Dear All,
Tahnks to all you guys for immediate reply
by the way i jus hav modified the firewall by explicitly specifiying a
rule to block ssh traffic from outside
i will wait for sometime and check the log again
thnaks again guys
apprecite your replies
Regards
Fabian
> 2009/6/19 Ci
>
>
>> > [Normal log stuff from dictionary attack deleted...]
>>
>> This is common, and, presuming you have good passwords or only
>> accept authorized_keys, not a real problem other than large log
>> files.
>>
>> Look at fail2ban for a method that will automatically add
>> iptables blocks when thi
tried to see the /var/logs/Xorg.0.log but no much information
when i run system config display my display card is detected n it works fine
apprecite if someone can advice n help
regards
fabian
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
removed the clamscan entry
from my crontab file so as to diable it
but the problem still persists
i wanted to disble all the daily crontab jobs but i jus wanted to know
which process could be actually causing this
appreciate your advice and help
regards
fabian
--
This message has been scanned
> 2009/7/5 fabian
>
>>
>> i notced recently that the cpu utilization peaks to abt 100 % at 4 am
>> every day and becomes normall at 10 am
>>
>>
>> cpu 4.5%us 2.3% sy 0.0%ni 2% id 95% wa
>>
>> notice the 95% wa
>>
>>
> It
prit cause the CPU wait state to almost 99 %
for almost 6 hrs
but jus would like to know if this particular script has any signifance or
any perfomance issue and my system will run perfect without the file
apprecite you help
regards
Fabian
> fabian wrote:
>>> 2009/7/5 fabian
mode and the same problem
i ty to delete this directory i cannot
actually since the tmpwatch cron job was clearing files in /var/tmp/havp
it was hangging
apprecite some help n advice how to get reid of this directory
Regards
Fabian
> fabian wrote:
>> Dear Guys
>>
>> Than
> fabian wrote:
>
>> apprecite some help n advice how to get reid of this directory
>
> Is /var/ on a separate file system? It sounds like there is just
> a massive amount of files there, if /var is split out then you
> can move all other data off of /var and reformat it,
> fabian wrote:
>>> fabian wrote:
>>>
>>>> apprecite some help n advice how to get reid of this directory
>>> Is /var/ on a separate file system? It sounds like there is just
>>> a massive amount of files there, if /var is split out then you
>
Dear All,
I am sorry for the post here but really apprecite if someone could help me
or advise.
actually i just could not subscribe to sendmail mailing list
I have the following setup for a long time on a single computer
Centos server running as my primary Mail & Dns server
CentOS release 5 (F
really get the hang of it.
to my understanding heartbeat works on service which one would like to
mirror but for me i would like disk mirroring on different servers
any body has done the above
apprecite your advice and help
regards
fabian
--
This message has been scanned for viruses and
en you have production machine using such modules (sitting in
the extras repository, or third-party), i advice you to exclude the
kernel (exclude=) in your yum config ... i *always* update manually such
things, especially when dealing with sensitive data that needs to be
replicated through DRBD
eed the centosplus kernel for drbd support? I thought I
> did, but now I'm not sure.
No, you don't need the centosplus kernel to use DRBD ... but actually
there is no (not yet) kmod-drbd for the current (and updated) CentOS 5.1
kernel. They'll appear soon
--
Fabian Arrotin
tual] Expansion ROM at 8000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
Capabilities: [60] Express Endpoint IRQ 0
Capab
On Wed, 2007-12-12 at 11:28 +0100, Fridtjof Busse wrote:
> * Fabian Arrotin <[EMAIL PROTECTED]>:
> > I've just installed today a server from Hetzner.de (on a AMD Athlon x2
> > x86_64) using this card in blind mode and it's working with the
> > supplied driver
On Wed, 2007-12-12 at 11:49 +0100, Fridtjof Busse wrote:
> * Fabian Arrotin <[EMAIL PROTECTED]>:
> > I've installed it with success on a DS3000 too .. but i didn't use
> > LARA ...
