Server is a Lenovo RV-340 E2420 build 70AB001VUX 8go
Support for Sata-3 6gbps and Raid-5
Did someone can tell if it can handle 6tb hard drives?
--
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo
kind of problem
--
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
For monday this week I began to receive these advice by email from the server;
Wht's the meaning?
Disk read problem or else?
- Kernel Begin
WARNING: Kernel Errors Present
I/O error: dev 08:02, sect...: 4Time(s)
Additional sense indicates
Thank's for the answer,
That's what I was expecting.for the worst.
I will replace it tomorrow morning.
---
Michel Donais
- Original Message -
From: "John R Pierce"
To:
Sent: Wednesday, February 02, 2011 7:53 PM
Subject: Re: [CentOS] kernel errors
> On 0
Get a look at this site;
http://www.spamhaus.org/
It's easy to install, just a line to change in sendmail.
---
Michel Donais___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Did somebody can give me some advises on hardware for building a Centos linux
server?
---
Michel Donais___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
ed recently for an ASUS S775 P5Q-VM G45 PCIE MOTHERBOARD with an
INTEL CORE 2 QUAD Q9550 2.83G/1333/12M/S775 with SATA hard disc no Raid
I doesn't seem to be a server board and I'm not shure of that choice.
---
Michel Donais
___
CentO
I intend to replace fading SCSI drive by a SATA one.
The motherboard is PCI and no SATA controller on board.
So I need a SATA/PCI controller.
Is there something wrong to do this kind of switch?
Some told me that I won't be able to boot that drive.
Loosing part of the SATA interface speed is not
bootable, unless it
> has a boot eeprom on it, and these cost more.
On good point I have to care,
Many thanks
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
e/tightvnc-1.3.10_unixsrc/vnc_unixsrc/Xvnc/programs'
make: *** [all] Error 2
I'm not used to build application,. so I don't understand or don't know
where to find the missing rule
Can somebody point me a solution?
---
Michel Donais
_
> configure the rpmforge repository, then
>
> yum install tightvnc-server
>
Thank's, it worked
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
For a few days I can't boot a server in graphical mode.
The screen goes black and a have a CUI login.
I can login a user and at this point 'startx' get the graphical interface up
in /etc/inittab/
x: 5:respawn: /etc.X11/prefdm -nodaemon
and xdmcp is alivre
On this server we have 12 stations drive
To pass from Centos 5.5 to 5.6 it was easy as an upgrade.
Will it be the same from 5.6 to 6.0 or a full install will be better.
---
Michel Donais___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
de on a
previous one as for 'sendmail', 'sshd.conf','firewalls', etc...
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
> have all your configuration under a change management system, with an at
> least semi-automated installation procedure, such as kickstart.
I nerver think kikstart was I need.
I will check what it is and how it work.
Thank's for the info.
---
Mi
**Unmatched Entries**
gdm[5342]: pam_succeed_if(gdm:auth): error retrieving information about user
gdm[5342]: pam_succeed_if(gdm:auth): error retrieving information about user
gdm[5342]: pam_succeed_if(gdm:auth): error retrieving information about user
9 gdm[5342]: pam_succeed_if(gdm:auth): er
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
s the NFSv4 state recovery directory
NFSD: starting 90-second grace period
--- end dmesg -
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
3/2/11SL - 5/6/11 <--
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
I want to get a look at Cents-6
The computer is a portable Thinkpad T-42
The base OS is Windows XP Professionnal
I tried to use both Microsoft Virtual PC and Oracle Virtual Box with the same
result
I boot from the CD (wich have been burned from an ISO downloaded from a Centos
-6 repo).
The vers
apability so it's
useless.
It won't be a bad thing thatthe install may do a choice of a cpu with or not
the capability of PAE as it was in the past.
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
If I try to start live cd with Virtual box; it say: "no boot medium found
system halted"
---
Michel Donais___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
I restarted the a Centos 5.6 server tonight and I ran in this issue:
I was able to boot.
Then instead of a normal boot with graphical interface the system requested :
'Enter run level'
'INIT'
I typed 5
then I got 'INIT: no more process left in this run level
How can I recover from the situation?
Subject: Re: [CentOS] big problem at boot
>
> On Sat, 2011-09-03 at 22:44 -0400, Michel Donais wrote:
>
>> Then instead of a normal boot with graphical interface the system
>> requested :
>> 'Enter run level'
>> 'INIT'
>> I typed 5
ok on the rest of the surface.
I found a Windows software (sorry) named 'Neucleus Kernel Linux' by
http://www.nucleustechnologies.com/
With it I was able to scan the surface of the disk and recover all my lost
files.
---
Michel Donais
___
>> We are pleased to announce the immediate availability of CentOS-5.7 for
>> i386 and x86_64 Architectures.
Did Centos cr will bring me to 5.7 or should I make a fresh install if I'm
interested bye this level?
---
Michel Donais
_
>> Did Centos cr will bring me to 5.7 or should I make a fresh install if
>> I'm
>> interested bye this level?
>
> Yes, CR will bring you to 5.7.
Thank's
---
Michel Donais
___
CentOS mailing list
CentOS@centos.o
> Finally got a new server the other day.
> You know I had to try out centos 6 with this one.
Can you give me the specs of your server
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
ing I found a software called ' nucleus kernel linux' from
http://www.nucleustechnologies.com/Linux-Data-Recovery-Software.html
On partition 3 I found nearly all my data files and their directories but
were missiing /etc /bin /dev
Hope this help.
