Hi,
Can you see logs at the vdsm.log file? What exactly happened on storage domain
connection?
k
Sent from my iPhone
> On 26 Apr 2023, at 00:37, kushagra.gu...@hsc.com wrote:
>
> Hi Team,
>
> We are trying to integrate ceph with ovirt.
> We have deployed ovirt 4.4.
> We want to create a sto
Hi Gaël,
I'm actually embarking on a similar project to migrate EC pool from
k=2,m=1 to k=4,m=2 using rgw multi site sync.
I just thought I'd check before you do a lot of work for nothing that
when you say failure domain that's the crush failure domain you mean,
not k and m? If it is failure domain
Absolutely.
Moreover, PGs are not a unit of size, they are a logical grouping of smaller
RADOS objects, because a few thousand PGs are a lot easier and less expensive
to manage than tens or hundreds of millions of small underlying RADOS objects.
They’re for efficiency, and are not any set size
Hi Wodel,
The simple explanation is that PGs are a level of storage abstraction above
the drives (OSD) and below objects (pools). The links below may be
helpful. PGs consume resources, so they should be planned as best you
can. Now you can scale them up and down, and use autoscaler, so you don'
Hi,
I am learning Ceph and I am having a hard time understanding PG and PG
calculus .
I know that a PG is a collection of objects, and that PG are replicated
over the hosts to respect the replication size, but...
In traditional storage, we use size in Gb, Tb and so on, we create a pool
from a bu
Hi there,
I have ceph cluster created by ceph-volume - bluestore, in every
node is 12 HDD and 1 NVMe, which is divided to 24 LVM partition
for DB and WAL.
I've turned this cluster to 'ceph orch' management, then I've
moved to quincy release (now I'm using a 17.2.5 version).
I had to move whole c
On Quincy:
The zone-group policy has the same problem. with a similar setup. Way to
reproduce:
- Setup 3-way symmetrical replication on zone-group level
- Switch zone-group to 'allowed' (zones are not in sync).
- Add content to the detached zone(s)
- Switch it back to 'enabled' (3-way symmetri
How about tracking the stuff in a single Etherpad?
https://pad.ceph.com/p/prs-to-have-16.2.13
On Mon, Apr 24, 2023 at 9:01 PM Cory Snyder wrote:
>
> Hi Yuri,
>
> We were hoping that the following patch would make it in for 16.2.13 if
> possible:
>
> https://github.com/ceph/ceph/pull/51200
>
> T
Hello, ceph gurus,
We are trying multisite sync policy feature with Quincy release and we
encounter something strange, which we cannot solve even after combing through
the internet for clues. Our test setup is very simple. I use mstart.sh to spin
up 3 clusters, configure them with a single real
I have two osds. these osd are used to rgw index pool. After a lot of
stress tests, these two osds were written to 99.90%. The full ratio
(95%) did not take effect? I don't know much. Could it be that if the
osd of omap is fully stored, it cannot be limited by the full ratio?
ALSO I use ceph-blues
I observed that on an otherwise idle cluster, scrubbing cannot fully utilise
the speed of my HDDs.
`iostat` shows only 8-10 MB/s per disk, instead of the ~100 MB/s most HDDs can
easily deliver.
Changing scrubbing settings does not help (see below).
Environment:
* 6 active+clean+scrubbing+deep
Than you for your suggest!
I have already deleated the lvm both of the Block and DB devices.
I monitored the creating process of OSD.23. with the command-line "podman ps
-a".
The osd.23 apeared for a shorted time, then was deleated.
The feedback of the command-line
"compute11:data_devices=/dev/s
Dear Ceph users,
my cluster is made of very old machines on a Gbit ethernet. I see that
sometimes some OSDs are marked down due to slow networking, especially
on heavy network load like during recovery. This causes problems, for
example PGs keeps being deactivated and activated as the OSDs are
Hello,
i'm maintaining a 3 small infrastructures in NL.
7 primary, 4 secondary and 3 testing proxmox nodes (hyperconverged).
