C80 NMEA
0183 in and the AIS in goes to the C80 out. Since I have a separate GPS,
that connects to my VHF for the DSC connection. I use a separate VHF
antenna for the AIS, and it can be used as a VHF antenna in case I ever
los
Good idea.
I called Digital Yacht and they told me that the AIS units do NOT listen for
standard DSC transmissions. The only reason they listen on CH 70 is that
sometimes the USCG or other national authority can send messages specifically
to AIS units on 70 to change channels or otherwise do som
Joe — you should be able to identify what the DY AIS is doing by looking at the
serial output via HyperTerminal on your laptop (assuming you have a way to get
serial in, like an RS232 to USB adapter).
— Fred
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfiel
For those not familiar with SH plotters:
SH got away from actual GPS antennas, the kind with coax and a TNC connector,
and got onto “smart antennas”. This is a GPS unit that is self-contained in the
mushroom case and sends NMEA data down the wire. These are nice because you can
splice the cable
The old AIS was tested on my Sunday afternoon sail and got about 15 targets. It
is now off the boat to be shipped to its new owner. The new one is on the way,
a Digital Yacht AIT1500. So now I need to redo the various NMEA connections and
the first thing I am trying to figure is the DSC-in signa
I believe you can also check the resistance with a multimeter.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Oct 29, 2017 6:10 PM, "Michael Cotton via CnC-List" <
cnc-list@cnc-list.com> wrote:
> Before you go do all that work and expense test the glow plugs. Use a
> digital laser ther
This was the email Stu sent for email transfers
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stu via
CnC-List
Sent: Thursday, October 26, 2017 11:20 AM
To: cnc-list@cnc-list.com
Cc: Stu
Subject: Stus-List Support Contributions
If anyone wishes to
