Hey Josh
When we brought our Alera out from lake Ontario, as part of the fresh
to salt water conversion and re commissioning we got a new anchor and
had the yard install a windlass. I had to replace all of the major
heavy gauge 12V wiire and it seems like a good time to get it done.
We went
Hi Tim
I bolted a Garhauer roller on the front, over the casting. Two bolts go
into the casting where I drilled and tapped holes, and two further aft
go thru the deck to a big backing plate. It is supported on a Starboard
wedge. Looks OK, and a lot cheaper than getting a custom fit.
Graham
Hi Mike
Turf it, not the same. The older systems only transmitted on the lower
frequency (121.5), not on the 406 used today. And it won't have a GPS,
so the location accuracy is a lot more vague since they have to use
satellite triangulation to figure out where you are.
Plus it is 30 years
I saw this boat through RBRogers Brokerage (whom I bought my current boat
through a few years back). It is a very nice boat. Shoal draft. Some damage
to the toe rail bent in about a one foot section on portside stern. Hull
paint has some scratches. Interior is very nice. Didn't see t
He mentions 26ft as a cutoff in his narrative, but it's 12m in the literature.
I'm presuming the 12m is correct for the single all around white light for
motoring.
Ron
Wild Cheri
On Thu, 11/6/14, Edd Schillay via CnC-List wrote:
Subject: Re: Stus-
Hmmm
That reminds me. Last month I came across an unused EPIRB that my Dad bought
in the early 80s. Is the technology still the sme and would it be worthwhile
replacing the batter?
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson
via CnC-List
Sent: Friday, Nove
All,
I need to buy a new EPIRB - the current one is too old for a battery
replacement. (I'll keep it as a spare as long as it tests OK.)
I am looking at a Type II with GPS. ACR has 2 models. One has "idiot
lights"; the other has a digital display. The digital display is $180.
more. The more
Now this brings back memories.
We made the decision to sell our 60' cutter, Melody Dawn, after
owning & finishing her for 18 years. When it was obvious the mill
wasn't going to shutdown and have us go to charter & freight in the
South Pacific. It was truly a sad day that we moved her out of t
It *seems* to run 24/7, but I'm not on the boat at that time in winter, and
we turn it off when we're on the boat for the night because even that
little hum can get annoying. With a Caframo Stor-Dri and 3 Dri-Z-Air water
collectors I'm not too worried about condensation. However, I am looking at
in
Wow! A little big for Carlyle lake. But it sure looks like a jewel.
Ron
Wild Cheri
C&C 30-1
STL
On Fri, 11/7/14, Tim Goodyear via CnC-List wrote:
Subject: Stus-List 38-3 for sale in CT
To: "cnc-list@cnc-list.com"
Date: Friday, November 7, 2014,
I mounted a shelf in the anchor locker because I thought the back of the
locker was too flimsy on my boat to take the strain and there was a gap
between it and the plywood bulkhead.
I glassed some knees to the hull right where the balsa tapers and bolted
the shelf to the knees. The shape of the hul
Roman numerals. This was their equivalent of new math.
Ron
Wild Cheri
On Fri, 11/7/14, Steve Thomas via CnC-List wrote:
Subject: Re: Stus-List Dvivxdit
To: "Richard Bush" , cnc-list@cnc-list.com
Date: Friday, November 7, 2014, 12:16 PM
Differen
As to the anchor roller, mine is pretty basic. A stainless weldment bolted
to the cast aluminum cap.
https://lh5.googleusercontent.com/-UGg78HDTDU8/VF0Ni1ly3ZI/ClI/eyOHjLZTy7s/w1200-h822-no/anchor%2Band%2Broller.jpg
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
On 7 November 2014
Danny
In November 2007 I drove to our marina to show interested people our boat at
the time (Niagara 26 Full Tilt 2). They agreed to buy it on the spot. The
drive home was quite sad.
By the time I arrived home 90 minutes later I was already scheming about the
next boat which we bought ten da
Differential calculus?
- Original Message -
From: "Richard Bush via CnC-List"
To:
Sent: Friday, November 07, 2014 1:11 PM
Subject: Stus-List Dvivxdit
___
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Yea, that saying about a boat owners happiest days didn't ring true for me. I
walked away a little heartbroken...
From my Android phone
Original message
From: Joel Aronson via CnC-List
Date: 11/07/2014 11:57 AM (GMT-05:00)
To: Stevan Plavsa ,cnc-list@cnc-list.com
Subjec
I am...there is a boat I've been obsessing over!
From my Android phone
Original message
From: Stevan Plavsa
Date: 11/07/2014 11:37 AM (GMT-05:00)
To: Danny Haughey ,cnc-list@cnc-list.com
Subject: Re: Stus-List Anyone in Toronto near outer harbor marina?
What kind of re
I haven't seen the boat directly, but this boat has a reputation of being
well looked after and very well sailed (no affiliation). I only post it
because it appears well maintained and very well equipped. Hmmm, might be
a nice swap for Mojito...
http://www.yachtworld.com/boats/1986/C%26C-38-Mark
Danny,
Congrats on being boatless! Someone got a great boat! I hope they are
signing up on the list!
Joel
On Fri, Nov 7, 2014 at 11:37 AM, Stevan Plavsa via CnC-List <
cnc-list@cnc-list.com> wrote:
> What kind of recon? Are you considering buying a boat that's located there?
>
> Steve
> Suhan
What kind of recon? Are you considering buying a boat that's located there?
Steve
Suhana, C&C 32
Toronto
On Fri, Nov 7, 2014 at 11:17 AM, Danny Haughey via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hi Guys,
>
> Looking for someone to do some recon in Toronto Outer Harbor Marina.
> Is there any
Hi Guys, Looking for someone to do some recon in Toronto Outer Harbor Marina.Is
there anyone near there that might be of some help? DannyNow
boatless...Massachusetts___
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
T
Graham,
We've probably been down this road before, but what does your anchor roller
installation look like? I have the plain aluminium casting at the bow of
my 35-3 still.
Thanks,
Tim
Mojito
C&C 35-3
Branford, CT
On Thu, Nov 6, 2014 at 9:19 PM, Graham Collins via CnC-List <
cnc-list@cnc-list.c
Ditto, my old Nicro vent has a rechargeable Energizer 2500mah C
cell.it is 5 years old.no problems to date.I bought two in a
package and wouldn't know where to find the second one if I ever needed it.
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S
On 2014/11/07 12:34 AM, Jim Watts via
24 matches
Mail list logo