Till now we only use the embedded RBD facilities of proxmox using ceph 17.2.5
To facilitate S3/swift and persistent storage to our internal k8s cluster i am
looking around
Hi folks,
We are trying multisite sync policy feature with Quincy release and we
encounter something strange. Maybe our understanding of sync policy is
incorrect. I hope the community could help us uncover the mystery.
Our test setup is very simple. I use mstart.sh to spin up 3 clusters, config
Hi All,
We have a RGW cluster running Luminous (12.2.11) that has one object with an
extremely large OMAP database in the index pool. Listomapkeys on the object
returned 390 Million keys to start. Through bilog trim commands, we’ve whittled
that down to about 360 Million. This is a bucket index
HI,
I build a Ceph Cluster with cephadm.
Every cehp node has 4 OSDs. These 4 OSD were build with 4 HDD (block) and 1 SDD
(DB).
At present , one HDD is broken, and I am trying to replace the HDD,and build
the OSD with the new HDD and the free space of the SDD. I did the follows:
#ceph osd stop
$ rbd map xxx
rbd: sysfs write failed
2023-04-21 11:29:13.786418 7fca1bfff700 -1 librbd::image::OpenRequest: failed
to retrieve image id: (5) Input/output error
2023-04-21 11:29:13.786456 7fca1b7fe700 -1 librbd::ImageState: 0x55a60108a040
failed to open image: (5) Input/output error
rbd: error o
Hi All,
We have a CephFS cluster running Octopus with three control nodes each running
an MDS, Monitor, and Manager on Ubuntu 20.04. The OS drive on one of these
nodes failed recently and we had to do a fresh install, but made the mistake of
installing Ubuntu 22.04 where Octopus is not availabl
Hi Team,
We are trying to integrate ceph with ovirt.
We have deployed ovirt 4.4.
We want to create a storage domain of POSIX compliant type for mounting a ceph
based infrastructure in ovirt.
We have done SRV based resolution in our DNS server for ceph mon nodes but we
are unable to create a stor
Hi again,
Is there a limit/best-practice regarding number of clones? I'd like to start
development, but want to make sure I won't run into scaling issues.
Perspectivus
___
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to
I find a log like this, and I thought the bucket name should be "photos":
[2023-04-19 15:48:47.0.5541s] "GET /photos/shares/
But I can not find it:
radosgw-admin bucket stats --bucket photos
failure: 2023-04-19 15:48:53.969 7f69dce49a80 0 could not get bucket info for
bucket=photos
(20
I find that I cannot re-add a disk to a Ceph cluster after the OSD on the disk
is removed. Ceph seems to know about the existence of these disks, but not
about their "host:dev" information:
```
# ceph device ls
DEVICE HOST:DEV DAEMONS WEAR LIFE
EXPE
Hey all,
I recently had a k8s node failure in my homelab, and even though I powered it
off (and it's done for, so it won't get back up), it still shows up as watcher
in rbd status.
```
root@node0:~# rbd status kubernetes/csi-vol-3e7af8ae-ceb6-4c94-8435-2f8dc29b313b
Watchers:
watcher=10.
Maybe he is limited by the supported OS
>
> I would create a new cluster with Quincy and would migrate the data from
> the old to the new cluster bucket by bucket. Nautilus is out of support
> and
> I would recommend at least to use a ceph version that is receiving
> Backports.
>
> huxia...@ho
I would create a new cluster with Quincy and would migrate the data from
the old to the new cluster bucket by bucket. Nautilus is out of support and
I would recommend at least to use a ceph version that is receiving
Backports.
huxia...@horebdata.cn schrieb am Di., 25. Apr.
2023, 18:30:
> Dear Ce
Thanks a lot for the valuable input, Wesley, Josh, and Anthony.
It seems the best practice would be upgrade first, and then expand, remove old
nodes afterwards.
best regards,
Samuel
huxia...@horebdata.cn
From: Wesley Dillingham
Date: 2023-04-25 19:55
To: huxia...@horebdata.cn
CC: ceph-user
Hi ceph users,
I've been trying out the lua scripting for the rados gateway (thanks Yuval).
