> Is there anything that obviously stands out as severely unbalanced? The
R720XD comes with a H710 - instead of putting them in RAID0, I'm thinking a
different HBA might be a better idea, any recommendations please?
> Don't know that HBA. Does it support pass through mode or HBA mode?
H710 card do
Hi,
On 30/01/2019 02:39, Albert Yue wrote:
> As the number of OSDs increase in our cluster, we reach a point where
> pg/osd is lower than recommend value and we want to increase it from
> 4096 to 8192.
For an increase that small, I'd just do it in one go (and have done so
on our production clus
Den ons 30 jan. 2019 kl 05:24 skrev Linh Vu :
>
> We use https://github.com/cernceph/ceph-scripts ceph-gentle-split script to
> slowly increase by 16 pgs at a time until we hit the target.
>
> Somebody recommends that this adjustment should be done in multiple stages,
> e.g. increase 1024 pg ea
Hello scott,
Ive Seen a Solution from the croit Guys
Perhaps this is Related?
https://croit.io/2018/09/23/2018-09-23-debian-mirror
Greetz
Mehmet
Am 14. Januar 2019 20:33:59 MEZ schrieb Scottix :
>Wow OK.
>I wish there was some official stance on this.
>
>Now I got to remove those OSDs, downgrade
On 30.01.19 08:55, Buchberger, Carsten wrote:
> So as long as there is ip-connectivity between the client, and the
> client-network ip –adressses of our ceph-cluster everything is fine ?
Yes, client traffic is routable.
Even inter-OSD traffic is routable, there are reports from people
running ro
Hello guys,
i have a Ceph with a full S3
~# ceph health detail
HEALTH_ERR 1 full osd(s); 1 near full osd(s)
osd.2 is full at 95%
osd.5 is near full at 85%
I want to delete some bucket but when i tried to show list bucket
~# radosgw-admin bucket list
2019-01-30 11:41:47.933621 7f467a9d0780 0
Hi everybody,
I have a doubt about moving a new sata storage(new hardware too) inside of
production rack with a huge amount data.
I thinks this movimentation creates news pgs and can be reduce my
performance if i do this wrong and we don't a lot experience in a new
hardware move inside cluster.
Hi!
I thought I should first do "ceph osd out", wait for the end relocation of the
misplaced objects and after that do "ceph osd purge".
But after "purge" the cluster starts relocation again.
Maybe I'm doing something wrong? Then what is the correct way to delete the OSD
from the cluster?
WBR,
Hello,
I have my cluster set up correctly now (thank you again for the help)
I am seeking now a way to get cluster health thru API (REST) with curl command.
I had a look at manager / RESTful and Dashboard but none seems to provide
simple way to get cluster health
RESTful module do a lot of thing
On 1/30/19 2:00 PM, Fyodor Ustinov wrote:
> Hi!
>
> I thought I should first do "ceph osd out", wait for the end relocation of
> the misplaced objects and after that do "ceph osd purge".
> But after "purge" the cluster starts relocation again.
>
> Maybe I'm doing something wrong? Then what is
On 1/30/19 2:02 PM, PHARABOT Vincent wrote:
> Hello,
>
>
>
> I have my cluster set up correctly now (thank you again for the help)
>
>
>
> I am seeking now a way to get cluster health thru API (REST) with curl
> command.
>
> I had a look at manager / RESTful and Dashboard but none seems
Hi!
But unless after "ceph osd crush remove" I will not got the undersized objects?
That is, this is not the same thing as simply turning off the OSD and waiting
for the cluster to be restored?
- Original Message -
From: "Wido den Hollander"
To: "Fyodor Ustinov" , "ceph-users"
Sent: W
Hello,
Not exactly what you were looking for, but you could use the
Prometheus plugin for ceph-mgr and get the health status from the
metrics.
curl -s http://ceph-mgr-node:9283/metrics | grep ^ceph_health_status
On Wed, Jan 30, 2019 at 3:04 PM PHARABOT Vincent
wrote:
>
> Hello,
>
>
>
> I h
On Wed, 30 Jan 2019, Alexandre DERUMIER wrote:
> Hi,
>
> here some new results,
> different osd/ different cluster
>
> before osd restart latency was between 2-5ms
> after osd restart is around 1-1.5ms
>
> http://odisoweb1.odiso.net/cephperf2/bad.txt (2-5ms)
> http://odisoweb1.odiso.net/cephper
>>I don't see any smoking gun here... :/
I need to test to compare when latency are going very high, but I need to wait
more days/weeks.
>>The main difference between a warm OSD and a cold one is that on startup
>>the bluestore cache is empty. You might try setting the bluestore cache
>>size
Hello - Can I use the ceph block volume with RAID#0? Are there any
issues with this?
