Different pitch or diameter? Or both? On the defender website there were
2 of the same diameter but with differing thread pitch. My marina had an
assortment of fittings (I think 3 IIRC) but none of them seemed to be a
close enough match.
Josh
___
Ema
the fittings the marina leaves out are pipe threaded, 1-1/4 and 1-1/2 inch pipe
thread with a 2 inch cam lock on the other end. neither of them fit our C&C the
thread size must be metric, if there is such a thing. Will work it out at the
boat show.
Thanks
Brad
C&C 33 MkII "Pulse"
Sent, miraculo
Sorry Dennis, your right. The threaded fittings are all different
(diameter and pitch). It just sounded like he (Bradley) had acquiesced to
not using a universal fitting due to the quoted cost of $200. $50 and
universal is a hugh win. I also fear accidentally breaking off the threads
of the oth
Thanks for the replies, our marina uses the threaded fittings regularly, I'm
going to have to order one so I don't get caught with a full tank. got all
winter to shop, may check out the Toronto Boat circus in January.
Brad
1985 C&C 33 MkII "Pulse"
Sent, miraculously through cyberspace,
from my
Josh,
I'm aware of that. Used the universal rubber adapter many times. Brad
asked what size the threaded fitting was. I was assuming he wanted the
thread size.
Dennis C.
On Tue, Oct 20, 2015 at 9:04 PM, Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:
> Dennis,
>
> There is just one
Dennis,
There is just one size if you go with the rubber cone style. It's a
universal pump out. The only variable is the fitting style (MIP,
Cam-lock, etc.) on the pump out hose. Usually cam-lock is used to
facilitate easy change out and replacement.
I have a string that retains the cap and t
There's not just one size.
http://www.defender.com/product.jsp?path=-1|7504|2290180|2290181&id=1987783
Dennis C.
On Tue, Oct 20, 2015 at 8:02 PM, Bradley Lumgair via CnC-List <
cnc-list@cnc-list.com> wrote:
> Does anyone have any idea what size the pump-out threaded fitting is? Our
> boat is a
Gary:
Could be the windows earlier replaced were 1/4" and should have been
3/8'..that might explain the 1/8" indentation.
I replaced my 4 side cabin windows, 3/8" acrylic flush to the cabin
sides, about 7 years agoI can take you through my process of doing
it if you wish.I won't
$50
http://www.edsonmarine.com/marinestore/index.php?main_page=index&cPath=65
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Oct 20, 2015 9:03 PM, "Bradley Lumgair via CnC-List" <
cnc-list@cnc-list.com> wrote:
> Does anyone have any idea what size the pump-out threaded fitting is? Our
>
Jake,
There is a slight indentation where they sit, but they are by no means
flush. The angled indentation might be 1/8" deep.
Gary
S/V High Maintenance
'90 C&C 37 Plus
East Greenwich, RI, USA
~~~_/)~~
On Tue, Oct 20, 2015 at 9:38 PM, Jake Brodersen via CnC-List <
cnc-list@cnc-lis
Gary,
Mine are 3/8” thick and are flush with the sides of the cabin.¼” sounds a
bit skinny, especially for offshore work. Are yours recessed into the cabin?
Jake
Jake Brodersen
C&C 35 Mk-III “Midnight Mistress”
Hampton VA
From: CnC-List [mailto:cnc-list-boun...@cnc-lis
Brad,
I've never seen or used a threaded adapter. The standard fitting for a pump
out is the rubber cone or nozzle. As long as you can make a good seal, it
works great. This sometimes requires some pressure to be maintained on the
connection.
Jake
Jake Brodersen
C&C 35 Mk-III "Midnight Mistre
I am starting the process of replacing the side windows on High Maintenance
(1990 C&C 37 Plus). The windows have been replaced before (not original)
and are currently 1/4" acrylic. Is that the right thickness? I've seen in
some places references to 3/8" windows. So were the original windows 1/4
Does anyone have any idea what size the pump-out threaded fitting is? Our boat
is a 1985 33 MkII. Marina doesn't have a threaded adapter, they do have a blue
neoprene cone shaped adapter that they carefully lock up when the gas dock is
closed, the standard adapters are always out. They tell me i
Not mine but if anyone is interested:
http://www.usedvictoria.com/classified-ad/Raymarine-Smartpilot-X-5-Tiller-Pillot---Brand-New-in-Box_26161742___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to t
15 matches
Mail list logo