> > I've mostly (i've changed some parameters though) use
On Wed, 2007-12-12 at 12:13 +0100, Fridtjof Busse wrote:
> * Fabian Arrotin <[EMAIL PROTECTED]>:
> > 5.1 x86_64 with the r8168-2.6.18-53.el5-i686-x86_64.img.zip driverdisk
> > image ...
>
> Thanks for the hint, it seems to work.
> Now could someone please explain
that's normal.
Notice also that vmware server 2.0 (in beta now) supports RHEL5/CentOS
5.x out of the box.
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
signature.asc
to rebuild the rdac kmod ...
>
> Has anyone had any issues with scanning for new devices off san after
> upgrading to 5.1 ?
>
> Thanks,
> Finnur
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' |
lied on the forum) : No, that's not supported ... either
you download the DVD/CDs or you install from your lan but you have to
create a local mirror yourself
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
si
9.ko unsuccessfully. It load but no device is
> detected. No dmesg or /var/log/message.
>
> ¿Any help on how I can configure correctly this ethernet device?
Have you tested with the driver disk provided here :
http://wiki.centos.org/HardwareList/CentOS5/RealTek/r1000 ?
--
Fabian Arrotin
st skip that
> step
> and lets say have my new program go full screen (in the vnc window).
>
> Is that possible and how? THanks,
It's because you use twm ... configure vnc to start another desktop
environment ... ? check your ~/.vnc/xstartup (iirc : i don't use vnc)
--
Fabi
vpn client, i've rebuilt the pptpconfig pptp client
(gtk interface) and all the deps and they are now also on
http://centos.karan.org/el5/extras/testing/i386/RPMS/ ...
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq'
On Sun, 2008-01-06 at 13:06 -0500, Mark Weaver wrote:
> Fabian Arrotin wrote:
> > It seems everybody already answered the first two points ...
> > Regarding the pptp vpn client, i've rebuilt the pptpconfig pptp client
> > (gtk interface) and all the deps and the
On Sun, Jan 06, 2008 at 05:58:35PM -0500, Mark Weaver wrote:
> Fabian Arrotin wrote:
>
> Ok... I finally got everything installed, however when ever I run the
> client and establish a connection, the moment any data begins to pass
> back and forth the entire system locks up tig
s,
> Tim
+1 : i've used mpp/rdac on different CentOS 4.x kernels (including a
setup i've made last week) including latest 4.6 errata kernels and i had
no problems .. so why stick with an old kernel ?
--
Fabian Arrotin <[EMAIL PROTECTED]>
"Internet network currently down, TCP
third-party repositories ..
Otherwise, try to find an existing SRPM that can be rebuild and/or
submit a spec file ;-)
--
Fabian Arrotin <[EMAIL PROTECTED]>
"Internet network currently down, TCP/IP packets delivered now by
UPS/Fedex ..."
signa
alled it with RAID 0 ...
Recreate a new (RAID 5) drive on the raid controller, format it and
restore your last backup ...
--
Fabian Arrotin <[EMAIL PROTECTED]>
"Internet network currently down, TCP/IP packets delivered now by
UPS/Fedex ..."
signature.asc
Description: This is a digi
r and Dag didn't yet upload their presentations though.
> I would be very grateful if they did!
>
> Thanks,
> Filipe
Hmmm, let me poke them about that : i've already asked them to upload
their presentations ... ;-)
--
Fabian Arrotin <[EMAIL PROTECTED]>
"Internet
usually better to look that the software requirements prior
to install an OS version
--
Fabian Arrotin <[EMAIL PROTECTED]>
"Internet network currently down, TCP/IP packets delivered now by UPS/Fedex ..."
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
rry
Delmonte pour la conception graphique.
A bientôt sur fr.centos.org !