Thanks
Swami
___
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
Hi Stefan,
>>currently i'm in the process of switching back from jemalloc to tcmalloc
>>like suggested. This report makes me a little nervous about my change.
Well,I'm really not sure that it's a tcmalloc bug.
maybe bluestore related (don't have filestore anymore to compare)
I need to compare w
Hi
Yes it could do the job in the meantime
Thank you !
Vincent
-Message d'origine-
De : Alexandru Cucu [mailto:m...@alexcucu.ro]
Envoyé : mercredi 30 janvier 2019 14:31
À : PHARABOT Vincent
Cc : ceph-users@lists.ceph.com
Objet : Re: [ceph-users] Simple API to have cluster healthcheck ?
Den ons 30 jan. 2019 kl 14:47 skrev M Ranga Swami Reddy <
swamire...@gmail.com>:
> Hello - Can I use the ceph block volume with RAID#0? Are there any
> issues with this?
>
Hard to tell if you mean raid0 over a block volume or a block volume over
raid0. Still, it is seldom a good idea to stack red
Hi,
On 1/30/19 2:02 PM, PHARABOT Vincent wrote:
> I have my cluster set up correctly now (thank you again for the help)
What version of Ceph is this?
> I am seeking now a way to get cluster health thru API (REST) with curl
> command.
>
> I had a look at manager / RESTful and Dashboard but none
Hi Casey,
Thanks for your reply, however I tried with "--source-zone" option with sync
command but getting below error:
Sync status From slave gateway to master zone "noida1"
[cephuser@zabbix-client ~]$ radosgw-admin sync status --source-zone noida1
2>/dev/null
realm 1102c891-d81c-
Have you commit your changes on slave gateway?
First, run commit command on slave gateway and then try.
-AmitG
On Wed, 30 Jan 2019, 21:06 Krishna Verma, wrote:
> Hi Casey,
>
> Thanks for your reply, however I tried with "--source-zone" option with
> sync command but getting below error:
>
> Syn
Quick and dirty solution: take the full OSD down to issue the deletion
command ;)
Better solutions: temporarily incrase the full limit (ceph osd
set-full-ratio) or reduce the OSD's reweight (ceph osd reweight)
Paul
--
Paul Emmerich
Looking for help with your Ceph cluster? Contact us at https:
Better way is increase osd set-full-ratio slightly (.97) and then remove
buckets.
-AmitG
On Wed, 30 Jan 2019, 21:30 Paul Emmerich, wrote:
> Quick and dirty solution: take the full OSD down to issue the deletion
> command ;)
>
> Better solutions: temporarily incrase the full limit (ceph osd
> se
On 1/30/19 7:45 AM, Alexandre DERUMIER wrote:
I don't see any smoking gun here... :/
I need to test to compare when latency are going very high, but I need to wait
more days/weeks.
The main difference between a warm OSD and a cold one is that on startup
the bluestore cache is empty. You mig
Hi Patrick
Thanks for the info. If I did multiple exports, how does that work in terms
of the cache settings defined in ceph.conf, are those settings per CephFS
client or a shared cache? I.e if I've definied client_oc_size, would that
be per export?
Cheers,
On Tue, Jan 15, 2019 at 6:47 PM Patric
Hi Amit,
Still same. Please see the below output. Anything else I can try? Please update
[cephuser@zabbix-client ~]$ radosgw-admin period update --commit 2>/dev/null
Sending period to new master zone 71931e0e-1be6-449f-af34-edb4166c4e4a
[cephuser@zabbix-client ~]$ sudo systemctl start ceph-radosg
I generally have gone the crush reweight 0 route
This way the drive can participate in the rebalance, and the rebalance
only happens once. Then you can take it out and purge.
If I am not mistaken this is the safest.
ceph osd crush reweight 0
On Wed, Jan 30, 2019 at 7:45 AM Fyodor Ustinov wrote
Hello
Thanks for the info
But, nope, on Mimic (13.2.4) /api/health ends in 404 (/api/health/full,
/api/health/minimal also...)
Vincent
-Message d'origine-
De : ceph-users [mailto:ceph-users-boun...@lists.ceph.com] De la part de Lenz
Grimmer
Envoyé : mercredi 30 janvier 2019 16:26
À : c
Hi list,
I'm experimentally running single-host CephFS as as replacement for
"traditional" filesystems.
My setup is 8×8TB HDDs using dm-crypt, with CephFS on a 5+2 EC pool. All
of the components are running on the same host (mon/osd/mds/kernel
CephFS client). I've set the stripe_unit/object_size
Hi,
Am 30.01.19 um 14:59 schrieb Alexandre DERUMIER:
> Hi Stefan,
>
>>> currently i'm in the process of switching back from jemalloc to tcmalloc
>>> like suggested. This report makes me a little nervous about my change.
