On 30.11.2020 13:55, Jonathan Billings wrote:
On Nov 30, 2020, at 02:35, Nicolas Kovacs wrote:
* /dev/sda1: 500 MB /boot ext2
* /dev/sda2: 55 GB / ext4
* /dev/sda3: 4 GB swap
Now, SSDs don’t have the same physical characteristics, so it doesn’t matter.
Also, cloud storage and virtual m
Hello,
I have a VPS at a hoster where I got 3 /64 ipv6 prefixes/subnets, that
are routed;
one for the VPS itself - let us call this srvprefix
one for the tunnel, only ::1 (server side) and ::2 (home side) are used
- let us call this tunnelprefix
and one for my network at home - let us call
On 02.12.2020 09:16, Roberto Ragusa wrote:
On 12/1/20 8:39 PM, Walter H. wrote:
I have a VPS at a hoster where I got 3 /64 ipv6 prefixes/subnets,
that are routed;
one for the VPS itself - let us call this srvprefix
one for the tunnel, only ::1 (server side) and ::2 (home side) are
used
Hello,
can someone explain, why the two packages
- GeoIP
- geoipupdate
are needed when installing the bind-utils package?
yum install bind-utils
...
Package
On 08.12.2020 14:44, Jonathan Billings wrote:
On Tue, Dec 08, 2020 at 02:33:01PM +0100, Walter H. wrote:
can someone explain, why the two packages
- GeoIP
- geoipupdate
are needed when installing the bind-utils package?
The bind-utils package requires 'libGeoIP.so.1()(64bit)'
On 08.12.2020 15:12, Jonathan Billings wrote:
On Tue, Dec 08, 2020 at 02:54:03PM +0100, Walter H. wrote:
Yes, then the interesting question, how can I make use of these
GeoIP-features when
doing these e.g.
nslookup 200:470:17:55::1
nslookup 222.10.10.1
nslookup www.centos.org
host
Hello,
I just tried installing a VM from the stream ISO and it worked;
the only thing I would like to have changed as a default config is
GRUB_CMDLINE_LINUX=" net.ifnames=0 ..."
the reason, I find eth0, eth1, eth2 easier to use than cryptic names
like ens33 or ens0p3 or so;
Walter
p.s.
On 09.12.2020 15:45, Johnny Hughes wrote:
On 12/9/20 8:41 AM, Walter H. wrote:
p.s. can someone tell in as short as possible what this CentOS Stream is
in comparison to CentOS 8?
CentOS Stream is built from the currently released RHEL Source Code + 0.1
So if RHEL 8.3 is released .. Stream is
On 09.12.2020 18:12, Johnny Hughes wrote:
On 12/9/20 11:01 AM, Walter H. wrote:
On 09.12.2020 15:45, Johnny Hughes wrote:
On 12/9/20 8:41 AM, Walter H. wrote:
p.s. can someone tell in as short as possible what this CentOS Stream is
in comparison to CentOS 8?
CentOS Stream is built from the
Hello,
when someone has installed a CentOS 7.1 in the past,
and did 'yum update' regularily, his/she got a CentOS 7.8 now without
any reinstallation procedure or other complications;
when the same wanted to update to CentOS 8 he/she had to do a new install;
what happens to CentOS Stream?
wh
On 11.12.2020 19:19, Gordon Messmer wrote:
On 12/10/20 2:53 PM, edward via CentOS wrote:
after reading some info on centos stream is a rolling release. i'm
wondering applying
It's not a "rolling release" in the most commonly used sense. There
just isn't a minor number for releases. CentOS
Why?
it is called "rolling release" and no one gave officially a statement to
the question I asked,
if it is meant like that of Win10 ...