--
Fabian Arrotin <[EMAIL PROTECTED]>
"Internet network currently down, TCP/IP packets delivered now by
UPS/Fedex ..."
signature.asc
Description: This is a digitally signed message part
__
ure out the config if he can get it installed properly. Right
> now, he's running from source OK, but you all know the arguements for
> source versus rpm.
Everything is included in the Extras repositories .. no need to compile
from source
>
> Thanks for any help. I'll t
o (and the centosplus kernel that has NTFS read
functionnality) or RPMforge ...
Read http://wiki.centos.org/TipsAndTricks/NTFSPartitions for further
informations
--
Fabian Arrotin <[EMAIL PROTECTED]>
"Internet network currently down, TCP/IP packets deliv
d and installed?
vpnc is available in the rpmforge repository .. just yum install it ;-)
If you don't know what rpmforge is , read
http://wiki.centos.org/Repositories and https://rpmrepo.org/RPMforge/
--
Fabian Arrotin <[EMAIL PROTECTED]>
"Internet network
. but they
are still in alpha .. but funny to see that device manager from Windows
reports a 'RHEL scsi disc controller' and a 'RHEL PV nic driver' ... ;-)
--
Fabian Arrotin <[EMAIL PROTECTED]>
"Internet network currently down, TCP/IP packets delivered now b
he same windows on vmware server
(no windows drivers available for xen guests , but vmware service tools,
aka drivers, available for Vmware guests.)
And you need also a processor with VT (Intel) or V-Pacifica (AMD) to
support full-virtualization on Xen
--
Fabian Arrotin <[EMAIL PROTECTED]>
pps are windows apps, you can still try to run these
apps with Wine (or commercial Codeweavers Crossover office) and still
use NX (commercial version from NoMachine.com) or FreeNX (gpl/free and
name will change in the future, but rpms are available in the extras
repo)
--
Fabian Arrotin <[EMAIL
-enablerepo=centosplus ...) by postgresql-libs (for libpq.so.4) and
mysql (for libmysqlclient.so.15) ... but it seems you've excluded some
packages from your centosplus repo config file
Be aware that the newer postfix package needs mysql5 consider this
prior to upgrade !
ain: " + str(ex))
> XendError: Error creating domain: (22, 'Invalid argument')
>
> Any suggestions? Thanks.
I see that you're using x86_64 ... is the CentOS 4.5 iso that you've
downloaded also x86_64 ?
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo &
rror message that you're receiving on the CentOS side ?
If you only see sync message occuring on the ds300 side, this is a
normal behaviour : it will sync after each reboot (btw, it's a shared
storage so it's supposed to be always up and running )
--
Fabian Arrotin <[EMAIL
evice . You can use for example
NetworkManager to automatically configure your network if you have a
laptop ...
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
signature.asc
Description: This is a digitally signe
CentOS 5 ... but easy to rebuild though)
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
signature.asc
Description: This is a digitally signed message part
___
CentOS ma
:49:50 EDT 2007 i686 i686 i386 GNU/Linux
>
It seems you're mixing third-party repositories ... normally RPMForge
will provide dkms while atrpms will provide kmdl ... which repositories
are you using ?
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q
the key from /etc/nxserver/client.id_dsa.key
> which you have to copy out and configure manually in the client. That
> connection is used to start the processes you need and pass the real
> login and password over the already-encrypted connection.
>
Was the following page not u
eady ... :o) (i
pointed you to http://www.arrfab.net/blog/?p=34 before your
holidays )
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
signature.asc
Description:
low the
instructions/doc on http://oss.oracle.com/projects/ocfs2/
Attention : the same page says that it will not work on EL5 with selinux
enabled (sic !) ...
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
sig
Ok, here it is : http://vault.centos.org
But don't forget that on the first `yum update` you'll automatically
jump to 4.5 ...
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
signature.asc
Descr
RH as update 5 is current. It's RHEL 4, plus
> updates all updates to this point.
As noted by Jim , RH still support version 4, but with updates applied
to u5 so 4.5 ...
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlb
/port modes for ftp client.