> Well,I'm really not sure that it's a tcmalloc bug.
> maybe bluestore rel
>>If it does, probably only by accident. :) The autotuner in master is
>>pretty dumb and mostly just grows/shrinks the caches based on the
>>default ratios but accounts for the memory needed for rocksdb
>>indexes/filters. It will try to keep the total OSD memory consumption
>>below the specifie
>>Thanks. Is there any reason you monitor op_w_latency but not
>>op_r_latency but instead op_latency?
>>
>>Also why do you monitor op_w_process_latency? but not op_r_process_latency?
I monitor read too. (I have all metrics for osd sockets, and a lot of graphs).
I just don't see latency differe
Hello Vincent,
when you install or migrate to croit, you can get a large number of REST
API's (see https://croit.io/docs/v1809/cluster#get-cluster-status) and we
support read-only users that you can create in our GUI.
If you want to use our API's from the cli, you can use our httpie-auth
plugin fr
Do can you do HA on the NFS shares?
On Wed, Jan 30, 2019 at 9:10 AM David C wrote:
> Hi Patrick
>
> Thanks for the info. If I did multiple exports, how does that work in
> terms of the cache settings defined in ceph.conf, are those settings per
> CephFS client or a shared cache? I.e if I've defi
Hi Martin Thanks for you reply !
Yes I am using "osd recovery op priority", "osd max backfills", "osd
recovery max active" and "osd client op priorit" to trying minimize the
impact in the cluster expansion.
My Ceph version is 10.2.7 Jewel and I am moving 1 osd waiting the recovery
and go to anot
Strange, I can't reproduce this with v13.2.4. I tried the following
scenarios:
pg acting 1, 0, 2 -> up 1, 0 4 (osd.2 marked out). The df on osd.2
shows 0 space, but only osd.4 (backfill target) checks full space.
pg acting 1, 0, 2 -> up 4,3,5 (osd,1,0,2 all marked out). The df for
1,0,2
Hello,
When a Ceph block device is created with a given size, does Ceph allocate
all that space right away or is that allocated as the user starts storing
the data?
I want to know if we can over provision the Ceph cluster. For example, if
we have a cluster with 10G available space, am I allowed t
On 1/30/19 9:08 PM, David Zafman wrote:
>
> Strange, I can't reproduce this with v13.2.4. I tried the following
> scenarios:
>
> pg acting 1, 0, 2 -> up 1, 0 4 (osd.2 marked out). The df on osd.2
> shows 0 space, but only osd.4 (backfill target) checks full space.
>
> pg acting 1, 0, 2 -> up
On 1/30/19 9:12 PM, Void Star Nill wrote:
> Hello,
>
> When a Ceph block device is created with a given size, does Ceph
> allocate all that space right away or is that allocated as the user
> starts storing the data?
>
> I want to know if we can over provision the Ceph cluster. For example,
> i
Did you mkfs with -O 64bit or have it in the [defaults] section of
/etc/mke2fs.conf before creating the filesystem? If you didn't 4TB is as big as
it goes and can't be changed after the fact. If the device is already larger
than 4TB when you create the filesystem, mkfs does the right then and si
I was wondering the same, from a 'default' setup I get this performance,
no idea if this is bad, good or normal.
4k r ran.
4k w ran.
4k r seq.
4k w seq.
1024k r ran.
1024k w ran.
1024k r seq.
1024k w seq.
size
lat
iops
kB/s
lat
iops
kB/s
lat
iops
Hello,
I have recently update a cluster to mimic. After the upgrade I have
started converting nodes to bluestore one by one. While ceph was
rebalancing I slapped a "nosnaptrim" on the cluster to save a bit of
IO. After the rebalancing was done I enabled the snaptrim and my osds
started flapping
Thanks Wido. Appreciate quick response.
On Wed, 30 Jan 2019 at 12:27, Wido den Hollander wrote:
>
>
> On 1/30/19 9:12 PM, Void Star Nill wrote:
> > Hello,
> >
> > When a Ceph block device is created with a given size, does Ceph
> > allocate all that space right away or is that allocated as the u
Am 30. Januar 2019 19:33:14 MEZ schrieb PHARABOT Vincent
:
>Thanks for the info
>But, nope, on Mimic (13.2.4) /api/health ends in 404 (/api/health/full,
>/api/health/minimal also...)
On which node did you try to access the API? Did you enable the Dashboard
module in Ceph manager?
Lenz
--
D
My thought was - Ceph block volume with raid#0 (means I mounted a ceph
block volumes to an instance/VM, there I would like to configure this
volume with RAID0).
Just to know, if anyone doing the same as above, if yes what are the
constraints?
Thanks
Swami
On Wed, Jan 30, 2019 at 7:56 PM Janne Jo
46 matches
Mail list logo
