Error 71 is EPROTO. According to the Linux USB info I found, this usually
indicates some sort of hardware problem with the device.
https://www.kernel.org/doc/html/latest/driver-api/usb/error-codes.html
As per the footnote for -71:
Error codes like -EPROTO, -EILSEQ and -EOVERFLOW normally indica
:51 PM
Subject: Re: [chirp_users] chirp connecting to UV-5R from Ubuntu 16.04 on
Lenovo Carbon X1
Aubrey: Thanks for your response. We have some other software on the laptop
that works with 16.04 but seemed to become unstable with Ubuntu 18.04, so I
stuck with 16.04. I will try it later with
Aubrey: Thanks for your response. We have some other software on the laptop
that works with 16.04 but seemed to become unstable with Ubuntu 18.04, so I
stuck with 16.04. I will try it later with 20.04 when it comes out.
Glenn: Thanks too for your suggestion. Is there any web-page that gives
instru
Just out of curiosity, why did you choose to run such an old
distribution (16.04) of Ubuntu on a relatively new laptop?
I just happened to receive a marketing email from Lenovo this morning
(I've bought a few PCs from them in the past) that included the Carbon
X1 Gen 7 and I looked it up. It
I would try shaving off some of the plastic so the pins go in further.
Glenn
- Original Message -
From: Kheong Sann CHAN
To: Discussion of CHIRP
Sent: Monday, February 17, 2020 7:39 AM
Subject: Re: [chirp_users] chirp connecting to UV-5R from Ubuntu 16.04 on
Lenovo Carbon X1
I had connected the cable, tried to access it from chirpw causing it to
disconnect a few times, by the time I did dmesg. I removed out the multiple
connect/disconnect lines from dmesg output because the information was
mostly duplicate.
On Mon, Feb 17, 2020 at 7:24 PM Tom Henderson wrote:
> Just
e folks have to trim off some of the plastic allowing the connectors
>>> to go in further.
>>> Glenn
>>>
>>>
>>> - Original Message -
>>> *From:* Kheong Sann CHAN
>>> *To:* Jardy ; Discussion of CHIRP
>>>
>>> *
A few years ago I bought a cable that didn't work, the USB connector was
poorly soldered, open it and carefuly review it.
73's
El lun., 17 feb. 2020 a las 12:24, Tom Henderson ()
escribió:
> Just double checking here. The log messages below show the cable
> connecting, and then disconnecting. Ha
Just double checking here. The log messages below show the cable
connecting, and then disconnecting. Had you disconnected the cable again
before running dmesg, or did the cable fail?
Tom Henderson
On 2/16/20 11:56 PM, Kheong Sann CHAN wrote:
The tty port is found when I plug it in:
$ dmesg |
t; Some folks have to trim off some of the plastic allowing the connectors
>> to go in further.
>> Glenn
>>
>>
>> - Original Message -
>> *From:* Kheong Sann CHAN
>> *To:* Jardy ; Discussion of CHIRP
>>
>> *Sent:* Monday, February 17, 2
> - Original Message -
> *From:* Kheong Sann CHAN
> *To:* Jardy ; Discussion of CHIRP
>
> *Sent:* Monday, February 17, 2020 12:23 AM
> *Subject:* Re: [chirp_users] chirp connecting to UV-5R from Ubuntu 16.04
> on Lenovo Carbon X1
>
> Thanks for reply.
>
>
Add your user to the dialout group.
Jim KC9HI
On Mon, Feb 17, 2020, 12:58 AM Kheong Sann CHAN
wrote:
> I'm trying to connect to a UV-5R using a USB cable that was bought some
> time (maybe 5-10 years) ago, using chirpw on ubuntu 16.04.
>
> The tty port is found when I plug it in:
> $ dmesg | gre
Some folks have to trim off some of the plastic allowing the connectors to go
in further.
Glenn
- Original Message -
From: Kheong Sann CHAN
To: Jardy ; Discussion of CHIRP
Sent: Monday, February 17, 2020 12:23 AM
Subject: Re: [chirp_users] chirp connecting to UV-5R from
Thanks for reply.
I've pushed the cable in at full-strength (into the UV-5R). When I got
those results.
On Mon, Feb 17, 2020 at 2:03 PM Jardy via chirp_users <
chirp_users@intrepid.danplanet.com> wrote:
> Push the cable in VERY firmly, and try again.
>
> Jardy Dawson WA7JRD
>
> Message sent my..
Push the cable in VERY firmly, and try again.
Jardy Dawson WA7JRD
Message sent myOh, who the heck cares, anyway? Could be my shoelaces, as
far as I care!
> On Feb 16, 2020, at 21:58, Kheong Sann CHAN wrote:
>
>
> I'm trying to connect to a UV-5R using a USB cable that was bought some
I'm trying to connect to a UV-5R using a USB cable that was bought some
time (maybe 5-10 years) ago, using chirpw on ubuntu 16.04.
The tty port is found when I plug it in:
$ dmesg | grep tty
[ 7527.188154] usb 1-2: pl2303 converter now attached to ttyUSB0
[ 7548.490452] pl2303 ttyUSB0: pl2303 conv
16 matches
Mail list logo
