Original Message -
> From: "Cinaed Simson"
> To:
> Sent: Friday, October 28, 2022 8:46 PM
> Subject: Re: [chirp_users] Linux and chirp
>
>
> Hi Julian - when I plug mine into my machine running Linux i get a
> different converter
>
> FTDI USB Se
nderstand that 1. There are many Linux distros
> out there and there are no doubt subtle differences whic may need
> to be checked. 2. There are a ton of radios out there and there
> are no doubt differences.
>
>
>
>> Glenn
>> - Original Message -
>
er}
>>
>> At least it's working now.
>>
>> If wanted I can write up a "Getting Chirp up and running
>> in Linux. I do understand that 1. There are many Linux distros
>> out there and there are no doubt subtle differences whic may need
>>
ut there and there
> are no doubt differences.
>
>
>
>> Glenn
>> - Original Message -
>> From: Apostolos Kefalas
>> To: Discussion of CHIRP
>> Sent: Friday, October 28, 2022 1:19 PM
>> Subject: Re: [chirp_users] Linux and chi
and there are no doubt subtle differences whic may need
to be checked. 2. There are a ton of radios out there and there
are no doubt differences.
> Glenn
> - Original Message -
> From: Apostolos Kefalas
> To: Discussion of CHIRP
> Sent: Friday, October 28, 2022 1:
Oops - I noticed in my last mesage
ttyUSB0
was clipped to
tty
after the cut and paste.
-- Cinaed
On 10/28/22 18:46, Cinaed Simson wrote:
> Hi Julian - when I plug mine into my machine running Linux i get a
> different converter
>
> FTDI USB Serial Device converter detected
>
> instea
I have found that many cords work on radios they weren't sold for.
I have half a dozen of them around, and typically, if it fits, it ships.
Glenn
- Original Message -
From: "Cinaed Simson"
To:
Sent: Friday, October 28, 2022 8:46 PM
Subject: Re: [chirp_users] Linux and ch
Hi Julian - when I plug mine into my machine running Linux i get a
different converter
FTDI USB Serial Device converter detected
instead of the
pl2303
You might have the wrong cable.
This is the cable I purchased for mine
https://www.amazon.com/gp/product/B00HUB0ONK/ref=ppx_yo_dt_b_
Add yourself to the groups tty and dialout.
On 2022-10-28 10:27, Julian Macassey wrote:
> I am running kubuntu 22.04.1 on a Framework laptop.
>
> I have loaded the daily build from flatpak and Chirp
> comes up when opened.
>
> My radio is a Baofeng UV-5RV2+
>
> I followed th
On Fri, Oct 28, 2022 at 2:28 PM K0LNY_Glenn wrote:
>
> That is what I wondered too.
> I always use USB0 on Linux, and only use the other ports in windows.
> Glenn
Good catch Glen. I completely missed that.
Jim
___
chirp_users mailing list
chirp_users@i
That is what I wondered too.
I always use USB0 on Linux, and only use the other ports in windows.
Glenn
- Original Message -
From: Apostolos Kefalas
To: Discussion of CHIRP
Sent: Friday, October 28, 2022 1:19 PM
Subject: Re: [chirp_users] Linux and chirp
ttyS0 is usually a physical
On 2022-10-28 at 13:54, Jim Unroe (rock.un...@gmail.com) wrote:
> On Fri, Oct 28, 2022 at 1:29 PM Julian Macassey wrote:
> > In Chirp I select Radio and slide down to select "Upload
> > to Radio".
> >
> > I get a dialogue box saying:Port /dev/ttyS0, Bofeng,
> > UV5R, I select OK.
ttyS0 is usually a physical rs232 port. Are you sure that your laptop has such a port? Or do you use a usb cable and you should use ttyUSB0???On 28 Oct 2022 20:27, Julian Macassey wrote:
I am running kubuntu 22.04.1 on a Framework laptop.
I have loaded the daily build from flatpak and Chirp
come
On Fri, Oct 28, 2022 at 1:29 PM Julian Macassey wrote:
> In Chirp I select Radio and slide down to select "Upload
> to Radio".
>
> I get a dialogue box saying:Port /dev/ttyS0, Bofeng,
> UV5R, I select OK. I get "An error has occurred Could configure
> port: (5, 'Input/output error'
I am running kubuntu 22.04.1 on a Framework laptop.
I have loaded the daily build from flatpak and Chirp
comes up when opened.
My radio is a Baofeng UV-5RV2+
I followed the instructions in:
https://chirp.danplanet.com/projects/chirp/wiki/CSV_HowTo
15 matches
Mail list logo
