It looks that I have solved the issue.
I tried:
ceph.conf
[osd]
osd_memory_target = 1073741824
systemctl restart ceph-osd.target
when i run
ceph config get osd.40 osd_memory_target it returns:
4294967296
so this did not work.
Next I tried:
ceph tell osd.* injectargs '--osd_memory_targ
Hi, I try to make a new crush rule (Nautilus) in order take the new
correct_failure_domain to hosts:
"rule_id": 2,
"rule_name": "nxtcloudAFhost",
"ruleset": 2,
"type": 3,
"min_size": 3,
"max_size": 7,
"steps": [
{
"op":
Yes it is possible, but you should validate it with crushtool before
injecting it to make sure the PGs land where they belong.
crushtool -i crushmap.bin --test --rule 2 --num-rep 7 --show-mappings
crushtool -i crushmap.bin --test --rule 2 --num-rep 7 --show-bad-mappings
If you don't get bad ma
Ok, thank you very much for the answer.
El 6/5/21 a las 13:47, Eugen Block escribió:
> Yes it is possible, but you should validate it with crushtool before
> injecting it to make sure the PGs land where they belong.
>
> crushtool -i crushmap.bin --test --rule 2 --num-rep 7 --show-mappings
> crush
I have this error when try to show mappings with crushtool:
# crushtool -i crush_map_new --test --rule 2 --num-rep 7 --show-mappings
CRUSH rule 2 x 0 [-5,-45,-49,-47,-43,-41,-29]
*** Caught signal (Segmentation fault) **
in thread 7f7f7a0ccb40 thread_name:crushtool
El 6/5/21 a las 13:47, Euge
Interesting, I haven't had that yet with crushtool. Your ceph version
is Nautilus, right? And you did decompile the binary crushmap with
crushtool, correct? I don't know how to reproduce that.
Zitat von Andres Rojas Guerrero :
I have this error when try to show mappings with crushtool:
# c
Hello,
I'm trying to deploy my test ceph cluster and enable stretch mode (
https://docs.ceph.com/en/latest/rados/operations/stretch-mode/). My problem
is enabling the stretch mode.
$ ceph mon enable_stretch_mode ceph-node-05 stretch_rule datacen
Hi all,
I lost 2 OSDs deployed on a single Kingston SSD in a rather strange way and am
wondering if anyone has made similar observations or is aware of a firmware bug
with these disks.
Disk model: KINGSTON SEDC500M3840G (it ought to be a DC grade model with super
capacitors)
Smartctl does not
Hello Ceph,
Can you set the SSL min version? Such as TLS1.2?
Glen
This e-mail is intended solely for the benefit of the addressee(s) and any
other named recipient. It is confidential and may contain legally privileged or
confidential information. If you are not the recipient, any use, distribut
Yes, my ceph version is Nautilus:
# ceph -v
ceph version 14.2.6 (f0aa067ac7a02ee46ea48aa26c6e298b5ea272e9) nautilus
(stable)
First dump the crush map:
# ceph osd getcrushmap -o crush_map
Then, decompile the crush map:
# crushtool -d crush_map -o crush_map_d
Now, edit the crush rule and co
Hi Frank,
I’m running the same SSDs (approx. 20) in Dell servers on HBA330’s. Haven’t
had any issues and have suffered at least one power outage. Just checking the
wcache setting and it shows as enabled.
Running Octopus 15.1.9 and docker containers. Originally part of a Proxmox
cluster but
On 05/06 14:03, mabi wrote:
> Hello,
>
> I have a small 6 nodes Octopus 15.2.11 cluster installed on bare metal with
> cephadm and I added a second OSD to one of my 3 OSD nodes. I started then
> copying data to my ceph fs mounted with kernel mount but then both OSDs on
> that specific nodes cra
Hi Christoph,
I am currently using Nautilus on a ceph cluster with osd_memory_target
defined in ceph.conf on each node.
By running :
ceph config get osd.40 osd_memory_target
you get the default value for the parameter osd_memory_target
(4294967296 for nautilus)
If you change the ceph.conf
Hi, hoping someone could help me get to the bottom of this particular issue I'm
having.
I have ceph octopus installed using ceph-ansible.
Currently, I have 3 MDS servers running, and one client connected to the active
MDS. I'm currently storing a very large encrypted container on the CephFS fil
Hi all,
upon updating to 16.2.2 via cephadm the upgrade is being stuck on the
first mgr
Looking into this via docker logs I see that it is still loading modules
when it is apparently terminated and restarted in a loop
When pausing the update, the mgr succeeds to start with the new version,
Hi!
I hit the same issue. This was a bug in 16.2.0 that wasn't completely
fixed, but I think we have it this time. Kicking of a 16.2.3 build
now to resolve the problem.
