On Mon, 2020-08-31 at 14:36 +, Eugen Block wrote:
> > Disks are utilized roughly between 70 and 80 percent. Not sure why
> > would operations slow down when disks are getting more utilization.
> > If that would be the case, I'd expect Ceph to issue a warning.
>
> It is warning you, that's why
Disks are utilized roughly between 70 and 80 percent. Not sure why
would operations slow down when disks are getting more utilization.
If that would be the case, I'd expect Ceph to issue a warning.
It is warning you, that's why you see slow requests. ;-) But just to
be clear, by utilization I
Hey Eugen,
On Wed, 2020-08-26 at 09:29 +, Eugen Block wrote:
> Hi,
>
> > > root@cephosd01:~# ceph config get mds.cephosd01 osd_op_queue
> > > wpq
> > > root@0cephosd01:~# ceph config get mds.cephosd01
> > > osd_op_queue_cut_off
> > > high
>
> just to make sure, I referred to OSD not MDS sett
Hi Dave,
On Tue, 2020-08-25 at 15:25 +0100, david.neal wrote:
> Hi Momo,
>
> This can be caused by many things apart from the ceph sw.
>
> For example I saw this once with the MTU in openvswitch not fully
> matching on a few nodes . We realised this using ping between nodes.
> For a 9000 MTU:
>
Hi,
root@cephosd01:~# ceph config get mds.cephosd01 osd_op_queue
wpq
root@0cephosd01:~# ceph config get mds.cephosd01 osd_op_queue_cut_off
high
just to make sure, I referred to OSD not MDS settings, maybe check again?
I wouldn't focus too much on the MDS service, 64 GB RAM should be
enough,
nd up and testing might be the way to go?
Kind regards,
Dave
-- Original Message --
From: "Momčilo Medić"
To: ceph-users@ceph.io
Sent: Tuesday, 25 Aug, 2020 At 14:36
Subject: [ceph-users] Re: Persistent problem with slow metadata
Hi friends,
I was re-reading documentation[1] when
Hi friends,
I was re-reading documentation[1] when I noticed that 64GiB of RAM
should suffice even for a 1000 clients.
That really makes our issue that much more difficult to troubleshoot.
There are no assumptions that I can make that can encompass all of the
details I observe.
With no assumption
Hi Eugen,
On Mon, 2020-08-24 at 14:26 +, Eugen Block wrote:
> Hi,
>
> there have been several threads about this topic [1], most likely
> it's
> the metadata operation during the cleanup that saturates your disks.
>
> The recommended settings seem to be:
>
> [osd]
> osd op queue = wpq
> o
Hi,
there have been several threads about this topic [1], most likely it's
the metadata operation during the cleanup that saturates your disks.
The recommended settings seem to be:
[osd]
osd op queue = wpq
osd op queue cut off = high
This helped us a lot, the number of slow requests has dec