a beta release is not the same that many expect as a stable system, as
they are used to have with CentOS;
you should think of renaming CentOS to somethi
On 14.12.2020 13:07, Nicolas Kovacs wrote:
Hi,
Here's an interesting read which makes a point for CentOS Stream:
https://freedomben.medium.com/centos-is-not-dead-please-stop-saying-it-is-at-least-until-you-read-this-4b26b5c44877
tl;dr: Communication about Stream was BAD, but Stream itself migh
Hello,
on my tunnel end I habe configured this:
in /etc/sysconfig/network-scripts/ifcfg-eth0 I added this
IPV6INIT=yes
IPV6ADDR=lan-prefix::1
IPV6ADDR_SECONDARIES="fe80::1"
IPV6_AUTOCONF=no
IPV6_ROUTER=yes
/etc/sysconfig/network-scripts/ifcfg-sit1 is this
TYPE=SIT
NAME=sit1
ONBOOT=yes
DEVICE
If I were you,
I'd do the 2nd ... use a larger SSD (1 TB), and keep the mirror set
(raid 1) for /data
Walter
On 26.12.2020 21:20, Nicolas Kovacs wrote:
Hi,
My workstation is currently equipped with a pair of Western Digital Red 1 TB
SATA disks in a software RAID 1 setup.
Some stuff like work
is that what you expect to find?
https://access.redhat.com/errata/RHSA-2021:0227
On 27.01.2021 08:38, Gionatan Danti wrote:
Hi all,
do you know if a fix for sudo CVE-2021-3156 is available for CentOS 6?
While CentOS 6 is now supported anymore, RedHat has it under its
payedsupport agreement (se
Hello
what is the essential difference between the default squid package and
this squid34 package,
as I have problems using this squid34 package for FTP connections;
there are no shown icons, when going to e.g. ftp://ftp.adobe.com/
when I tell the browser to show the image then I get this squid
Hello,
in /etc/sysconfig/network-scripts/ifcfg-eth0 I have this
...
IPV6INIT=yes
IPV6ADDR=prefix::5
IPV6ADDR_SECONDARIES="prefix::2 prefix::3 prefix::4"
IPV6_AUTOCONF=no
IPV6_DEFAULTGW=prefix::1
IPV6_DEFAULTDEV=eth0
when I enter ifconfig the IPv6 addresses are in a different order
eth0 Link enca
On Wed, May 31, 2017 03:55, Steven Tardy wrote:
>
>> On May 30, 2017, at 3:26 AM, Walter H.
>> wrote:
>>
>> is there a way to influence the order?
>
> Not sure what your use of multiple IPs is. . . but I'd probably use an
> interface alias instead of
On 23.06.2017 12:37, Anthony K wrote:
On 23/06/17 20:22, Günther J. Niederwimmer wrote:
Have we broken or not updated mirrors in the yum config ?
Thanks for a answer,
See *Problems with EPEL* further down the list.
it is not EPEL itself
___
CentOS
On 23.06.2017 17:02, m.r...@5-cent.us wrote:
Fabian Arrotin wrote:
On 23/06/17 12:22, Günther J. Niederwimmer wrote:
Hello List,
in the last weeks I have many, many Errors from chron hourly on my
systems :-
(.
Have we broken or not updated mirrors in the yum config ?
Can you give details ple
On 23.06.2017 21:31, m.r...@5-cent.us wrote:
Walter H. wrote:
this isn't fixed ...
yum update
Loaded plugins: fastestmirror, security
Setting up Update Process
Determining fastest mirrors
epel/metalink
| 14 kB 00:00
* base: centos.mirror.constant.com
*
Hello,
what is causing the following, and can someone give the solution which is
mentioned at https://access.redhat.com/articles/1320623
by the way: why are the "fastest" mirrors from other continent?
[root@host sysconfig]# yum clean all
Loaded plugins: fastestmirror, security
Cleaning repos: ba
On 30.06.2017 18:11, Yves Bellefeuille wrote:
Do you know this?
"For operational use, shell access is assumed, and root privileges are
required."
