Canon has official Linux Support too (albeit they are somewhat outdated
11/2012 - I remember that I recently had to backport some old and
deprecated packages in Ubuntu 14 for a related Pixma because of
dependencies):
http://www.canon.de/Support/Consumer_Products/products/Fax__Multifunctionals
Dear Centos Users
We were wondering how can we change the default policy of numactl.
In other words, our cluster has 10 servers, each server has two nodes, and
each node has 16 cores.
Recently, we observed a poor performance of our cluster when a couple of
jobs run on the same server. By
Dear Centos Users
We are running centos on our HPC.
Indeed, we have a problem with running some software using X11 server such
as pymol. For your information, we are using cygwin to access to the
hpc (using ssh -X -Y usern...@xxx.xxx.xxx.xxx)
When we are testing glxinfo on my desktop, it gives us
Hi,
I was compiling a new version of bind on my centos 4.6 server and I
discovered that the openssl version (openssl-0.9.7a-43.17.el4_6.1) has
several exploits associated with it.
I was wondering aside from removing the RPM and compiling a new version of
openssl how can I upgrade my current
Behalf Of Alex White
P.A > Sent: Friday, February 01, 2008 1:13 PM
P.A > To: CentOS mailing list
P.A > Subject: Re: [CentOS] centos 4.6 and openssl
P.A >
P.A > On Fri, 1 Feb 2008 12:49:10 -0500
P.A > "Paul A" <[EMAIL PROTECTED]> took out a #2 pencil and scr
I guess I can use the bind-chroot rpm, ill give that a shot
Thanks,
paul
P.A > -Original Message-
P.A > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
P.A > Behalf Of Jim Perrin
P.A > Sent: Tuesday, February 19, 2008 10:47 AM
P.A > To: CentOS mailing list
P.A > Su
Hi I recently compliled Bind 9.4.2 on
CentOS release 5 (Final) 2.6.18-53.1.13.el5 #1 SMP
I compiled named chroot, I have done this on several other centos 4 server
with no issues however on this centos 5 server im seeing
[EMAIL PROTECTED] named]# service named status
named dead but subsys lock
What does /var/log/messages tell you? Most likely it's a named.conf issue.
Thanks,
Paul
_
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of ???
Sent: Wednesday, February 20, 2008 2:22 PM
To: centos@centos.org
Subject: [CentOS] BIND.named failed to
> then manually installing/configuring dovecot/postfix/mysql etc. Not
>> sure if I can create a bootable ISO that will install on new servers
>> or what my options are. I would appreciate any suggestions.
>
>We use Kickstart.
>
>You can build a customised Kisckstart script to i
gt; I prefer backup schemes that use dump/restore to do occasional full and
> regular incremental backups, and for these, NFS is quite useful.
Not quite as simple as a dump restore, but duplicity works beatifully for
point in time backups...
Peter.
--
Censorship: noun, circa 1591. a: Relie
Hi originally I installed php 4 on centos 5.5 and then a few repos including
the remi repo to upgrade to php5, which seems to upgrade/work without any
issues.
However when I make a change to the /etc/php.ini file it doesn't look like
apache is seeing it, for example if I change the post_max
Keith/guys thanks for the suggestions, here is what I have found. It shows
loaded config file is /etc/php.ini but if I remove that file and restart
apache it still works. I also did as Keith suggested I removed a comment ';'
and I got no errors apache started and it loaded the /etc/ph
2 and php 5.2
On Wed, 16 Feb 2011, Paul A wrote:
> To: 'CentOS mailing list'
> From: Paul A
> Subject: Re: [CentOS] apache 2 and php 5.2
>
> Keith/guys thanks for the suggestions, here is what I have
> found. It shows loaded config file is /etc/php.ini but if
>
On Sunday, March 06, 2011 05:28:13 pm John R Pierce wrote:
> On 03/06/11 5:50 AM, Pasi Kärkkäinen wrote:
> > It's kind of funny since OracleVM*is* Xen, and it's counted as
> > "hardware partitioning" :)
>
> OracleVM(tm) is a brand name now, being us
I'm trying to setup the Janrain implementation of OpenID in a dev box
running CentOS 5.5. The detect.php script is telling me, "Your web server
seems to corrupt queries. Received , expected a=%26b.
