Best
Best part way to clean thru-hulls is soaking in muriatic acid. It is hazardous
so care must be taken in handling the product. Wear gloves and use in a well
ventilated area. Depending on the condition it may take a few changes of acid
but it will clean everything completely. Rinse well with
Soak in cleaning vinegar. It's double the strength (10%) of food-grade.
The surface will turn pink, which might freak you out, but I understand
it's just a surface deposition of copper and cleans up with a scotch-brite
pad or steel wool.
___
This li
I replaced my 'punky' wood fairing block with one cast out of epoxy. Used a
plastic tub (cottage cheese or something similar) as the form (giving a
rounded edge to it from the profile of the bottom of the tub) and a short
section of cardboard tube that was the same diameter as the depth
transducer.
Home
Work tomorrow
Planned to leave for Shelter Island on Wed.
90%Chance of rain all day Wed.
Now plan on leaving for Shelter Island on Thursday.
Arrive Greenport on Thursday or Friday.
If the rain forecast changes we may still leave Wed afternoon.
C&Cnortheast.com Here we come
S/V Hanuman
Here is an oddball idea that I thought I'd float by the list:
Reverse wiring the standard 1-2-All-Off switch to accomplish the following
(context: I have an electric motor, so don't charge my batteries off the engine)
Wire the 2 -27 house batteries in parallel, then feed the output to the
stand
I once enquired about a slip there (One 15) and almost fell over when they told
me the price. Is a nice view though. I'm in Three Mile Harbor about an
hour's sail from Greenport but must confess I'm now on a Hunter 37.5. May stop
by to say hello as long as I am not torpedoed. Jerry
Sent f
I use P79 transducer for the last 4 years and it works fine. It takes a while
to adjust the angle to make sure that you shoot straight down. You have to put
some liquid into the housing, normally antifreeze, but over time it
evaporates/leaks, so you need to refill every 4-6 months. Other than th
Tomorrow is Norwalk Cove. Tonight is One15 marina in Brooklyn looking at
skyline of NYC. Unfortunately I'm drinking all the rum allocated for the
rendezvous.
Sent from my iPhone
> On Sep 4, 2017, at 5:10 PM, Danny Haughey via CnC-List
> wrote:
>
> Are you going to visit sunset grill?
>
>
Not being facetious; soak em in Coca Cola. Just cleaned up some very tarnished
bronze that way. You might have to take a wire brush to them as well.
Andy
C&C 40
Peregrine
Andrew Burton
61 W Narragansett
Newport, RI
USA02840
http://sites.google.com/site/andrewburtonyachtservices/
+401 965-52
I would post it on craigslist and other places as "Make an offer, must be
gone by xxx date".
Do you have a date in mind? Sounds like you're in a rush. Getting that boat
off the property will cost someone money, it's difficult to sell a boat in
that condition, in a hurry, anyway. If you're giving i
Does anyone have a cleaner for the bronze thru hulls? They seem to be rather
corroded.___
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stu
Now we're in Cocktail Cove, Jewel island in Casco Bay, coincidentally enough,
enjoying a nice Mt Gay and tonic.
Saw Peter's aft cabin 40, Goonie Island in Portland, but couldn't hook up with
Peter.
Andy
C&C 40
Peregrine
Andrew Burton
61 W Narragansett
Newport, RI
USA02840
http://sites.goo
Oh yes. Reservation for 7:30.
All the best,
Edd
---
Edd M. Schillay
Starship Enterprise
C&C 37+ | NCC-1701-B
City Island, NY
www.StarshipSailing.com
---
Sent from my iPad Air
iPad. iTypos. iApologize
> On Sep 4, 2017, at 5:10 PM, Danny
Are you going to visit sunset grill?
Sent from my T-Mobile 4G LTE Device
Original message From: Edd Schillay via CnC-List
Date: 9/4/17 4:37 PM (GMT-05:00) To:
cnc-list@cnc-list.com Cc: Edd Schillay Subject: Re:
Stus-List Whereabouts???
Norwalk Cove Marina. Slip A10E.
D
Tony,
>From my Yanmar Service Manual, Marine Diesel Engine, Model 3QM30(H), Chapter 1
>General, 2. Specifications:
Reduction gear system
Reduction ratio:
Model: 3QM303QM30H3QM30Y3QM30F
ModelYP-10MKH-18YP-10MKH-18
Reduction Rat
Congratulations on your new boat. I use that locker for sail ties, and for
a spinnaker halyard winch handle.
Alan Bergen
35 Mk III Thirsty
Rose City YC
'Portland, OR
On Mon, Sep 4, 2017 at 2:04 PM, schiller via CnC-List wrote:
> We moved the new (to us) 1983 C&C 35, Mark III from Muskegon, Mic
We moved the new (to us) 1983 C&C 35, Mark III from Muskegon, Michigan
to Whitehall, Michigan Saturday. Nice day for the move, started out
sunny and mild with fairly light winds out of the West with a fairly
light chop. We sailed on a close reach up the lake. The winds picked
up a little and
Norwalk Cove Marina. Slip A10E.
Day One of our (Star) Trek to the C&C Rendezvous in Greenport.