It's not much of a secret that you can mess with a system if you have
root access...
and in case you restart the box, this hack is gone :-)
Hello,
at the last update (Kernel updated
from 2.6.32-696.3.2.el6.x86_64 to 2.6.32-696.6.3.el6.x86_64)
I got these messages
Updating : ipv6calc-1.0.0-20.el6.x86_64 6/25
/var/tmp/rpm-tmp.yi7R81: line 1: /usr/sbin/ldconfig: No such file or
directory
warning: %post(ipv6calc-1.0.0-20.el6.x86_64) scr
On 23.07.2017 13:08, vychytraly . wrote:
Hello friends,
I have a Gigabit network with few Windows and Centos 7 machines and I
noticed that when copying files via Samba from:
Windows to Windows I can copy files with speed of +- 120 MBps (I think this
is the max speed gigabit network can provide)
On 23.07.2017 16:48, vychytraly . wrote:
Thank you very much, I will try these.
There are only Centos 7 and Windows 10 machines on the network.
in case this doesn't give any diagnostic, look for iperf on both sides,
linux and windows,
this tests the native network speed ...
https://iperf.fr/
On 23.07.2017 19:56, mad.scientist.at.la...@tutanota.com wrote:
Can I ask where people are downloading samba from? I followed the instructions
in the centos wiki but it's hard to tell what to do next on the German site.
It was easy before but totally murky now (at least to this wetware). a l
On 30.07.2017 14:29, Johnny Hughes wrote:
I personally have a Fedora machine that I keep updated and do some work
on all the time learning/testing. I just seamlessly upgraded it from
Fedora 25 to Fedora 26 using a couple of dnf commands .. awesome
experience actually.
because of this feature to
On 30.07.2017 20:22, Johnny Hughes wrote:
On 07/30/2017 09:41 AM, Walter H. wrote:
On 30.07.2017 14:29, Johnny Hughes wrote:
I personally have a Fedora machine that I keep updated and do some work
on all the time learning/testing. I just seamlessly upgraded it from
Fedora 25 to Fedora 26
On 31.07.2017 13:23, Mark Haney wrote:
Uh, I run VMWare workstation just fine on my F26 upgraded machine. No,
it didn't work when I upgraded, but it's trivial to fix.
http://rglinuxtech.com/?p=1939
This link gets you a running workstation in about 5 minutes.
not really, with this I only get th
On 31.07.2017 13:15, Johnny Hughes wrote:
Running external things like VMWare Workstation (or other 3rd party
custom compiled apps) is exactly what enterprise distros like RHEL,
CentOS, Ubuntu LTS, SUSE SLES are designed for .. running things already
compiled for a long period of time while prov
Hello,
how do achieve this:
how must files /etc/sysconfig/network-scripts/ look like to be the same as
entering the following two commands ...
ip -f inet6 rule add fwmark 1 lookup 100
ip -f inet6 route add local ::/0 dev lo table 100
is there the localhost device lo correct, or does it have to b
On 25.10.2017 18:47, Warren Young wrote:
You’re making things hard on yourself by insisting on Bash, by the way. This
solution is better expressed in Perl, Python, Ruby, Lua, JavaScript…probably
dozens of languages.
or just awk ...
___
CentOS maili
Hello,
I have an incoming mailserver, and there I'm implementing a mailfilter,
which I did like this:
http://www.postfix.org/FILTER_README.html#simple_filter
there they use /var/spool/filter
in this sample script the temporary file is deleted;
can I keep it there for a short time (1 week)?
T
Hello,
there is a short explanation about virtual hosts in Apache ...
https://wiki.centos.org/TipsAndTricks/ApacheVhostDefault
the `hostname` gives a different donmain name than what should be hosted ...
e.g. `hostname` is host.example.org and the domain to be hosted is
example.com, so I did th
On Mon, November 13, 2017 15:54, Joseph L. Casale wrote:
> -Original Message-
> From: CentOS [mailto:centos-boun...@centos.org] On Behalf Of Walter H.