(Basically, sometimes docker calls the image docker.io/ceph/ceph:foo
and somethings it's ceph/ceph:foo, and our attempt to nor
Hello ceph community,
I'm trying to upgrade a pacific (v16.2.0) cluster to the last version,
but the upgrading process seems to be stuck. The mgr log (debug level)
does not show any significant message regarding the upgrade, other than
when it is started/paused/resumed/stopped.
2021-05-06T14
Am 06.05.21 um 17:18 schrieb Sage Weil:
> I hit the same issue. This was a bug in 16.2.0 that wasn't completely
> fixed, but I think we have it this time. Kicking of a 16.2.3 build
> now to resolve the problem.
Great. I also hit that today. Thanks for fixing it quickly.
Regards
--
Robert Sand
Hi Andrew,
thanks, that is reassuring. To be sure, I plan to do a few power out tests with
this server. Never had any issues with that so far, its the first time I see a
corrupted OSD.
Best regards,
=
Frank Schilder
AIT Risø Campus
Bygning 109, rum S14
_
Hello,
I have a small 6 nodes Octopus 15.2.11 cluster installed on bare metal with
cephadm and I added a second OSD to one of my 3 OSD nodes. I started then
copying data to my ceph fs mounted with kernel mount but then both OSDs on that
specific nodes crashed.
To this topic I have the followin
This is the third backport release in the Pacific series. We recommend
all users update to this release.
Notable Changes
---
* This release fixes a cephadm upgrade bug that caused some systems to
get stuck in a loop restarting the first mgr daemon.
Getting Ceph
* Git at
Thank you very much for the hint regarding the log files, I wasn't aware that
it still saves the logs on the host although everything is running in
containers nowadays.
So there was nothing in the log files but I could find out that finally the
host (a RasPi4) could not cope with 2 SSD external
Hi Andres,
does the commando work with the original rule/crushmap?
___
Clyso GmbH - Ceph Foundation Member
supp...@clyso.com
https://www.clyso.com
Am 06.05.2021 um 15:21 schrieb Andres Rojas Guerrero:
Yes, my ceph version is Nautilus:
# ceph -v
ceph version 14
Hello, I have 6 hosts with 12 SSD disks on each host for a total of 72 OSD,
I am using CEPH Octopos in its latest version, the deployment was done
using ceph admin and containers according to the dosing, we are having some
problems with performance of the cluster, I mount it on a proxmox cluster
an
We need more details, but are you using krbd? iothread? and so on?
Il giorno gio 6 mag 2021 alle ore 22:38 codignotto
ha scritto:
> Hello, I have 6 hosts with 12 SSD disks on each host for a total of 72 OSD,
> I am using CEPH Octopos in its latest version, the deployment was done
> using ceph ad
Hello Mario, yes I am using KRBD in the proxmox, ceph is a separate
cluster and proxmox another cluster, I connect the CEPH to the promox
using the RBD and in the configuration of the storage I select KRBD,
IO and SSD
Em qui., 6 de mai. de 2021 às 18:15, Mario Giammarco
escreveu:
> We need more
Has anybody run into a 'stuck' OSD service specification? I've tried
to delete it, but it's stuck in 'deleting' state, and has been for
quite some time (even prior to upgrade, on 15.2.x). This is on 16.2.3:
NAME PORTS RUNNING REFRESHED AGE PLACEMENT
osd.osd_spec5
Nautilus cluster is not unmapping
ceph 14.2.16
ceph report |grep "osdmap_.*_committed"
report 1175349142
"osdmap_first_committed": 285562,
"osdmap_last_committed": 304247,
we've set osd_map_cache_size = 2
but its is slowly growing to that difference as well
OSD map first committ
Hi Joe,
are all PGs active+clean? If not, you will only get osdmap pruning, which
will try to keep only every 10th osdmap.
https://docs.ceph.com/en/latest/dev/mon-osdmap-prune/
If you have remapped PGs and need to urgently get rid of osdmaps, you can
try the upmap-remapped script to get to a pseu
No, it doesn't work with an unedit crush map file.
El 6/5/21 a las 18:28, Clyso GmbH - Ceph Foundation Member escribió:
Hi Andres,
does the commando work with the original rule/crushmap?
___
Clyso GmbH - Ceph Foundation Member
supp...@clyso.com
https://www.cl
But, it another cluster with version 14.2.16, it's working ... it's
seems a problem of the version 14.2.6 ...?
El 6/5/21 a las 18:28, Clyso GmbH - Ceph Foundation Member escribió:
Hi Andres,
does the commando work with the original rule/crushmap?
___
Clyso Gmb
31 matches
Mail list logo