Check for mod_encoding." Does anyone know what package provide
ailed"?
>
> This was done on a trailling basis for a couple side arch's
> builders by me and another. It turns out to be a lot of
> chatter and 'noise', and not much 'signal'
Very true but, at least in my experience, signal doesn't matter in such a cas
packages instead of regular tuples. Hrmph, PostgreSQL
> BLOB/bytea support is good enough to serve packages out of, now. A
> reader will always get consistent data in an MVCC scheme.
You wouldn't want to store the actual packages in the DB though... Instead,
you'd store pat
On Monday, April 11, 2011 10:12:15 PM Antaryami Khuda wrote:
> I see um twitter dag's want to start his own RHEL rebuild.
>
> Dag how much monies you do need?
>
> I make contribution of 5.000 rupee if other join.
>
> Ant
This is really disrespectful to talk about on
y for certain Dell
> > servers ATM.
> >
> > But, yes, a different way of looking at NICs is coming down the pipe.
> > It's about time.
>
> EGADS Why? After working with FreeBSD for ten years it so nice not to have
> to worry is this rl0, vr0, em0, fxp0, bge0
Cut'n'paste from a tutorial I'm writing right now:
Check with lsof if there are any very large files that are already deleted but
are still open by some processes.
# df -h .
FilesystemSize Used Avail Use% Mounted on
/dev/md0 194M 32M 153M 18% /bo
> Can anyone provide advice on how to bring up networking in Single User
> Mode?
>
> I need to specify an IP, mask, gateway and bring up the adaptor so I
> can ssh into another machine to transfer files to it.
# service network start ?
___
CentOS
On Sunday 18 October 2009 10:53:07 Neil Aggarwal wrote:
> It then gives me instructions for AMD revision F CPUs.
> I did a search and did not find anything that seems relevant
> to revision F. The only stuff I am finding is talking about
> socket F. Is that the same things as a Soc
On Tuesday 29 December 2009 17:13:52 Slack-Moehrle wrote:
> My 12 year old wants to learn more about servers and has memorized a lot of
> commands like ls, chmod, du, etc. He wants to have his own domain and
> server on the web and I have enough Static IP's, so why not foster th
Jason,
5 will run solaris 10 with a few initial issues. You may have to install 8 or
9 first and then do a firmware upgrade to get 10 to boot for installation.
Also,
512MB max will restrict you in what you can do. ZfS boot is possible but slow
and in general use, you want to reduce the size
On Tuesday 29 December 2009 18:11:51 John R Pierce wrote:
> Slack-Moehrle wrote:
> > My 12 year old wants to learn more about servers and has memorized a lot
> > of commands like ls, chmod, du, etc. He wants to have his own domain and
> > server on the web and I have enough St
> OH, and I just remembered. the Ultra 10 uses the same memory board, but
> has a little more room in the chassis, and supports 4 x 256MB tall dimms
> of the right type, for 1GB.you can get away with this in hte U5 by
> hacking a bit on the inside.catch is, the low profile 2
12:43 AM, John R Pierce wrote:
> > > Rafa? Radecki wrote:
> > >> Hi All.
> > >>
> > >> I plan to use virtualization in my production environment. I plan to
> > >> use one of the following options:
> > >> - KVM;
> > >> - V
I will be out of the office starting 05/28/2008 and will not return until
05/29/2008.
prova
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
I've been trying to create a Linux distribution based on CentOS 5, similar
to (actually, exactly like) how CentOS is based on RHEL. I have been unable
to find any information about this. Most of what I find are tutorials and
instructions on using Kickstart. Sometimes I've found allusion
I need to disable / stop X from running on a remote server, to which I
only have SSH access, and I have never done this before. So, can
someone please tell me how todo it?
telinit 3
If you need the server to stay at runlevel 3 after a reboot
change id:5:initdefault: to id:3:initdefault: in
i installed Cent OS 5.1 on a INtel P4 PC.
it got installed successfully. Upto the login prompt the mouse cursor
appears on the screen. then cursor disappers. i we move the mouse. the
cursor movement is felt when it is on a icon or when right click is done
but the cursor is
hard questions or are my questions just not
P.A > clear?
