Hi Anthony and Serkan,
I think Anthony had the right idea. I forgot that we re-deployed a number of
OSDs on existing drives and also did a PG split over Christmas. The relatively
few disks that stick out with cache_other usage seem all to be these newly
deployed OSDs. So, it looks like that the
Hi Igor,
my approach here, before doing something crazy like a daily cron job for
restarting OSDs, is to do at least a minimum of thread analysis. How much of a
problem is it really? I'm here also mostly guided by performance loss. As far
as I know, the onode cache should be one of the most imp
Hi
I facing similar error a couple of days ago:
radosgw-admin --cluster=cl00 realm create --rgw-realm=data00 --default
...
(0 rgw main: rgw_init_ioctx ERROR: librados::Rados::pool_create returned
(34) Numerical result out of range (this can be due to a pool or placement
group misconfiguration, e.g
Hi everyone,
I'm facing a weird issue with one of my pacific clusters.
Brief into:
- 5 Nodes Ubuntu 20.04. on 16.2.7 ( ceph01…05 )
- bootstrapped with cephadm recent image from quay.io (around 1 year ago)
- approx. 200TB capacity 5% used
- 5 OSD (2 HDD / 2 SSD / 1 NVMe) on each node
- each node
Dear Xiubo,
could you explain how to enable kernel debug logs (I assume this is on the
client)?
Thanks,
Manuel
On Fri, May 13, 2022 at 9:39 AM Xiubo Li wrote:
>
> On 5/12/22 12:06 AM, Stefan Kooman wrote:
> > Hi List,
> >
> > We have quite a few linux kernel clients for CephFS. One of our
> >
Hi,
apparently this config option has been removed between N and O
releases. I found this revision [1] from 2019 and the pull request [2]
in favor of adjusting the journal fetch based on memory target. I
didn't read the whole conversation but to me it looks like the docs
are outdated and
Hi,
I am just reading through this document (
https://docs.ceph.com/en/octopus/radosgw/config-ref/) and on the top is
states:
The following settings may added to the Ceph configuration file (i.e.,
> usually ceph.conf) under the [client.radosgw.{instance-name}] section.
>
And my ceph.conf looks li
Hi,
> On 12 Jan 2023, at 04:35, Robert Sander wrote:
>
> How can I get the current min_allloc_size of OSDs that were created with
> older Ceph versions? Is there a command that shows this info from the on disk
> format of a bluestore OSD?
You can see this via kvstore-tool:
ceph-kvstore-tool
Hi,
Am 13.01.23 um 14:35 schrieb Konstantin Shalygin:
ceph-kvstore-tool bluestore-kv /var/lib/ceph/osd/ceph-0/ get S min_alloc_size
This only works when the OSD is not running.
Regards
--
Robert Sander
Heinlein Consulting GmbH
Schwedter Str. 8/9b, 10119 Berlin
http://www.heinlein-support.de
I think this would be valuable to have easily accessible during runtime,
perhaps submit a report (and patch if possible)?
David
On Fri, Jan 13, 2023, at 08:14, Robert Sander wrote:
> Hi,
>
> Am 13.01.23 um 14:35 schrieb Konstantin Shalygin:
>
> > ceph-kvstore-tool bluestore-kv /var/lib/ceph/os
Hi everyone,
Our telemetry service is up and running again.
Thanks Adam Kraitman and Dan Mick for restoring the service.
We thank you for your patience and appreciate your contribution to the
project!
Thanks,
Yaarit
On Tue, Jan 3, 2023 at 3:14 PM Yaarit Hatuka wrote:
> Hi everyone,
>
> We are
Hello!
Yesterday we found some errors in our cephadm disks, which is making it
impossible to access our HPC Cluster:
# ceph health detail
HEALTH_WARN 3 failed cephadm daemon(s); insufficient standby MDS daemons
available
[WRN] CEPHADM_FAILED_DAEMON: 3 failed cephadm daemon(s)
daemon mds.cephf
Hi all,
on an octopus latest cluster I see a lot of these log messages:
Jan 13 20:00:25 ceph-21 journal: 2023-01-13T20:00:25.366+0100 7f47702b8700 -1
--2- [v2:192.168.16.96:6826/5724,v1:192.168.16.96:6827/5724] >>
[v2:192.168.16.93:6928/3503064,v1:192.168.16.93:6929/3503064]
conn(0x55c86762440
Eugen,
Thank you for the tip. While writing a script is ok, it would be nice if
therewas an official way to do this.
-Chris
-Original Message-
From: Eugen Block
To: ceph-users@ceph.io
Sent: Thu, Jan 12, 2023 8:58 am
Subject: [ceph-users] Re: pg mapping verification
Hi,
I don't hav
rhys.g.pow...@gmail.com
___
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io
Ceph Pacific 16.2.9
We have a storage server with multiple 1.7TB SSDs dedicated to the bluestore DB
usage. The osd spec originally was misconfigured slightly and had set the
"limit" parameter on the db_devices to 5 (there are 8 SSDs available) and did
not specify a block_db_size. ceph layed
I am really hoping you can help. THANKS in advance. I have inherited a Docker
swarm running CEPH but I know very little about it.
Current I have an unhealthy ceph environment that will not mount my data drive.
Its a cluster of 4 vm servers. docker01,docker02, docker03, docker-cloud
CL has the /da
Aditional information:
- We tried to reset bothe the services and the entire machine
- journalctl part:
jan 13 02:40:18 s1.ceph.infra.ufscar.br
ceph-bab39b74-c93a-4e34-aae9-a44a5569d52c-mon-s1[6343]: debug
2023-01-13T05:40:18.653+ 7fc370b64700 0 log_channel(cluster) log [WRN] :
Replacing
Hello,
We are running an older version of ceph - 14.2.22 nautilus
We have a radosgw/s3 implementation and had some issues with multi-part uploads
failing to complete.
We used s3cmd to delete the failed uploads and clean out the bucket, but when
reviewing the space utilization of buckets, it se
19 matches
Mail list logo
