Re: Stus-List ...Now lighting configurations...

I suck 46%.  Doug MountjoysvPegasusLF38 just west of Ballard, WA. -- Original message--From: Danny Haughey via CnC-ListDate: Mon, Aug 24, 2015 13:39To: cnc-list@cnc-list.com;Cc: Danny Haughey;Subject:Re: Stus-List ...Now lighting configurations... 66%... --

Re: Stus-List C&C 26 Sail Plan Thoughts!

I usually run a 110-115, you give up a little in the mid-range winds, but in light or heavier air I think it's better than running 130+ genoa, plus it's way easier to handle when under-crewed. Have done the same on a 24 and a 27, neither are particularly tender but the same principle applies. C

Re: Stus-List C&C 26 Sail Plan Thoughts!

I will preface this by saying I consider myself a beginner hack sailor. I have often thought about trading my 135 for a 110. The 26 is tender for sure and I get plenty of grief from my bride whenever we go past 20 degrees. I often furl or reef the main when she is on board, and although per

Stus-List C&C 26 Sail Plan Thoughts!

I know there’s a few 26 owners on here so thought I’d share my thoughts on optimizing my sail plan. Jump in anyone, I’m open to any thoughts! Was out sailing today, only boat on the lake – I love that! So I thought we’d play around with the sail plan. Wind was 8kn -12kn. (Estimate – I usually th

Re: Stus-List ...Now lighting configurations...

I saw a quick flash yellow on a sub up in Norfolk in early 2004 when I bought Imzadi. My boat had been berthed behind Willoughby Spit at the marina on the Norfolk Navy Base. I wonder if having a distinct light pattern at all wasn’t the source of a lot of discussion in the government. After

Re: Stus-List ...Now lighting configurations...

Or you could open a seacock and be a submarine… :^) I saw a quick-flashing yellow only once, while in Lahaina, Maui returning from a night-dive; there was a U.S. Navy sub coming in for shore leave. Pretty distinctive light pattern. Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38

Re: Stus-List ...Now lighting configurations...

I keep a very quick flashing (90/minute) amber strobe left over from my days in the forklift industry on the boat that plugs into a cigarette lighter receptacle. So far the only times it has been used are once to mark the boat in a crowded anchorage when I would be coming back to it late at night,

Re: Stus-List ...Now lighting configurations...

I only managed 83%. The light patterns for shooting and hauling nets were lost in ancient memory, but I swear I did know them when I took the test for my Masters license. Did however like the submarine, minesweeper, and semi submerged tanks. Those were pretty much gifts. Rick Brass Washingt

Re: Stus-List knotmeter malfunction

Joe, What kind brand of knot meter? Gary S/V Expresso ~~~_/)~~ On Mon, Aug 24, 2015 at 5:00 PM, Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > Coquina just got hauled this morning. Now I can go over and see why my > knotmeter reads 0 underway, but if I pull the imp

Re: Stus-List ...Now lighting configurations...

Yes. Strobe, tricolor and anchor along with steaming, deck, spreader and deck level running. The boat also came with an anchor ball, motoring cone, radar reflector, man overboard strobe, Loran C and an EPIRB (1970 version). Neil Schiller 1970 Redwing 35, Hull #7 (C&C 35, Mark I) "Corsair" O

Re: Stus-List knotmeter malfunction

Maybe a silly question; but was it installed in the correct orientation (pointing forward)? Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI > On Aug 24, 2015, at 4:00 PM, Della Barba, Joe via CnC-List > mailto:cnc-list@cnc-list.com>> wrote: > > Any ideas why the p

Re: Stus-List knotmeter malfunction

Joe, It does not take much growth for my paddlewheel to stop spinning. If your is fuzzy it might be that simple. Many divers won't clean a boat with ablative paint. Maybe time to switch while there is no build-up. I've had good luck with Trinidad SR, but the price is through the roof. Joel 35

Stus-List knotmeter malfunction

Coquina just got hauled this morning. Now I can go over and see why my knotmeter reads 0 underway, but if I pull the impellor out and spin it the readings are good. Any ideas why the paddlewheel spins freely in my hand but not in the water??? BTW – the diver that cleaned my bottom said now I had

Re: Stus-List TEST 12

Okay, already — it’s working! :^) Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI > On Aug 24, 2015, at 3:50 PM, Della Barba, Joe via CnC-List > wrote: > > TEST 1 > > From: Della Barba, Joe > Sent: Monday, August 24, 2015 3:30 PM > To: 'cnc-list@cnc-list.com

Re: Stus-List TEST 12

TEST 1 From: Della Barba, Joe Sent: Monday, August 24, 2015 3:30 PM To: 'cnc-list@cnc-list.com' Subject: TEST Joe From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tony Wroblewski via CnC-List ___ Email address: CnC-List@cnc-list.com

Re: Stus-List TEST

Neil On 8/24/2015 3:29 PM, Della Barba, Joe via CnC-List wrote: Joe *From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Tony Wroblewski via CnC-List ___ Email address: CnC-List@cnc-list.com To change your list preferences, inc

Re: Stus-List ...Now lighting configurations...

66%... -- Original Message -- From: "Dennis C. via CnC-List" To: CnClist Cc: "Dennis C." Subject: Re: Stus-List ...Now lighting configurations... Date: Mon, 24 Aug 2015 15:15:37 -0500 Anybody make 100% on this? Dennis C.Touche' 35-1

Re: Stus-List ...Now lighting configurations...