P.A > >> There has to be others on this list that are running nameservers
P.A > via
P.A > >> CentOS. This seems to be a nasty issue that we who are running bind
P.A > need
P.A > >> to get right.
P.A > >>
On 02/02/12 14:05, Mike wrote:
> On Thu, 2 Feb 2012, William Warren wrote:
>
>> On 2/2/2012 1:19 PM, Matt wrote:
>>> Has anyone installed a high I/O application such as an email server on
>>> SSD drives? Was thinking about doing two SSD's in RAID1. It would
&g
On 02/02/12 17:01, William Warren wrote:
> On 2/2/2012 2:15 PM, Peter A wrote:
>> If you're worried about io reliability, then buy a (way more expensive)
>> SLC drive, rather than the consumer level MLC... We have some SLC drives
>> here that from their manufacturer ha
> > Not sure when it stopped working as I don't use it often. Maybe since the
> > upgrade from 5.2 to 5.3. Can't say for sure as it's been a while since
> > tried to start X.
> >
> > The errors I receive when startin X are:
> >
> > (
> Hello Johan,
>
> thanks but i know that. I just want keep im my system packages x86_64. Why
> yum return packages i386 when $basearch is x86_64?
>
> Regards,
> ---
> Eduardo Silvestre
> nfsi telecom, lda.
>
> eduardo.silves...@nfsi.pt
> Tel. (+351) 21 949 2300 - Fax (+351) 21 949 2301
> http
This is because you have the following rules declared:
-A RH-Firewall-1-INPUT -i eth0 -j ACCEPT
-A RH-Firewall-1-INPUT -i eth1 -j ACCEPT
You should not use these rules because iptables will mark this traffic as
valid and will not even try to match any rule defined later in the table. If
you want
I'm trying to avoid typing every password manually. I just need an
> > script that makes the job.
> >
> > useradd creates the account but still need to setup accpunt's password.
> >
>
> from 'man passwd'
>
> --stdin
>
en pinging localhost. The problem shows up several hours
after the system reboot.
Any ideas on what might be wrong and how to fix this
on a running system?
Are there any current plans to integrate MRG Realtime
into CentOS project?
Thank you,
Sasha
le at
ftp://ftp.redhat.com/pub/redhat/linux/enterprise/5Server/en/RHEMRG/SRPMS
as been mentioned by Johnny Hughes in a number of threads.
Regards,
Sasha
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
> I've recently switched to the latest rt kernel
> available from http://people.centos.org/hughesjr/kernel-rt
> And one of the two problems I'm having with this new kernel
> is that the logs have been flooded with nagios alerts
> which indicate high percentage (50-60) of packet loss
> when pinging
Hi,
In the course of my experiments with rt kernels
it so happens that the gui versions of tuna built
from upstream (RHEL, F11) SRPMs show wrong affinity settings
for IRQ threads.
Where would be a proper place to report this
and get some help on other rt-related issues?
Thanks,
Sasha
> # cat /etc/my.cnf
> [mysqld]
> datadir=/var/lib/mysql
> socket=/var/lib/mysql/mysql.sock
> user=mysql
> # Default to using old password format for compatibility with mysql 3.x
> # clients (those using the mysqlclient10 compatibility package).
> old_passwords=1
> max_allowed_packet=2MB
>
> [mysql
aves different (the way I had in mind): after a relabel thru
> ./autorelabel, all the files & directories I create under /var return to
> var_t
> (if there's no override in file_contexts.local).
