On Wed, Jan 13, 2021 at 12:05 PM wrote:
>
> When I looked at the details, I realized all of the frequencies I was trying
> to copy were DIG mode. Thanks for pointing out that distinction. Is there a
> Chirp manual?
>
> Rich Kramarik
>
There is a "documentation" link on the CHIRP home page.
https:
, January 13, 2021 11:28 AM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Baofeng UV-5R MK4
Hi Rich,
On Wed, Jan 13, 2021 at 11:08 AM wrote:
>
> Is there a manual I can read to understand the details/nuances for using
Chirp? I am trying to import a few lines of detail from an open
Hi Rich,
On Wed, Jan 13, 2021 at 11:08 AM wrote:
>
> Is there a manual I can read to understand the details/nuances for using
> Chirp? I am trying to import a few lines of detail from an open tab in chirp
> (Repeater list) into a different open tab that is the current IMG file for my
> radio.
: Re: [chirp_users] Baofeng UV-5R MK4
On Mon, Jan 11, 2021 at 10:34 PM ken smith wrote:
>
> I have successfully been able to use Chirp to upload .csv files etc. All
> communications between the software and radio seem to work. However, when
> manually loading HAM repeater information
Thanks Jim. I will try using the F8HP to program it. I failed to mention
that I did try to upload repeater info into the radio using RepeaterBook
but it ended up the same way as me manually programming it in chirp. I can
easily program these repeaters into the radio manually with VFO so that may
be
On Mon, Jan 11, 2021 at 10:34 PM ken smith wrote:
>
> I have successfully been able to use Chirp to upload .csv files etc. All
> communications between the software and radio seem to work. However, when
> manually loading HAM repeater information, the upload info seems to not take
> correctly.
you'll need to upload .img files not csv
download from radio, save as img file
open in chirp csv file
select data banks / slots you want
copy paste over to img
then upload
On Mon, Jan 11, 2021 at 11:33 PM ken smith wrote:
> I have successfully been able to use Chirp to upload .csv files etc. All
I have successfully been able to use Chirp to upload .csv files etc. All
communications between the software and radio seem to work. However, when
manually loading HAM repeater information, the upload info seems to not
take correctly. For example, I used the software to put in a 2m frequency,
no to