As in my previous email I mentioned that there is an error when trying to
load the luasocket module. However, I thought it was a good time to report
on my progress.
My 'hello world' example below is calle
Dear all,
We are experiencing with Ceph after deploying it by PVE with the network backed
by a 10G Cisco switch with VPC feature on. We are encountering a slow OSD
heartbeat and have not been able to identify any network traffic issues.
Upon checking, we found that the ping is around 0.1ms, and
Hi folks,
Within a zonegroup, once a bucket is created, its metadata is sync-ed over to
all zones. With bucket-level sync policy, however, its content may or may not
be sync-ed over. To simplify the sync process, sometime I'd like to pick the
bucket in a zone as the absolute truth and sync its c
Hi,
I've noticed that when my lua script runs I get the following error on my
radosgw container. It looks like the lib64 directory is not included in the
path when looking for shared libraries.
Copying the content of lib64 into the lib directory solves the issue on the
running container.
Here ar
Get on nautilus first and (perhaps even go to pacific) before expansion.
Primarily for the reason that starting in nautilus degraded data recovery
will be prioritized over remapped data recovery. As you phase out old
hardware and phase in new hardware you will have a very large amount of
backfill
Hi Samuel,
While the second method would probably work fine in the happy path, if
something goes wrong I think you'll be happier having a uniform
release installed. In general, we've found the backfill experience to
be better on Nautilus than Luminous, so my vote would be for the first
method. Giv
Dear Ceph folks,
I would like to listen to your advice on the following topic: We have a 6-node
Ceph cluster (for RGW usage only ) running on Luminous 12.2.12, and now will
add 10 new nodes. Our plan is to phase out the old 6 nodes, and run RGW Ceph
cluster with the new 10 nodes on Nautilus ver
Hi,
I'm trying to set a kafka endpoint for bucket object create operation
notifications but the notification is not created in kafka endpoint.
Settings seems to be fine because I can upload to the bucket objects when these
settings are applied:
NotificationConfiguration>
bulknotif
Seems like the per-host config was actually introduced in 16.2.11:
https://github.com/ceph/ceph/pull/48103
So I'm gonna have to wait for 16.2.13. Sorry for the noise.
Zitat von Eugen Block :
I looked a bit deeper and compared to a similar customer cluster
(16.2.11) where I had to reconfigure
I looked a bit deeper and compared to a similar customer cluster
(16.2.11) where I had to reconfigure grafana after an upgrade anyway.
There it seems to work as expected with the per-host certificate. I
only added the host-specific certs and keys and see the graphs in the
dashboard while on
>>
>>
>> We have a customer that tries to use veeam with our rgw objectstorage and
>> it seems to be blazingly slow.
>> What also seems to be strange, that veeam sometimes show "bucket does not
>> exist" or "permission denied".
>> I've tested parallel and everything seems to work fine from the
Hi,
I’ve tested that combination once last year. My experience was similar. It was
dead-slow.
But if I remember correctly my conclusion was that Veeam was sending very
slowly lots of rather small objects without any parallelism.
But apart from the cruel slowness I didn’t have problems of the “bu
Den tis 25 apr. 2023 kl 15:02 skrev Boris Behrens :
>
> We have a customer that tries to use veeam with our rgw objectstorage and
> it seems to be blazingly slow.
> What also seems to be strange, that veeam sometimes show "bucket does not
> exist" or "permission denied".
> I've tested parallel and
We have a customer that tries to use veeam with our rgw objectstorage and
it seems to be blazingly slow.
What also seems to be strange, that veeam sometimes show "bucket does not
exist" or "permission denied".
I've tested parallel and everything seems to work fine from the s3cmd/aws
cli standpoin
Hi Yixin,
On 4/25/23 00:21, Yixin Jin wrote:
Actually, "bucket sync run" somehow made it worse since now the destination zone shows
"bucket is caught up with source" from "bucket sync status" even though it clearly missed
an object.
On Monday, April 24, 2023 at 02:37:46 p.m. EDT, Yixin
42 matches
Mail list logo