>
> In CentOS 5.3, If I manually change from var_t to something else, when I
> In the course of my experiments with rt kernels
> it so happens that the gui versions of tuna built
> from upstream (RHEL, F11) SRPMs show wrong affinity settings
> for IRQ threads.
It wasn't actually a tuna bug but rather misunderstanding on my part.
When tuna-0.8.4-1 gui is
> Yesterday I installed pam_shield and followed the testing suggested and
> thought all was well.
> today I find that I cannot get to my email account, I can login via ssh
> okay (uses keys) but su and sudo give
> segmentation faults. I am guessing due to the pam module causing a
gmentation faults. I am guessing due to the pam module causing a problem.
> >> As I cannot do remote login as root and sudo and su use pam I appear to
> >> have
> >> locked myself out.
> >>
> >
> > I have not encountered this issue. And I hav
t su and sudo give
> >>>> segmentation faults. I am guessing due to the pam module causing a
> >>>> problem.
> >>>> As I cannot do remote login as root and sudo and su use pam I appear to
> >>>> have
> >>>> locked myself o
> > > I've tried that too and it was a good suggestion
> > > as su now crashes only if you enter a wrong password.
> > > I've also tried to rebuild rpmforge srpm with no luck.
> > > Could you really make this thing work? I mean did it
> > >
Why today logrotate is not happen and Where can i verify the Logrotate
state
The logs are not necessarily rotated every day.
The default in /etc/logrotate.conf is weekly.
Look in /etc/logrotate.d for specific log rotation settings.
HTH
___
CentOS mail
> Copy To Win2K AFP SMB NFS
> 1m40.053s 0m22.566s 0m23.817s 2m11.849s
>
> Copy From Win2K AFP SMB NFS
> 1m34.478s 0m20.709s 0m20.823s 0m23.487s
>
> NFS read performance was slightly slower than AFP/SMB but the write
&g
Not sure if this is off topic but I installed freeradius with yum on centos
5 and I'm hoping someone has some advice on getting DNIS proxy working
In the acct_users file I have
DEFAULT Called-Station-Id == "5500", Proxy-To-Realm := "xxx"
Fall-Through = yes
In the proxy file I have
r
> I hope someone can help me with this b/c I'm stumped... I had set up
> an svn repository a while ago with an apache/webdav front end using
> the default centos packages. For some reason this morning it stopped
> working for me - it would give me a 403 error. I suppose the
> Hi all, I've installed CentOS 5.2 on a sun x2250.
> The installer goes fine and I can setup my root with lvm on /dev/
> mapper/isw__Volume0, that is the hardware RAID1 for two disks
> available.
> As the system boots lvm complains of a duplicate PV and decides to
> Fully up-to-date CentOS 5.2 and Firefox browser. A previous thread had a
> problem with plugins disappearing. I've discovered, by accident, a
> causal relationship.
>
> Running a Thunderbird mail client (could happen with others? Haven't
> tested with Evolution yet
Michael A. Peters wrote:
> For video - I use the totem plugin with xine backend totem. I
> compiled
> my own but I suspect that rpmforge has it. I found gstreamer backend
> totem to be most unsatisfactory.
Hi guys,
Could you please share some details on
how to get totem-xine runni
> > Awhile ago I've tried to rebuild fc6 totem-xine in mock
> > but stopped short due to a large number of dependencies
> > as I wasn't sure of the result.
>
> livna for FC6 is the totem-xine I'm using, I built all the dependencies
> from Fedora/li
gt; how to get totem-xine running on CentOS?
> >
> > I believe this could be interesting to a number of people
> > on the list, not just me.
> >
> > Awhile ago I've tried to rebuild fc6 totem-xine in mock
> > but stopped short due to a large number of depende
> >>> Awhile ago I've tried to rebuild fc6 totem-xine in mock
> >>> but stopped short due to a large number of dependencies
> >>> as I wasn't sure of the result.
