Johnny Hughes wrote:
> Olaf Mueller wrote:
>> after upgrade from CentOS 5 to 5.1 I see the following error
>> in /var/log/messages:
>> 'rpc.idmapd[2330]: main: open(/var/lib/nfs/rpc_pipefs/nfs): No such
>> file or directory'
>> The directory exists [..
Hello,
after upgrade from CentOS 5 to 5.1 I see the following error
in /var/log/messages:
'rpc.idmapd[2330]: main: open(/var/lib/nfs/rpc_pipefs/nfs): No such
file or directory'
The directory exists with the permissions
dr-xr-xr-x 2 root root0 Dec 7 10:21 nfs
So is this an owner/permisson pr
Hello,
if login as user I get the following error message in
~/.xsession-errors*:
/etc/X11/xinit/Xsession: line 15: unask: command not found
Changing 'unask' to 'umask' seems to fix it. This happens under CentOS
5 and 5.1.
regards
Olaf
___
CentOS mai
Hello,
I am using CentOS 4.6 (2.6.9-67.plus.c4) on a toshiba tecra 8000
notebook. If closing the panel, "Panel Power On/Off" is enabled in
bios, the notebook does suspend. But after opening the panel, the
notebook completely freezes. If the suspend only takes a few minutes,
then everything is work
Niki Kovacs wrote:
> [EMAIL PROTECTED] a écrit :
>> Did/Can you get the customer to try 'Ctrl-Alt-F1' or similar
> I suggested Ctrl-Alt-Backspace, but that didn't work.
Last time I saw something similar was when my harddisk get broken. Are
there any opcode entries in /var/log/messages or /var/log/
Niki Kovacs wrote:
> Olaf Mueller a écrit :
> After I had installed the driver and fired up TWM, I wanted to test
> 3D abilities, so I typed 'glxgears' in TWM's xterm, but I got an
> error message about some missing GLX extension. I didn't investigate
> this fu
Niki Kovacs wrote:
> Olaf Mueller a écrit :
>
>> Last time I saw something similar was when my harddisk get broken.
>> Are there any opcode entries in /var/log/messages or /var/log/dmesg?
>>
> Sorry I don't understand what "opcode entries" means (I'
Hello,
I have installed CentOS 5 (2.6.18-53.1.4.el5) on my new Acer Extensa
5220 notebook and everything seems to work fine except of the
following:
1)
Display is ok, but could maybe be better? The driver is set to 'vesa'
but should be 'intel', in my opinion. But 'intel' isn't working in
xorg.conf
Olaf Mueller wrote:
Hello.
> I have installed CentOS 5 (2.6.18-53.1.4.el5) on my new Acer Extensa
> The 5-in-1 Card Reader isn't working.
One step more:
I have installed tifm-0.6b.tar.bz2 from
http://developer.berlios.de/projects/tifmxx and load the following
modules:
modprob
Olaf Mueller wrote:
> Olaf Mueller wrote:
>
> Hello.
>
>> I have installed CentOS 5 (2.6.18-53.1.4.el5) on my new Acer Extensa
>> The 5-in-1 Card Reader isn't working.
> One step more:
> I have installed tifm-0.6b.tar.bz2 from
> http://developer.b
Hello,
this morning my centos 5 server (2.6.18-53.1.4.el5) failed on the dvd
device and disabled dma. The dvd-writer (/dev/hdg) is connected to the
following controller as a secondary master.
02:07.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133
Host Controller (rev 02)
There is
fred smith wrote:
Hello.
> Specifically, could a laptop running Centos 5.1 be expected to (be
> able to) connect to a wireless access point using WPA2 security
> settings?
Yes, it could. I am using a laptop with a pcmcia wlan card with wpa2
and aes and 54Mbit/s. It is connected with a speedport 7
Hello,
if I hibernate my notebook, suspend to disk in package
hibernate-tuxonice-1.97-1cubbi2, with CentOS 5 and Kde 3.5.8 the sound
isn't working any more after waking it up. So I try to disable the
sound modules in /etc/hibernate/blacklisted-modules, but this failes
with a 'Some modules failed t
Hello,
all my data are hosted by a server and exported with nfsv4. For example
if a user logs in on a client, /home and /data are exported with nfsv4
and autofs. Now if the user delete some files, the trashcan under
gnome doesn't change its status nor doesn't show the deleted files if
opening the
Olaf Mueller wrote:
> all my data are hosted by a server and exported with nfsv4. For
> example if a user logs in on a client, /home and /data are exported
> with nfsv4 and autofs. Now if the user delete some files, the
> trashcan under gnome doesn't change its status nor
Hello,
if compiling the driver for my ralink wlan card or compiling the driver
for my 5-1 card reader, I get the following error message.
./include/linux/kernel.h:10:20: error: stdarg.h: No such file or
directory
Is there something broken on my system?