Depending how you configured your iptables rules, you'll probably anyway
need the ip_conntrack_ftp iptables module.
You can modprobe it, or even better, declare it
in /etc/sysconfig/iptables-config ...
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
e
rted, and put a gpt label on your disk ...
Then you'll be able to use a single ext3 filesystem
>
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
signature
erver (that was not designed to
work with vlans) and of course they point you to esx (aka virtual
infrastructure ... ) ...
But i was answered also that vmware server 2.0 should be released in a
short time ... and that we can expect some newer things ... i hope vmnet
configuration in real-time ...
the `drbdadm -- --overwrite-data-of-peer
primary all` command.
On previous drbd (< 0.8) , the command was : `drbdadm -- --do-what-I-say
primary all` but the command was changed (see the drbd website)
You're right, it's missing from the wiki page and that will be updated
to reflect that .
On Wed, 2007-10-17 at 13:24 -0700, John R Pierce wrote:
> Fabian Arrotin wrote:
> > On the node that will act as a master for the initial full sync (only
> > one time), you'll have to use the `drbdadm -- --overwrite-data-of-peer
> > primary all` command.
> > On pre
the "-"-less strings when you install it :-(
Why don't you use `xm console` instead of using vfb ?
See the link i posted as well for information here regarding 'funny
keyboard' problem in xen DomU : http://bugs.centos.org/view.php?id=2153
--
Fabian Arrotin <[EMAIL
libfreetype.so (as well as libfreetype.so.6) is a symlink to
libfreetype.so.6.3.8 in the same /opt/picassa/lib/ directory ..
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
signature.asc
Descriptio
gt;
hmmm, working on a x86_64 box ?
Have you installed from scratch or have you made an upgrade ? if so,
have you followed this 'manual update' ? :
http://lists.centos.org/pipermail/centos/2007-October/088312.html
Which versions are actually installed and for wh
in /etc/yum/pluginconf.d/fastestmirror.conf
Then update and see it that packages was not left behind after your
upgrade to 5 .. (if that was the case ..)
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
signa
hoping this gets
> to the packager of that rpm.
> Thanks.
> Dave.
Perl-crypt-des is not included in CentOS 5 so you have to see with the
third-party repositories that you use.
RPMForge has perl-Crypt-DES and this one is signed ...
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution
e on the same network, you can make a
local mirror on one of your existing box and point the first box you
want to migrate to this local mirror . At least , you'll see in your
logs when the machine will download stage2.img.
Of course, test the whole procedure in your lan first, and test also
that
thing to do with kernel-xen ... You'll have the same problem
with the standard kernel. Upstream did compile kernels for el5 without
CONFIG_FB_VESA ... so no framebuffer at the console.
See the report on the upstream bugzilla system :
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=2361
listen by default on tcp port 902).
Have you verified your VMware-server rpm ? rpm -V VMware-server
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
signature.asc
Description: This is a digitally signed message pa
ttp://wiki.centos.org/Repositories) , install the ipw2200-firmware
package (through yum install) , rmmod ipw2200 ; modprobe ipw2200 and
this was done ...
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D46
the
srpm from FC6 but don't forget to replace Buildrequire wxGTK2-devel by
wxGTK-devel in the spec file ...
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
signature.asc
Description: T
ntation web page ? it contains
several documents regarding Cluster suite/gfs etc ... :
http://www.centos.org/docs/4/
--
Fabian Arrotin <[EMAIL PROTECTED]>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
signature.asc
Description: Th
ry/project) :-)
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | @arrfab[@fosstodon.org]
OpenPGP_signature.asc
Description: OpenPGP digital signature
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailma
On 10/01/2024 17:11, Fabian Arrotin wrote:
On 10/01/2024 10:49, Kees Bakker via CentOS wrote:
Hi,
At Vagrant Cloud there are "box" images for stream8 and stream9 [1].
At least they are supposed to be there.
The download links on the detail pages, for example for stream9
20230727
k, actually packaged for
EPEL9.