> Sent: Monday, November 13, 2017 4:32 AM
> To: centos@centos.org
> Subject: [CentOS] Strrange behavior of VirtualHosts in
On 17.11.2017 16:16, m.r...@5-cent.us wrote:
I can't seem to find apcupsd for C 6. Just went to epel's website, and not
visible. Anyone have a clue?
mark
yum list | grep apcupsd
shows this:
apcupsd.x86_64 3.14.12-1.el6
@epel
_
Hello,
I have a CentOS6 VM with davfs2 where I mount WebDAV Shares;
one I have at a storage hoster and one I configured myself on a virtual
server I rented on a hoster;
why does 'df' always show the same value for capacity
[root@centos6-vm ~]# df
Filesystem 1K-blocks Used Availab
On Thu, January 4, 2018 05:22, Phil Perry wrote:
> I couldn't find any reports upstream at nvidia so am unsure if they are
> aware of the issue. For reference, my GK208 [GeForce GT 730] in my test
> system is unaffected by the issue and is working fine with the 384.98
> driver over DVI.
keep in m
Hello,
will there be updates for these CVEs for CentOS 6?
Thanks,
Walter
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
Hello,
are there updates for this CVE with ClamAV f. CentOS 6 in progress?
Thanks,
Walter
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On 26.01.2018 15:09, Johnny Hughes wrote:
On 01/26/2018 05:55 AM, Walter H. wrote:
Hello,
are there updates for this CVE with ClamAV f. CentOS 6 in progress?
The CentOS Project does not release ClamAV. What repo are you getting
it from? I see that it does exist in EPEL.
from EPEL repo
Hello,
just a simple question, my router has CentOS 6 with the apcupsd running,
in the log of
apcupsd I see this:
2018-02-01 19:05:54 +0100 apcupsd 3.14.12 (29 March 2014) redhat
startup succeeded
2018-02-04 15:52:43 +0100 Power failure.
2018-02-04 15:52:49 +0100 Running on UPS batteries.
Hello,
how can I prevent of using these mirrors?
# yum clean all
Loaded plugins: fastestmirror, security
Cleaning repos: base extras updates
Cleaning up Everything
Cleaning up list of fastest mirrors
# yum update
Loaded plugins: fastestmirror, security
Setting up Update Process
Determining faste
On 21.06.2018 19:28, Robert Heller wrote:
Are there any imap daemons (besides cyrus-imapd). cyrus-imapd is appearently
not compatible with postfix + procmail. I need an imap daemon that will work
with a postfix + procmail system.
the problem seems to be procmail, I use postfix and cyrus-imapd
On Thu, June 21, 2018 23:23, Robert Heller wrote:
> At Thu, 21 Jun 2018 20:42:50 +0200 CentOS mailing list
> wrote:
>
>>
>> On 21.06.2018 19:28, Robert Heller wrote:
>> > Are there any imap daemons (besides cyrus-imapd). cyrus-imapd is
>> appearently
>> > not compatible with postfix + procmail.
On Thu, June 21, 2018 23:23, Robert Heller wrote:
> At Thu, 21 Jun 2018 20:42:50 +0200 CentOS mailing list
wrote:
>
>>
>> On 21.06.2018 19:28, Robert Heller wrote:
>> > Are there any imap daemons (besides cyrus-imapd). cyrus-imapd is
>> appearently
>> > not compatible with postfix + procmail. I
On 28.06.2018 16:30, mark wrote:
Hi, folks,
Just ran into a problem: someone with a new laptop, running Win 10,
version 1709, tried to map their home directory (served from a CentOS
6.9 box, and it fails, with Windows complaining that it no longer
supports SMBv1, and if you go to their site,
Hello,
the RPM
ca-certificates-2018.2.22-65.1.el6.noarch
has a big problem ...