All the best,
Edd
---
Edd M. Schillay
Captain of the Starship Enterprise
C&C 37+
Sail Number: NCC-1701-B
City Island, New York
---
9
Neil,
Congratulations. You’ll love the Mk-III. There are a lot of Mk-III owners
(and former owners) on this list. We can help with a lot of model-specific
tasks/problems.
Jake
Jake Brodersen
C&C 35 Mk-III “Midnight Mistress”
Hampton VA
On Fri, Sep 1, 2017 at 9:22 P
For shooting through the hull, Airmar makes a P 79 transducer for Raymarine and
Garmin depth sounders that includes the housing.
What makes this attractive is that it is designed to handle any slant in the
hull up to 22 degrees.
It is reasonably priced, as boat gear goes, and it has worked we
When I put a gps on my Catalina and o day I simply put transducer lorance fish
finder in toilet plug wax making sure no air bubbles and I got good depth
readings
Peter
Goonie island C&c 40
Sent from my iPhone
> On Sep 4, 2017, at 1:27 PM, Steve Thomas via CnC-List
> wrote:
>
> So, your ty
Dennis,
I should add that it matters if the LED bulb distributes the light
differently. If the lumens are the same, but the light distribution is
different, then I would think the bulbs would not be equivalent.
Gary
~~~_/)~~
On Mon, Sep 4, 2017 at 2:35 PM, Gary Russell wrote:
>
Dennis,
there is no accurate way to convert power (V*I) to lumens. Basically the
temperature of the filament will drive the lumens value.
Leslie.
On Mon, 9/4/17, Dennis C. via CnC-List wrote:
Subject: Stus-List LED bulb lumen equivalents
To: "Cn
Dennis,
Watts is watts. A 3.4 watt bulb at 12 volts (0.28 amps) will draw 10x
the current as at 120 volts (.028 amps). but the lumens should be about
the same, I think.
Gary
S/V Kaylarah
'90 C&C 37+
East Greenwich, RI, USA
~~~_/)~~
On Mon, Sep 4, 2017 at 12:19 PM, Dennis C. via C
Mark;
When I replaced the non-functioning Signet sounder on my 25MK1 with a Garmin
plotter/sounder about 20 years ago, I got some good advice from the iteration
of the C&C list that was extant at that time. I left the old transducer in
place and just cut off the wires. Then I made a “wet box
So, your type 1891 incandescent lamp is rated at 2 spherical candle power,
which is equivalent to 25 lumens.
Steve Thomas via CnC-List wrote:
This link to a GE miniature lamp catalog contains a wealth of information.
Brightness is expressed in "spherical candlepower", where one candela i
Green Cove Springs, Florida
Paul Marble
S/V Tina Marie
On Sep 4, 2017 12:48 PM, "Steve Thomas via CnC-List"
wrote:
> Port Stanley, Ontario
> Steve Thomas
> sv Mystique
> C&C27 MKIII
>
> "Ronald B. Frerker via CnC-List" wrote:
> Just wondering about where our wandering list members are cur
This link to a GE miniature lamp catalog contains a wealth of information.
Brightness is expressed in "spherical candlepower", where one candela is
approximately equal to 12.5 lumens. Don't get distracted by sites with purist
definitions, this is close enough for farm use in this context.
http
Port Stanley, Ontario
Steve Thomas
sv Mystique
C&C27 MKIII
"Ronald B. Frerker via CnC-List" wrote:
Just wondering about where our wandering list members are currently?Where are
you Hank an where is Stella Blue?RonWild CheriC&C 30-1STL (still)
From: henry evans via CnC-List
To: Jo
I replaced the bulb in Touche's binnacle compass this weekend. Really
wanted to look at an LED bulb but got hung up on the brightness. I just
replaced it in kind from an auto parts store.
The original bulb was a trade number 1891, 3.4W, 12 VDC mini-bayonet (BA9S)
base. It's not difficult to fin
According to my records...my transmission is 1-1 and the vdrive is 2-1.
___
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/st
On my '77 30 MK1 the rudder post goes through a fiberglass tube that is a close
fit,
would not allow much sideways movement. Wear between the shaft and tiller is
more likely.
If the bolts are easy to remove and are not retaining the shaft then take them
out and see
how easily the tiller comes of
Hi Charles,
Congrats on the acquisition of a C&C 30 MK I. I own hull #7, built in 1972. My
boat also has tiller steering and boom-end sheeting, making for a nice roomy
cockpit. I’ve dealt with play in the tiller as well. In my case it was easy
to correct by simply tightening the nuts on the
Congrats on the purchase, Neil! My 35-3 is in UP...but I live a fairly
itinerant lifestyle between Hessel and Grand Rapids. Not sure where you
are, but send me a note offline if you want to chat/swap. I have stuff and
stories. cs
*Chuck Saur*
C&C 35-3
Morning Sky
___
Looking for some guidance on a problem with my newly acquired 73 C&C30 . I Have
play in the tiller and I'm trying to determine if the play is the result of
"egging" around the through bolt or the piece that I think is called the rudder
head. The rudder head is attached to the rudder shaft by 2 b
I believe my transmission is 2.14:1. Not 100% sure, but when I had it
rebuilt two years ago I had someone check it and that's what they said it
was. Also I had considered replacement and they had 2.7:1's in stock but no
2.14:1.
Just curious where are you getting your new transmission? I had the
i
36 matches
Mail list logo