> >> livna for FC6 is the totem-xine I'm using, I built all the dependenc
I have a number of vhosts configured with SuexecUserGroup
to run the scripts with limited privileges and the dept. web-site on one
of them. The problem is the webmaster can't read online context help
which comes with the cms the site is using. Most help files (>2K) have
*.php.html extensio
> I have a number of vhosts configured with SuexecUserGroup
> to run the scripts with limited privileges and the dept. web-site on one
> of them. The problem is the webmaster can't read online context help
> which comes with the cms the site is using. Most help files (>2
> But, I shutdown Kerio and config MTA = sendmail.
> Then
> # service sendmail start
> # hostname
> mail.domain11.com
> # echo "test " | mail -s "test mail" some...@domain22.com
>
>
> I received is r...@mail.domain11.com
>
> HOW?
With sendmail try to remove root from EXPOSED_USER list.
_
> Hi, I have two very similar AMD based work stations running fully
> current CentOS x86_64.
> Both have 4Gb of RAM, both have
>
> [rkam...@media ~]$ sudo rpm -qa |grep flash
> flash-plugin-10.0.22.87-release.i386
> [rkam...@media ~]$ sudo rpm -qa |grep fire
> firefox-3.0.6-1.el5.centos.i386
Try
> >> Hi, I have two very similar AMD based work stations running fully
> >> current CentOS x86_64.
> >> Both have 4Gb of RAM, both have
> >>
> >> [rkam...@media ~]$ sudo rpm -qa |grep flash
> >> flash-plugin-10.0.22.87-release.i386
> >> [rkam...@media ~]$ sudo rpm -qa |grep fire
> >> firefox-3.0.
> Hi, I have two very similar AMD based work stations running fully
> current CentOS x86_64.
> Both have 4Gb of RAM, both have
>
> [rkam...@media ~]$ sudo rpm -qa |grep flash
> flash-plugin-10.0.22.87-release.i386
> [rkam...@media ~]$ sudo rpm -qa |grep fire
> >>
Hi, I was searching for the system wide bash_logout and couldn't find any
documentation on it.
If I create a file ~/.bash_logout file it gets executed when the user logs
out but when I create a system wide /etc/bash_logout it doesn't work.
Not what the issue is since I couldn't f
and couldn't find any
> documentation on it.
There is no system wide bash_logout, according to the bash man page,
CentOS 4.7.
Instead look at the way a system wide bashrc is included in ~/.bashrc:
[ -f /etc/bashrc ] && . /etc/bashrc
You could do the same in ~/.bash_l
> Does anyone know of a howto on setting up raid1 on CentOS 5.x 64 bit?
You may try section 5.1. Creating the RAID Partitions
in RHEL Deployment Guide.
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
> > Updated yesterday to the latest firefox from CentOS, and now RPMforge
> > flash-plugin will only play a few seconds of video (such as CNN,
> > iReport, etc.) at a time before becoming stuck; dragging the slider
> > back a little allows it to play a bit further, but
Hi, I'm currently using, CentOS release 4.8 (Final) and wanted to update the
pam_tally module to support unlock_time.
I understand this is only support on centos 5.x and up. What are my options
for updating pam_tally to support unlock_time, can I simply download and
update from a centos re
Just notice that version of pam comes with pam_tally2 which supports what I
want fyi.
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf
Of Paul A
Sent: Tuesday, July 05, 2011 4:47 PM
To: centos@centos.org
Subject: [CentOS] pam update
Hi, I'm currently
> CentOS 5.4 64-bit with SELinux, happily running for over a year, suddenly
> httpd fails to start up, getting an error message like:
>
> Starting httpd: Syntax error on line X of /etc/httpd/conf.d/php.conf:
> Cannot load /etc/httpd/modules/libphp5.so into server: libxml2.so.2:
I have been getting the following error when trying to run ldconfig:
ldconfig: /usr/lib64/libfreebl3.so is not a symbolic link
# ll /usr/lib64/libfreebl3.so
-rwxr-xr-x 1 root root 312336 Mar 28 11:13 /usr/lib64/libfreebl3.so
I've used "yum whatprovides /usr/lib64/libfreeb13.so&quo
That did not work. It fact, i got the following message during the yum
reinstall process:
/sbin/ldconfig: /usr/lib64/libfreebl3.so is not a symbolic link
On Tue, May 11, 2010 at 7:39 PM, Dominik Zyla wrote:
> On Tue, May 11, 2010 at 07:22:05PM -0400, a arias wrote:
> > I have been ge
?