many certificates were removed - my proxy uses this as source and isn't
able to validate correct any more -
most sites show this:
/[No Error] (TLS code: X509_V_ERR_SELF_SIGNED_CERT_IN_CHAIN)
/Self-signed SSL Cert
On 04.07.2018 18:37, Alice Wonder wrote:
On 07/04/2018 08:54 AM, Walter H. wrote:
Hello,
the RPM
ca-certificates-2018.2.22-65.1.el6.noarch
has a big problem ...
many certificates were removed - my proxy uses this as source and isn't
able to validate correct any more -
most sites show
On 15.07.2018 00:13, Jay Hart wrote:
Clamd failed to start.
try removign it (yum remove ...) reboot and then reinstall it again
(yum install ...)?
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On Mon, July 16, 2018 20:04, Alexander Dalloz wrote:
> Am 16.07.2018 um 19:42 schrieb Walter H.:
>> On 15.07.2018 00:13, Jay Hart wrote:
>>> Clamd failed to start.
>>>
>> try removing it (yum remove ...) reboot and then reinstall it again
>> (yum install .
On Tue, July 17, 2018 01:41, Jay Hart wrote:
>
>
>> On 17 July 2018 at 09:24, Jay Hart wrote:
>>
>>> Hello,
>>>
>>> What would the recommended minimum amount of RAM be, to run Centos 7.
>>> 16GB???
>>>
>>
>>
>> Jay, it helps us help you when you give more information.
>>
>> I have CentOS 7 running
On 31.08.2018 21:31, Michael Schumacher wrote:
certbot works only with ports 80 or 443? Can lego work with with IMAP
ports like 143 or 993? The documentation is not very clear.
in case of other then Webserver you use ACME-DNS
just for a simple ACME client that is capable for ACME-DNS use acme.
On 01.09.2018 20:12, Rainer Duffner wrote:
Am 01.09.2018 um 18:00 schrieb Leon Fauster via CentOS:
Out of curiosity - do you change also the private key every time?
when renewing a certificate the private key should also be changed;
other ways the renewal because of short validity period does
On 06.09.2018 21:15, Larry Martell wrote:
When I try and send mail I see this in the maillog:
Sep 6 11:59:48 postfix/sendmail[11059]: fatal: open
/etc/postfix/main.cf: Permission denied
But /etc/postfix/main.cf is world readable:
$ ls -l /etc/postfix/main.cf
-rw-r--r--. 1 root root 27176 Jun
Hello,
after I did update all my CentOS6 boxes - VMs and router; two of them
(one VM and the router) are my local DNS resolvers;
and I'm using the DNSSECTLSAvalidator plugin from nic.cz:
https://www.dnssec-validator.cz/
before the update this plugin worked using my resolvers, after the
updat
On 18.10.2018 00:08, Johnny Hughes wrote:
The bottom line .. we don't make the decision whether or not to use
systemd or not. We rebuild RHEL source code.
will there come a CentOS 6.11 which will be capable of TLS1.3 or HTTP/2?
I'm sure there will come a CentOS 8, but when is it probable to be
On 31.10.2018 04:44, Turritopsis Dohrnii Teo En Ming wrote:
Good morning from Singapore,
This is of paramount importance. Would Red Hat Enterprise Linux (RHEL), CentOS,
and Fedora remain open source/free software after IBM buys Red Hat for $34
Billion?
RHEL is open source, but not for free
On 03.11.2018 08:44, yf chu wrote:
I have a website with millions of pages.
does 'millions of pages' also mean 'millions of files on the file system'?
just a hint - has nothing to do with any file system as its universal:
e.g. when you have 1 files
don't store them in one folder, create 10
On 02.11.2018 21:02, Frank Cox wrote:
https://www.theregister.co.uk/2018/11/02/rhel_deprecates_kde/
That's still several years in the future, of course.
