--- Begin Message ---
Is this -S chassis?
send output of show redundancy (this is probably the problem here)
On 5/8/2021 2:31 AM, Eugene Grosbein wrote:
Hi!
This is for Cisco 7606 with two RSP720-3CXL-GE working as AS border router with
BGP full views:
#show fabric status
slot channel spe
--- Begin Message ---
Old chassis so it doesn't support hot fabric, that's all. the -E and -S
chassis do
On 5/13/2021 4:54 AM, Eugene Grosbein wrote:
13.05.2021 8:29, Paul wrote:
Is this -S chassis?
No, old one.
send output of show redundancy (this is probably the problem here)
#show mod
--- Begin Message ---
Easily :) as long as there's not a /24 on 1000 vlans and you have
excess of 150,000 arp entries, things start to get iffy around there but
it still works, just slower
On 7/5/2021 7:20 AM, chiel wrote:
Hi,
I might going to use a 7600 with RSP720 to terminate 1000 users,
Storm control pps is bugged on the 10g ports on the older 4900
platforms, 4948E , 4900M, sup6 platforms.
Use storm control percentage based on the 10g ports instead of PPS and
the problem won't happen.
On 8/3/2022 7:05 PM, Joe Maimon via cisco-nsp wrote:
I have a vendor trying to turn up a 1
It doesn't actually remove the config when you remove the line card, it
just won't show up in show run, but if you insert the card again it will
have the config. If a different card is inserted then it will clear the
actual config, but as long as it's the same card model it should keep
the conf