# rpm -qa | grep kernel
kernel-devel-2.6.1
Hello,
I am using CentOS 5.1 on a toshiba tecra 8000 notebook. That works
great so far. The only thing I could not realize is to shutdown the
notebook if closing the lid. Therefor I need the current status (open
or close) of the lid, but I don't know how.
Is there any way to get this status, maybe
Kanwar Ranbir Sandhu wrote:
Hello,
> On Tue, 2008-04-08 at 08:54 +0200, Olaf Mueller wrote:
>> Is there any way to get this status, maybe under /proc/ or by some
>> command?
> Look under /proc/acpi/button/lid/. On one of my notebooks, this
> works:
/proc/acpi doesn&#x
Ralph Angenendt wrote:
Hello.
> Olaf Mueller wrote:
>> /proc/acpi doesn't here exists, acpid is installed. Is my notebook
>> too old?
> That is entirely possible, yes. The 8000 is from ~1999?
Yes, it is. I use it as a thin client (X -ac -port 177 -query ).
> Might b
Ralph Angenendt wrote:
Hello,
> Olaf Mueller wrote:
>> ACPI: Interpreter disabled.
>> Is this also blacklisted under CentOS 4, or better, would CentOS 4
>> be a solution for my problem?
> You can try with the live CD. But I'd think that it also is disabled
> the
Hello,
does CentOs 5 supports an Adaptec AHA-2940W/2940UW scsi controller
(pci)? Is this controller maybe supported by the aic7xxx driver?
I want to install CentOS 5 on my desktop pc but the currently installed
pci scsi controller for my scanners (drivers: 2x tmscsim, 1x advansys)
are not support
Hello,
I can write to an ntfs partion if mounting it by hand with 'mount -t
ntfs-3g /dev/sdf5 /mnt/xp'. But if I use the mount option from the kde
Storage Media panel applet (kdebase-3.5.4-13.6.el5.centos) then the
partion will be mounted without write support. So how to say kde and
CentOS to use
Ralph Angenendt wrote:
Hello Ralph,
> Olaf Mueller wrote:
>> I can write to an ntfs partion if mounting it by hand with 'mount -t
>> ntfs-3g /dev/sdf5 /mnt/xp'. But if I use the mount option from the
>> kde Storage Media panel applet (kdebase-3.5.4-13.6.el5.cent
Hi,
there was a message in the list at Fri 26 Oct 2007 21:13:58, that
beagle was added to centos testing repo. But I could not find it
there. Please could someone give me an advice. Thank's a lot!
"We have added beagle-0.2.18, tomboy-0.8.1, and mono-1.2.4 to the
CentOS-5 testing repo for both x86
Johnny Hughes wrote:
> Olaf Mueller wrote:
>> there was a message in the list at Fri 26 Oct 2007 21:13:58, that
>> beagle was added to centos testing repo. But I could not find it
>> there. Please could someone give me an advice. Thank's a lot!
> Those have been moved
Hello,
what do I need to encode mp3 with Sound Juicer under CentOS 5.1?
Thank you
Olaf
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Ralph Angenendt wrote:
Hello Ralph,
> Olaf Mueller wrote:
>> what do I need to encode mp3 with Sound Juicer under CentOS 5.1?
> gstreamer-plugins-bad and/or gstreamer-plugins-ugly from rpmforge. See
> <http://wiki.centos.org/Repositories>. And maybe lame from the same
>
Hello,
I think about to change my desktop system from fedora core 6 to centos
5. But on checking out if my hardware is supported by centos 5 I could
not find any support for my scsi adapter which needs a advansys.ko
module (Advanced System Products, Inc ABP940-U / ABP960-U).
Does centos 5 has su
Akemi Yagi wrote:
> On 6/29/07, Olaf Mueller <[EMAIL PROTECTED]> wrote:
>> [...]
>> advansys.ko module [...]
>> Does centos 5 has support for this adapter by default or maybe by a
>> kernel like centosplus?
> I am afraid this module is not in the CentOS
Hello CentOS developer team,
thank you very much for the release of CentOS 5.6. I have upgraded my
server, notebook, netbook and workstation from 5.5 to 5.6 and
everything works really fine so far, CentOS 5.6 seems to be rock solid.
The only little problem happens on the upgrade of my server, sin
fred smith wrote:
> On Fri, Apr 08, 2011 at 02:35:30PM +0200, Olaf Mueller wrote:
>> I am grateful for the CentOS Project. I like it's stability and
>> long-term support.
> I haven't seen a 5.6 release announcement yet. Have I missed it?
I did not use the word announ
fred smith wrote:
> Clearly you found my comment to be offensive. It certainly was
> not meant that way. It was simply a friendly warning that depending
> on a pre-announcement set of files may not give you the final product.