But it's interesting nonetheless.
by reading between the lines this could mean, that RHEL 7 (CentOS 7 and
other forks of RHEL)
is the last o
On 15.02.2019 06:29, Turritopsis Dohrnii Teo En Ming wrote:
Hi,
Could you recommend affordable and reliable cloud storage for 50 TB of data?
whats your budget?
and 50 TB = 50 000 GB is a big amount which isn't this cheap ...
___
CentOS mailing list
On 15.02.2019 09:14, Turritopsis Dohrnii Teo En Ming wrote:
On Fri, Feb 15, 2019 at 4:10 PM Walter H. wrote:
On 15.02.2019 06:29, Turritopsis Dohrnii Teo En Ming wrote:
Hi,
Could you recommend affordable and reliable cloud storage for 50 TB of data?
whats your budget?
and 50 TB = 50 000 GB
On 15.02.2019 18:10, (RS) Tyler Schroder wrote:
OP - Backblaze Personal. May be like $1/extra per month than your budget.
Unlimited IO and backup storage assuming you only need redundancy.
https://www.backblaze.com/cloud-backup.html
would you really backup into a system, that has closed connec
On 15.02.2019 19:27, Warren Young wrote:
Tell ’im ’e’s *dreamin’!*.
my words of unrealistic wishes :-)
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On 15.02.2019 10:54, Phoenix, Merka wrote:
Just downloading 2% of 50 TB (1 TB) would take a while over even a fast network
link (measured in megabits (Mb), not megabytes (MB) like disk storage). Even on
a local LAN downloading 1 TB is several hours @ 8 Mb/second on a Gigabit
Ethernet link w/ n
On 22.02.2019 07:12, Ralf Prengel wrote:
Hallo,
the laptop of my wife is the last Win7 system in my network.
My question:
I need a well supported printer (MFC) with network interface, if possible with
colour printing.
Ralf
buy a color laserjet that can postscript, there are cheap ones; and ge
On 15.05.2019 16:21, Valeri Galtsev wrote:
Dear All,
My apologies for OT question.
I wonder if someone of Android smartphone owners backs up their device
and user/application data NOT to google cloud.
no problem, host your own nextcloud and get the nextcloud app;
also no need of having the co
On 17.09.2019 16:20, Valeri Galtsev wrote:
On 2019-09-17 09:06, Miroslav Geisselreiter wrote:
Hi guys,
when I send e-mails to CentOS mailing list , I
received DMARC / DKIM failure reports. Is it possible to solve this
problem and if so how?
That is why DMARC took 10 years of heated disc
Hello,
can someone explain these errors
Oct 27 15:34:05 vhost01 named[1316]: zone #ZONE#/IN/auth: refresh: retry limit
for master IPV6-MASTER#53 exceeded (source IPV6-THIS#0)
Oct 27 15:34:05 vhost01 named[1316]: zone #ZONE#/IN/auth: Transfer started.
Oct 27 15:34:06 vhost01 named[1316]: zone #Z
Hello,
it has been a while since I had setup a DNS-Server with CentOS 6;
these days I added a few zones needed for DDNS; this works
but in /etc/ I found quite a strange file, I'm not sure if it was in use
at the beginning I used this system as a DNS-Server, and after several
'yum update'
not any m
On 10.05.2016 18:57, Александр Кириллов wrote:
this seems to be relevant in chroot environments;
as I noticed when configuring the DDNS-feature, that this is a little
bit
weired, when running in a chroot environment; I saw the
recommendation not
to use a chroot in the man-page and removed bind
On 10.05.2016 21:36, Александр Кириллов wrote:
I'm also using ddns and have my zone files in
/var/named/chroot/var/named/dynamic.
are you using DDNS in DualStack (IPv4 and IPv6 together) or do you
have only DHCP or DHCPv6 and not both?