Thanks,
On Tue, May 11, 2010 at 8:12 PM, Dominik Zyla wrote:
> On Tue, May 11, 2010 at 07:50:05PM -0400, a arias wrote:
> > That did not work. It fact, i got the following message during the yum
> > reinstall process:
> >
> > /sbin/ldconfig: /usr/lib64/libfreebl
putation efficiency is so much higher.
Thank you, I was just going to post something very similar. I recently
upgraded from a system with an Atom to an Ivy Bridge i3-3220. The system
is mostly idle but is used for a small webserver, grabs images from a
webcam once a minute and is used as
Hi,
I use vault.centos.org::centos-full-store to rsync few repositories from
vault.
Recently I started getting @ERROR: Unknown module 'centos-full-store'
Has something changed?
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/lis
I have an old dell 2450 that was running kernel 2.6.18-308.1.1.el5 I then
upgraded it via yum to 2.6.18-308.1.1.el5. Now when the server boots to the
new kernel, 2.6.18-308.1.1.el5 it hangs on "starting iSCSI" and the weird
thing is when I tried to switch back to the older 2.6.18-308.1.1.el5 kernel
e issue
On Fri, Apr 13, 2012 at 12:19 PM, Paul A wrote:
> I have an old dell 2450 that was running kernel 2.6.18-308.1.1.el5 I
> then upgraded it via yum to 2.6.18-308.1.1.el5. Now when the server
> boots to the new kernel, 2.6.18-308.1.1.el5 it hangs on "starting
> iSCSI" a
read_helper+0x7/0x10
Apr 13 15:21:31 bakup kernel: ===
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf
Of Dale Dellutri
Sent: Friday, April 13, 2012 3:07 PM
To: CentOS mailing list
Subject: Re: [CentOS] upgrade issue
On
: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf
Of m.r...@5-cent.us
Sent: Friday, April 13, 2012 3:31 PM
To: CentOS mailing list
Subject: Re: [CentOS] upgrade issue
Paul A wrote:
> Dale, I disabled it and the server came up but im seeing all sorts of
> kernel error
ntos.org [mailto:centos-boun...@centos.org] On Behalf
Of Paul A
Sent: Friday, April 13, 2012 3:41 PM
To: 'CentOS mailing list'
Subject: Re: [CentOS] upgrade issue
Mark, I used the centos repos, this server has centos 5.8.
Iscsi will work on my previous kernel but not on the new one. I wanted
re, how do
you guys recommend I go about installing ip6tables. I guess I could upgrade
the server from 4.9 to 5.x but I heard this could cause issues with things
already installed and I have never done an upgrade like this. This is a
server running chroot bind compiled manually. My other option is to
Thanks, I completely forgot about this.
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf
Of John Doe
Sent: Wednesday, August 01, 2012 11:33 AM
To: CentOS mailing list
Subject: Re: [CentOS] centos 4.9 + ip6tables
From: Paul A
> Hi I have
The following source rpms are missing from vault.centos.org:
1) openmotif-2.3.1-6.1.el5_8.src.rpm
This should be present under http://vault.centos.org/5.8/updates/SRPMS/
The corresponding binary rpm is
http://mirror.centos.org/centos/5.8/updates/x86_64/RPMS/openmotif-2.3.1-6.1.el5_8.x86_64.rpm
2)
Thanks Johnny.