We have successfully imported archives into mailman3 and same for lists
config but let's start a different/separate thread to discuss changes
(like renaming lists, see next coming thread)
Kind Regards,
--
Fabian Arrotin
The CentOS Project | https://www.centos.o
t the cloud provider side that just looks there and import such images ?
I'll let someone from that team answer here though, in case there is a
process I'm not aware of, and not visible from the actual push process :)
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gp
os.org.
If that's not the case, either create an ACO/FAS account that will match
and you'll be then able to "link" your mailman3 account with FAS and so
manage your settings/subscriptions.
If you don't want to, there is always the documented process :
https://docs
know we
took action)
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | @arrfab[@fosstodon.org]
OpenPGP_signature.asc
Description: OpenPGP digital signature
___
CentOS mailing list
CentOS@centos.org
https
sked who would be volunteer and nobody showed up , so it stayed
in that state.
But , hey, welcome to OSS, if you're interested, you can make it happen
, submit patches, etc ;-)
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab
signat
gs
multiple times a week, so I have also a usb microphone, on a desk stand,
that I use for sound input : better sound quality during meetings
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab
signature.asc
Description: OpenPGP digital signature
t kernel and on upper left there is only cursor
(fixed) and nothing happens ..
I'll try to diagnose what's the issue as actually that means troubles
with family using that laptop :)
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab
signat
On 17/06/2020 04:03, Leon Fauster via CentOS wrote:
> Am 16.06.20 um 22:04 schrieb Fabian Arrotin:
>> On 16/06/2020 15:06, Leon Fauster via CentOS wrote:
>>> Hi all,
>>>
>>> I updated a Dell XPS laptop from CentOS 8.1 (1911) to 8.2 (2004).
>>>
>&g
___
>> CentOS mailing list
>> CentOS@centos.org
>> https://lists.centos.org/mailman/listinfo/centos
>
> HandBrake-1.3.3-1.el8 and HandBrake-gui from RPM Fusion work fine on
> CentOS-Stream 8. Haven't tried on CentOS 8.
>
>
stream)
See blog post about the switch:
https://anonbadger.wordpress.com/2020/08/25/why-upstream-ansible-stopped-shipping-rpms/
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab
signature.asc
Description: OpenPGP digital signature
_
splus-tools pkg and so no need to "hack" anaconda
So many ideas, but not enough time to investigate this for now ...
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab
signature.asc
Description: OpenPGP digital signature
ror network.
It's currently being moved to (capped and limited bandwidth)
vault.centos.org and will be removed from mirror.centos.org (and so
external mirrors in the next hours/days).
mirrorlist.centos.org will also (like we do for all
outdated/unmaintained and unsecured releases) start answering &q
On 30/11/2020 13:39, Fabian Arrotin wrote:
> On 30/11/2020 11:18, Manuel Wolfshant wrote:
>> On 11/30/20 10:25 AM, Fabian Arrotin wrote:
>>> On 09/11/2020 14:24, Johnny Hughes wrote:
>>>> All,
>>>>
>>>> This is a friendly reminder.
>
mplain about missing .so file needed for the openpgp functions to
work) ..
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab
signature.asc
Description: OpenPGP digital signature
___
CentOS mailing li
ge here, except if one still manage single box
like in the 90's) ;-)
With my SysAdmin hat on, I'd say that the only real impacting bit is the
shorter lifetime (5y instead of 10), but with overlap between stream
versions, so one would have time to have a look, reflect in automation,
reinsta
d/archived on
https://bugs.centos.org) and not reviewed.
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
uot;forward-looking" solution for other applications in the future.
>
> If XSLT stylesheets are not available - would you suggest another tool? Or,
> would you suggest I design sheets, presumably one for for each data series?
>
I used in the past xmlstarlet (available in epel) for
t if possible.
Talking about that : what's the official position on how CentOS 8 will
go EOL ?