IPv4 only.
if a host has IPv4 only or IPv6 only this work
On 10.05.2016 21:08, m.r...@5-cent.us wrote:
Walter H. wrote:
On 10.05.2016 18:57, Александр Кириллов wrote:
I'm also using ddns and have my zone files in
/var/named/chroot/var/named/dynamic.
are you using DDNS in DualStack (IPv4 and IPv6 together) or do you have
only DHCP or DHCPv6 an
Hello,
just curious;
since March 3rd, 2016 everdays logwatch-mail
shows this:
Last Status:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.99 Recommended version: 0.99.1
on May 4th, 2016 I updated clamav by
yum update clamav
since then the daily logwatch-mail
On Sun, May 15, 2016 04:55, Richard wrote:
>
> It generally takes a week or so for an update to make it to epel.
> They are still showing 0.99.1-1. You might want to check the
> epel-testing repo in a couple of days.
wouldn't it be a good idea to include
libclamunrar.so and libclamunrar_iface.so?
On 19.05.2016 18:56, Kay Schenk wrote:
Hello all --
Recently, I'm seeing DOS line ends, ^M, on my /var/log/boot.log file.
Honestly, I don't check this very often so I can't say exactly when this
occurred. Is this just MY experience or are others seeing this also.
this file shows ident content,
Hello,
I have several virtual machines, all with CentOS 6.x and one so called
virtual server at a web hoster
my virtual machines (VMware) were all installed manually using the .iso,
some exist longer and therefore
were originally a CentOS 6.3, some are newer and wer originally a CentOS
6.6;
On 28.05.2016 21:03, Paul R. Ganci wrote:
I was wondering if somebody could help me with an Apache re-write
rule. Apparently CentOS 6.8 is running apache-2.2.15-53. I am trying
to redirect all pages except for two pages. The apache rewrite
directives in the httpd config are:
RewriteEngine on
R
Hello,
I have several CentOS 6 VMs, I have updated the first one successfully,
but there is one thing I miss or I don't like;
How do I get the standard console with 80x25 back?
this is /boot/grub/grub.conf
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title CentOS (2.6.
Hello,
I have several CentOS 6 VMs, I have updated the first one successfully,
but there is one thing I miss or I don't like;
How do I get the standard console with 80x25 back?
Hello,
this is /boot/grub/grub.conf
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title CentO
Hello,
the last times, when I tried to update,
it get time outs; even when 'yum list'
[root@host ~]# yum list
Loaded plugins: fastestmirror, security
Determining fastest mirrors
epel/metalink | 13 kB 00:00
* base: centos.den.host-engine.com
* epel: mirror.steadfast.net
* extras: centos.den.host-
On 16.06.2016 19:22, m.r...@5-cent.us wrote:
Walter H. wrote:
Hello,
the last times, when I tried to update,
it get time outs; even when 'yum list'
how or where can I reset this behavour, to have the really fastest mirros
used?
Have you tried yum clean all before reruning?
On 15.06.2016 16:17, Warren Young wrote:
On Jun 15, 2016, at 7:57 AM, Александр Кириллов wrote:
Nowadays it's quite easy to get normal ssl certificates for free. E.g.
http://www.startssl.com
http://buy.wosign.com/free
Today, I would prefer Let’s Encrypt:
https://letsencrypt.org/
It is ph
On 15.06.2016 15:57, Александр Кириллов wrote:
Nowadays it's quite easy to get normal ssl certificates for free. E.g.
http://www.startssl.com
http://buy.wosign.com/free
that is right, but hink of your potential clients, because
wosign has a problem - slow OCSP, ...
because their server infrastu
On 16.06.2016 19:40, Frank Cox wrote:
On Thu, 16 Jun 2016 19:34:09 +0200
Walter H. wrote:
Yes, but doesn't help ...
the same before ...
by the way, I can't image that there is no mirror in Europa,
and that the "timeout"-mirrors from US are the fastest;
yum -disable
On 16.06.2016 20:09, Gordon Messmer wrote:
On 06/16/2016 10:53 AM, Walter H. wrote:
lets encrypt only trusts for 3 months; would you really except in an
onlineshop, someone trusts this shop?