--
The computer is an HP Proliant DC7600S.
O/S: Centos 5.7
I try to connect minicom or Hylafax to /dev/ttyS0 and I can't reach the
modem.
Can somebody had this problem and find a solution?
---
Michel Donais
___
CentOS mailing list
CentOS@cento
trying to connect to.
Thank's Keith
I got it working
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
s the source of my problem.
I put it back in palce and it was done.
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Brand new Centos 6.4 installation.
The window manager is Gnome; I tried some trick found on the web to chande
it to KDE without success.
Do somebody can tell me what to do to get KDE working on this installation.
---
Michel Donais
___
CentOS
have an idea to bring them up?
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
nel
ifup
ifup-aliases
ifup-bnep
ifup-eth
ifup-ib
ifup-ippp
ifup-ipv6
ifip-isdn
ifup-plip
ifup-plusb
ifup-post
ifup-ppp
ifup-routes
ifup-sit
ifup-tunnel
ifup-wireless
init.ipv6-global
net.hotplug
network-functions
network.functions-ipv6
But in /etc/network
ack to 5.9 and get a look later for a 6.4 installation.
---
Michel Donais
- Original > Michel, are you trying to change your window manager (gdm
vs kdm) or
> your desktop (gnome vs kde)?
>
> If you are trying to change your desktop, then Craig's suggestion would
> wor
> On Wed, 24 Apr 2013 07:50:38 -0400
> Michel Donais wrote:
>
>> > What do you have in /etc/sysconfig/network-scripts?
>
>> ifcfg-eth0
>> ifcfg-eth1
>
> What are the contents of these tegining;
The content of these two files was the same as in my 5.9 serv
Do somebody have experience wiit a Dell Poweredge 2950 Xeon quad 2.5 with
Centos 6.4
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Using Firefox 24.3.0 in Centos 5.10 (kernel: 2.6.18-371.3.1.el5xen
This message fill the logs:
4gb seg fixup, process firefox (PID31086), cs:IP73::0805bf49 print K;
message suppressed
Do somebody experienced this problem?
---
Michel Donais
omatic
yum updte of three programs ; java 1.6. kpartx and device-mapper-multipath.
I don't know if there is a relation or do I face a kind of virus?
I hope somebody can help
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists
13.76 hours sooner wich
mean this process was created round 17:45 monday at the end of the
afternoon.
Strange situation
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Is it possible to think it may appen.
Or is it possible to run Centos & in VM over Centos 6 32 bits?
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
> You need a 64 bit host to run a 64 bit guest; so no, that won't work.
Thank's to confirm
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Is there a former version of CentOs working under Linux Kerbnel 2.2?
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
O/S: centos 5.11 fresh install and updated this week.
Postfix: most recent yum update this week
Postfix is set-up to work but do not answer to 'helo'; but sendmail can.
I do not have this situation in 5.4
Do somebody can figure out where I'm wrong?
-
_0 = 1024.x768
X_MODE_1 = 1280x1024
X_MODE_2 = 1440x900
#
[ws101]
MODULE_01= usb-uhci
MODULE_02= printer
PRINTER_0_TYPE = U
PRINTER_0-_DEVICE = /dev/usb/lp0
#PRINTER_0_PORT = 9100
-----
Michel Donais
a for a solution
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
> On 05/05/2012 03:44 AM, Michel Donais wrote:
>> For some times I'm loosing graphical applications usage
>> as pirut and system-config-users,
>> Yum auto update is not working too but I can update with command lin yum
>> update
>>
>> Versions instlal
-CentOS-default Python version?
Where should be default python
Packages are only installed by yum update usually CR but I also have some
updates been made from epel but can't remember wich
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
> Try "yum reinstall libuser", or "yum install libuser"
I already tried it with no results
actual re-installed version is
libuser.i386 0:0.54.7-2.1.el5_5.2
I also have the same problem with graphical version of service
---
Michel Donais
___
"", line 1
inport libuser
^
SyntaxError: invalid syntax
>>>
>>>
>>> print(sys.path)
Traceback (most recent call last):
File "", line 1, in ?
NameError: name 'sys' is not defined
>>>
I think we are near a solution
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
oot]$ >>> print (sys.path)
bash: syntax error near unexpected token `>'
[michel@serveur root]$ Traceback (most recent call last):
bash: syntax error near unexpected token `most'
[michel@serveur root]$ File "", line 1, in ?
bash: File: command not found
[michel@ser
#x27;,
'/usr/lib/python2.4/site-packages/gtk-2.0']
If I refer at Larry Martell message, he pointed that the problem was with
sys.path
If I look in ?usr/lib/python2.4/site-packages/
numeric in there on the test machine but absent on the production one
I tried to re-install p
LTO-4-ultrium-4-restore.htm
http://www.krollontrack.com/data-recovery/data-recovery-services/tape-recovery/
Hope it help
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Why in 6.3 they move OpenOffice to LibreOffice?
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
y system
rpm is at level 4.4.2.3-28.el5_8
rpm froge-release is 0.5.2-2.el5.rf
rpm-libs is at level 4.4.2.3-28.el5_8
I googled out all the afternoon without finding a solution to my problem.
I can't find a place to get rpmlibs(PayloadIsLzma)
Thank's in advence to care my request
' just to be uncompressed?
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
nd archives and indexes the contents of every transmission, in and
> out.
Thank's James,
Did AvantFax a commercial or a free solution?
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Many thank's Frank, James and Leonard for your help.
---
Michel Donais
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
59 matches
Mail list logo