I'd be myself in favor of transparently redirecting CentOS 8 linux
yum/dnf mirrorlists to 8-stream end of the year, so that people would
still get automatically updates and would be able to "d
rview, as our
mirror crawler process validates then each repo for each arch .
So curious about what you mean by "some mirrors are receiving updates
and others are not" ... without giving details :)
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter:
tested and then 8.4.2105
will be announced ;-)
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
figuration (see
https://dnf.readthedocs.io/en/latest/conf_ref.html#options-for-both-main-and-repo)
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab
OpenPGP_signature
Description: OpenPGP digital signature
___
lieve the regression is the result of deprecating lvmetad in favor
of udev event-based activation.
See multiple bugzilla reports open (including one in September) about
some multiple issues all mixed all together :
https://bugzilla.redhat.com/show_bug.cgi?id=2002640
https://bugzilla.redhat
- Toralf
"sudo dnf downgrade iputils" should do it for now
it works when you're back on iputils-20180629-7.el8.x86_64
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab
OpenPGP_signature
Description:
fra still on ansible 2.9.27 from our own configuration
management SIG and ansible-core excluded in yum/dnf to ensure that our
automation still runs fine (until we have time to test/convert all our
roles/tasks/playbooks to run on ansible 5 - aka ansible-core 2.12.x)
--
Fabian Arrotin
The Ce
On 22/02/2022 22:37, Leon Fauster via CentOS wrote:
Am 21.02.22 um 16:24 schrieb Fabian Arrotin:
On 21/02/2022 15:49, Leon Fauster via CentOS wrote:
Hey all, back from vacation and seeing ansible 2.12 in the repos now.
Anything to be aware of when upgrading from 2.9 to 2.12 in CS8?
You'
n why
the CentOS keys had to be re-signed with newer algo too
See this thread :
https://lists.centos.org/pipermail/centos-devel/2022-March/120263.html
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab
OpenPGP_signature
Description: OpenPGP di
On 02/06/2022 00:22, Orion Poplawski wrote:
On 6/1/22 13:43, Fabian Arrotin wrote:
On 01/06/2022 19:51, Orion Poplawski wrote:
Looks like the GPG key we use to sign our RPMs is not longer good with EL9:
# rpm --import RPM-GPG-KEY-nwra
error: RPM-GPG-KEY-nwra: key 1 import failed
gpg key info
er to have automation in place to
configure an application and so replay it on a new node, and then
replicate data
I guess only option why you'd want to not do this is that it's a running
machine that was configured "by hands" by someone who left the company
(and so without au
others)
that would need to be recompiled, so basically rebuilding the whole
distro ...
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab
OpenPGP_signature
Description: OpenPGP digital signature
___
CentOS
(see https://sigs.centos.org/kmods/) as a community project.
They were building it first for Stream 9 and later asked to also build
for/against RHEL9 kernel when it was available (see
https://pagure.io/centos-infra/issue/786)
Kind Regards,
--
Fabian Arrotin
The CentOS Project | https://www.cent
On 21/09/2022 11:51, Fabian Arrotin wrote:
On 21/09/2022 08:32, Thomas Stephen Lee wrote:
Hi,
Is
https://sigs.centos.org/kmods/
a part of RHEL 9?
If yes, what is the repository name?
If not, when can we expect it to be included?
Thanks
---
Lee
No, it's not part of RHEL9 , and it&#x
giving the talk/presentation :)
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab
OpenPGP_signature
Description: OpenPGP digital signature
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/
n your gnome apps menu (it created the needed
.desktop app as shortcut)
I'm using some other apps like this (including OBS-Studio, etc) and it's
a charm ...
Hope it helps :)
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | @arrfab[@fosstodon.org]
tOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
We have one server with a corrupted FS but it was removed from the
origin nodes used by AWS cloudfront
Investigating though ...
--
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | @arrfab[@fosstodon.org]
1 - 100 of 343 matches
Mail list logo