let us think something like this: "when the CA only trusts for 3
months, how should I trust
On 16.06.2016 20:51, Warren Young wrote:
On Jun 16, 2016, at 12:41 PM, Walter H. wrote:
On 16.06.2016 19:40, Frank Cox wrote:
On Thu, 16 Jun 2016 19:34:09 +0200
Walter H. wrote:
Yes, but doesn't help ...
the same before ...
by the way, I can't image that there is no mirror in E
On 16.06.2016 21:39, Ned Slider wrote:
On 16/06/16 19:41, Walter H. wrote:
On 16.06.2016 19:40, Frank Cox wrote:
On Thu, 16 Jun 2016 19:34:09 +0200
Walter H. wrote:
yum -disableplugin=fastestmirror nowseewhathappens.
yes this goes fast, no timeout;
can I configure this in /etc/yum.conf
On 16.06.2016 21:42, Александр Кириллов wrote:
that is right, but hink of your potential clients, because
wosign has a problem - slow OCSP, ...
because their server infrastucture is located in China, and not the
best bandwidth ...
when validity checks of the used SSL certificate very probable fa
On 16.06.2016 22:02, Gordon Messmer wrote:
Without using a metaphor, please explain exactly who you think will
not trust these certs, because I have never met these people.
then you know now, that there exist such people ...
at least the folks where their security software (antivirus, whatever)
On 16.06.2016 21:59, Tony Schreiner wrote:
I note that duke.edu matches uk, and unl.edu matches nl.
Maybe they are regular expressions,
i just tried with
#include_ony=\.nl,\.de
and got less surprising results
I tried this:
include_only=\.at,\.ch,\.de,\.nl,\.uk
and got this:
Determining
On 17.06.2016 16:27, Александр Кириллов wrote:
Walter H. писал 2016-06-16 22:54:
On 16.06.2016 21:42, Александр Кириллов wrote:
I don't think OCSP is critical for free certificates suitable for
small businesses and personal sites.
this is philosophy;
I'd say when you do it
On 17.06.2016 16:46, James B. Byrne wrote:
On Thu, June 16, 2016 13:53, Walter H. wrote:
On 15.06.2016 16:17, Warren Young wrote:
but it also affects the other public CAs: you can’t get a
publicly-trusted cert for a machine without a publicly-recognized
and -visible domain name. For that
On 17.06.2016 19:57, Александр Кириллов wrote:
Then OCSP stapling is the way to go but it could be a real PITA to
setup for the first time and may not be supported by older browsers
anyway.
not really, because the same server tells the client that the SSL
certificate is good, as the SSL certi
On 17.06.2016 22:39, Александр Кириллов wrote:
yes and no, but faking a valid OCSP response that says good instead of
revoked is also possible ...
Could you please provide any proof for that statement? If it were true
the whole PKI infrastructure should probably be thrown out of the
window. )
On 18.06.2016 12:39, Ned Slider wrote:
On 17/06/16 20:04, Warren Young wrote:
In another recent thread,[1] someone was having trouble with the
yum-plugin-fastestmirror feature, so I suggested he remove it, since
it’s just a plugin and should therefore be optional. He reported
that it couldn
On 18.06.2016 03:41, Gordon Messmer wrote:
On 06/17/2016 07:56 AM, James B. Byrne wrote:
On Thu, June 16, 2016 14:09, Gordon Messmer wrote:
I doubt that most users check the dates on SSL certificates,
unless they are familiar enough with TLS to understand that
a shorter validity period is bette
On 18.06.2016 14:54, Chris Olson wrote:
We run several CentOS 6 and CentOS 7 systems as virtual machines using
VirtualBox on Windows 7.
a similar setup as mine; I use VMware;
have you installed and configured ntp?
does virtualbox provide some package for Linux,
that optimizes the usage as virt
1 - 100 of 150 matches
Mail list logo