On Wed, Oct 24, 2012 at 7:52 AM, Johnny Hughes wrote:
> On 10/24/2012 09:39 AM, Johnny Hughes wrote:
> > On 10/23/2012 11:38 PM, a j wrote:
> >> The following source rpms are missing from vault.centos.org:
> >>
> >> 1) openmotif-2.3.1-6.1.el5_8
I just tried to perform a yum upgrade on my CentOS 5 machine and it
failed on a pm-utils >= 0.99.3-6 is needed by package hal error. I
rsync my repos every night. This is the first time it's happened
sudo yum -y upgrade
Loading "installonlyn" plugin
Loading "priori
Akemi Yagi wrote:
No, you are not an idiot. If you look through the forum thread I
referred to, you'd find that "smart" people went though the same
thing. And I know, for a fact, they are smart. :-)
Akemi
___
CentOS mailing list
Ce
Karanbir Singh wrote:
if you are rsync'ing againt the /5/ target, your [base] repo should have
updated as well, was that not the case ?
I don't rsync everything, I use the ISOs for base and just rsync addons,
extras, updates, etc as well as some 3rd party repositories. I'm still
waiting on one
Akemi Yagi wrote:
On Dec 6, 2007 4:51 PM, Karanbir Singh <[EMAIL PROTECTED]> wrote:
James A. Peltier wrote:
I just tried to perform a yum upgrade on my CentOS 5 machine and it
failed on a pm-utils >= 0.99.3-6 is needed by package hal error. I
rsync my repos every night. This is
James A. Peltier wrote:
Thanks. Having a look at
http://mirror.centos.org/centos/5/updates/i386/RPMS/ there is indeed no
pm-utils matching that version.
Replying to my own post here. I'm an idiot. The ISO files I have are
for 5.0 and the updates I have are for 5.1 I don't hav
Kai Schaetzl wrote:
I have a local mirror of CentOS5 base and updates. Now with 5 having
become 5.1 and in case I just want to keep on updating (at the moment) is
it enough that I update the mirror of updates or do I also need an update
of the base repo?
Kai
I loop automount the 5.1 isos
Ray Van Dolson wrote:
Hi all, we're trying to install CentOS 5.1 on a Sun Ultra 40. This is
an AMD-powered machine and we're using the x86_64 version of CentOS
5.1. The machine is using the NVidia CK804 chipset and has SATA disks.
It also has 16GB's of memory which prompted us
Ray Van Dolson wrote:
Try booting while disabling ACPI and APIC.
linux noapic noacpi
at the boot menu.
We'll give that a try.
In addition, error message output:
An error occurred trying to format VolGroup00/LogVol00. This problem is
serious, and the install cannot continue.
Pres
CentOS 5 on my laptop, and built a bunch of packages,
making "yet another" repo for CentOS.
These are primarily straight rebuilds (in mock) of Fedora 8 source rpm's
- taking care to avoid anything that conflicts with or replaces CentOS
packages.
I know there are a dozen or so addo
oth Windows And Linux.
>
> Mail server is running Ms Exchange.
I would use Outlook for the Windows clients if the server is running
Exchange.
I don't think there is a OSS solution that runs well on all platforms.
Evolution may work for your Linux clients, but I don't think it has ful
Ray Van Dolson wrote:
Hi all, for anyone interested in following this -- ended up having the
same issue with RHEL 5.1 and opened a bug (and support request):
https://bugzilla.redhat.com/show_bug.cgi?id=420361
Ray
___
CentOS mailing list
CentOS
ctly.
Everything is all fine and dandy until it gets about 50% way through
formatting and then throws the ATA errors. When booting rescue with 5.1
I am able to format the already created LVM volume without issue,
however it fails with the same errors mentioned when kickstarted.
I just perfor
in recent upstream releases).
* autofs5 is included in this release as a Technology Preview. This new
version of autofs resolves several long-standing interoperability issues
in multi-vendor environments.
* There is a technology preview of OpenOffice-2.0 included in the
updates directory. You
Sorry all, my mind was obviously not where it should have been this
morning. What I meant to say is, there will still be a CentOS 5.1 for
IA64 coming soon too, right?
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo
1 - 100 of 1048 matches
Mail list logo