Anybody make 100% on this? Dennis C. Touche' 35-1 #83 Mandeville, LA ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc

Re: Stus-List ...Now lighting configurations...

Strobes are illegal technically even in emergencies. See the COLREGS (Rules 20, 21, & 36 - Rule 36 Signals to Attract Attention If necessary to attract the attention of another vessel, any vessel may make light or sound signals that cannot be mistaken for any signal authorized elsewhere in thes

Re: Stus-List ...Now lighting configurations...

My mast head light has a strobe, but it hasn't worked since I put in LEDs. My understanding is that it is only for emergency use only.  Doug MountjoysvPegasusLF38 just west of Ballard, WA. -- Original message--From: Knowles Rich via CnC-ListDate: Mon, Aug 24, 2015 11

Re: Stus-List ...Now lighting configurations...

My original masthead light WAS a strobe. No solid, no nothing. Screwed up my VHF reception. Not sure why those were ever used . . . Bill Coleman C&C 39 Erie PA. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Donnelly via CnC-List Sent: Monday, August 24, 2015

Re: Stus-List TEST

You passed the test Joe, Ray in New Jersey. On Mon, Aug 24, 2015 at 03:29 PM, Della Barba, Joe via CnC-List wrote: Joe   From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tony Wroblewski via CnC-List ___ Email ad

Re: Stus-List TEST

RCVD / ACK :^) — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI > On Aug 24, 2015, at 2:29 PM, Della Barba, Joe via CnC-List > wrote: > > Joe ___ Email address: CnC-List@cnc-list.com To change your list prefere

Re: Stus-List ...Now lighting configurations...

My anchor light I installed last year has a strobe setting. You control it with on / off sequence of the switch.. David DonnellyC&C 26 Mistress Sent from my Samsung device Original message From: Knowles Rich via CnC-List Date: 08-24-2015 12:41 PM (GMT-07:00) To: cnc

Stus-List TEST

Joe From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tony Wroblewski via CnC-List ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/

Re: Stus-List ...Now lighting configurations...

Anyone got a strobe at the masthead? Rich Knowles Nanaimo, BC Boatless! On Aug 24, 2015, at 11:33, David via CnC-List wrote: Got it...we are blessed with an elevated level of power and sail expertise up here in Buzzards Bay. But like you said. When I head West into LIS. Whoa. Al

Re: Stus-List ...Now lighting configurations...

Got it...we are blessed with an elevated level of power and sail expertise up here in Buzzards Bay. But like you said. When I head West into LIS. Whoa. All light configuration bets are off and there is traffic of all sorts... David F. Risch (401) 419-4650 (cell) To: cnc-list@cnc-list

Re: Stus-List ...Now lighting configurations...

There was a boat at Brown's dock in Bimini last year with a mast top light that was constantly changing colour, like some kind of Christmas decoration. I don't know if he used it under way or not, and I chose not to raise the subject, but it sure looked weird. Steve Thomas C&C27 MKIII Port Sta

Re: Stus-List ...Now lighting configurations...

Agreed, but for our night races there are never more than a few other boats not racing, which would be weekend warriors that I am sure don’t even know anything beyond red and green anyways. Very little commercial traffic, not like LIS. But you are correct, it is not kosher. I don’t think anyone

Stus-List ...Now lighting configurations...

I beg to differ. Anchor light being used to light a windex is confusing and against the regs. Windex makes a light for that purpose. A tricolor (with no deck lights) also lights the windex within the lighting regs. What about boats not in your fleet? Lights have meaning. Forgive my push ba

Stus-List 18 Days to the 2015 C&C Northeast Rendezvous! -- Sept 11-13, 2015 -- Clinton, CT (Central LI Sound)

Listers, We’re now just 18 days away (with 10 days left to register) to the C&C 2015 Northeast Rendezvous — See cnc2015.com . Floating private dock Power / Water Pool / Hot Tub Recreation Area Ship’s Store / Mechanics on Site Shopping Shuttle to Premium Outlet Mall Close to

Re: Stus-List Was Wire Gauge, now Where can I get LED?

We also use them on Night races to light the Windex. As long as you know everyone in the fleet is using them for that purpose it is not confusing. I don’t know what other boats think, but there are usually not too many of them. Bill Coleman C&C 39 Erie, PA From: CnC-List [mailto:cnc-li

Re: Stus-List 37+ Navteq hydraulic backstay hoses

I’ve found that many Truck Repair centers have the capability to repair hydraulic lines and hydraulic cylinders. I believe I once used a place in Waldorf MD to do some work for me. It’s close to Solomon’s Island MD. You might check it out ! Don Wagner C&C 41 CB Der Baron From: Alan Bergen via C

Re: Stus-List Was Wire Gauge, now Where can I get LED?

some people use the anchor light to light the windex. You can buy a light that sits on top of the mast and shines up for that purpose. I'm waiting for the solar powered version! I find it hard to judge distance from boats use a masthead light. Maybe that's just me. Joel On Mon, Aug 24, 2015 a

Re: Stus-List Was Wire Gauge, now Where can I get LED?

Yup, I have seen all color combination to and for Bermuda as well... Anchor lights with Tricolor... Tricolor with deck level nav lights... Steaming light with tri-color... Nav lights with no steaming light (when under power) Wrong. wrong Wrong. Very confusing when two fleets encounter each ano