Re: Stus-List 38 K/CB opinions

Whisper, a C&C 38/kcb, has raced well at Charleston Race Week for several years. The owner is/was from near Jacksonville, Fl. I met him and his crew a few years ago there. Perhaps he could be reached via the CRW web page. Might be worth contacting him--I spoke with him about 5 years ago but h

Re: Stus-List Fluxgate compass location - C& C 30

It may be too late or too much effort now, but a fairly tight and even twist in DC wiring will minimise magnetic effects. Steve Thomas C&C27 MKIII -Original Message- From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of kelly petew Sent: Sunday, July 08,

Re: Stus-List Fluxgate compass location - C& C 30

beside the Display/Keypad which is on the Port > Cockpit bulkhead between the Propane locker seat and the Port cockpit seat.? > Seems like it should be mounted further down closer to the centre line per > the instructions. > __

Re: Stus-List Fluxgate compass location - C& C 30

right beside the Display/Keypad which is on the Port > Cockpit bulkhead between the Propane locker seat and the Port cockpit seat.? > Seems like it should be mounted further down closer to the centre line per > the instructions. > __

Stus-List 38 K/CB opinions

A friend is looking at a 1986 C&C 38 MK3 K/CB.  Any comments (+/-) from 38 owners and listers I should forward to him?  He's looking at it primarily for club racing. Dennis C. Touche' 35-1 #83 Mandeville, LA ___ This List is provided by the C&C Photo

Re: Stus-List Spar Re-finish: Powder Coating vs Anodizing

Alex - Are you going to take the boom down to the metal? I don't think you need to. I refinished my mast and boom in 2001, and it has held up perfectly. I did put another coat of paint on it in 2008, but only because I had th

Stus-List Spar Re-finish: Powder Coating vs Anodizing

Hi, Part of my ongoing restoration has now focused on restoring the boom and spin pole. What is the consensus for a re-finish: 1) Re-anodize? 2) Powder coat? 3) Aluminum primer, epoxy filler/primer and polyurethane? One more question, how do you remove and reinstall those long bolts that go t

Re: Stus-List 1989 C&C 30 ft fluxgate compass location

I mounted mine on the aft table leg down below.    Low and near the center of the boat.   works well with the addition of the rudder position sensor. Tom Christopher !988 C&C 30 mk2 From: Leigh Mathews To: cnc-list@cnc-list.com Sent: Saturday, July 7, 2012 7:2