Ok, I get the point now. Sorry Fred, my reaction was not appropriate.
Y
William Hooper wrote:
> An this was posted to the CentOS twitter account yesterday 4/7
> (shortly after having to re-issue the x86_64 ISOs):
>
> http://twitter.com/CentOS/status/55950095505567745
>
> "Just want to also point out that CentOS-5.6 is *not* released. And
> packages, ISOS are liable
Hello,
I am searching for an internet usb surf-stick (umts) that works under
CentOS. Is anyone using such a stick and if so, which chip has this
usb-stick?
Would a Huawei E160E chip work under CentOS? Or maybe under CentOS with
the 2.6.35 kernel from elrepo?
Thank you very much!
regards
Olaf
_
johhny_at_poland77 wrote:
> I just need a "temporary" pppoe server, that only uses PAP
>
> ___Can someone post a howto, just in a few lines, what to do?[...]
You have posted this at least to three groups (centos, fedora, ubuntu).
No-one here should waste time in answering your mail extensive.
r
compdoc wrote:
>>> I just need a "temporary" pppoe server, that only uses PAP
>>>
>> >___Can someone post a howto, just in a few lines, what to do?[...]
>>You have posted this at least to three groups (centos, fedora,
>>ubuntu). No-one here should waste time in answering your mail
>>extensive.
> M
Rudi Ahlers wrote:
> On Tue, Apr 19, 2011 at 10:33 PM, Olaf Mueller
> wrote:
>
>> johhny_at_poland77 wrote:
>>
>> > I just need a "temporary" pppoe server, that only uses PAP
>> >
>> > ___Can someone post a howto, just in a few lines,
Hello,
'yum update' runs into the following error message.
Package libuser-devel-0.54.7-2.1.el5_5.2.i386.rpm is not signed
regards
Olaf
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Janez Kosmrlj wrote:
> anyone tried firefox 3.5 under centos 5.4
Yes, from www.mozilla.com, no rpm. Works great here since CentOS 5.3,
now 5.4.
regards
Olaf
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Hello,
anyone else seeing this?
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Package clamav-db.i386 0:0.93-1.el5.rf set to be updated
---> Package clamd.i386 0:0.93-1.el5.rf set to be updated
---> Package clamav-milter.i386 0:0.93-1.el5.rf set to
Rogelio wrote:
Hello,
> I'm looking to set up a Jabber server and autocreate the user lists
> from Active Directory.
I am using Openfire from
http://www.igniterealtime.org/projects/openfire/index.jsp under CentOS
5 for instant messaging in my local network. It works great.
Also Openfire seems to
Hello,
in my CentOS-Base.repo file there is a line
baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch
and yum update said 'nothing to do'. Then I change this line to
baseurl=http://mirror.centos.org/centos/5.1/updates/i386 and yum
updates firefox, squid, sos and so on. That happ
Kai Schaetzl wrote:
Hello,
> Olaf Mueller wrote on Sat, 19 Apr 2008 20:14:35 +0200:
>
>> Does yum sometimes forget it's release version?
> what is the version string in your centos-release file?
there is only an redhat-release file under /etc/.
# cat /etc/redhat-release
Cen
Jim Perrin wrote:
Hello,
> On Sat, Apr 19, 2008 at 2:14 PM, Olaf Mueller
> <[EMAIL PROTECTED]> wrote:
>
>> Does yum sometimes forget it's release version?
>
> It shouldn't, unless the distroverpkg definition in /etc/yum.conf is
> wrong, or the packag
Hello,
since upgrading to CentOS 5.2 my notebook hangs while booting with
a "Kernel panic - not syncing: Fatal exception" error. Here is a
screenshot: http://www.istari.de/olaf/centos/r0013878.jpg
# uname -a
Linux beutelsend.istari.de 2.6.18-53.1.21.el5 #1 SMP Tue May 20 09:34:18
EDT 2008 i686 i6
Tim Verhoeven wrote:
Hello.
> On Tue, Jun 24, 2008 at 10:01 PM, Olaf Mueller
> <[EMAIL PROTECTED]> wrote:
>> since upgrading to CentOS 5.2 my notebook hangs while booting [...]
> Could you create a bug report on bugs.centos.org ? [...]
Ok, done as ID 0002912.
Thank
fred smith wrote:
Hello.
> 1. "shutdown -h now" goes all the way down but does not power down the
> box like it always has before. Same when shutting down via the GUI
> shutdown dialog.
I know this from systems with older processors. For me a 'apm=power-off'
in the /etc/grub.conf kernel-line does
fred smith wrote:
> On Wed, Jun 25, 2008 at 03:46:53PM +0200, Olaf Mueller wrote:
>> fred smith wrote:
>> > 1. "shutdown -h now" goes all the way down but does not power down
>> > the box like it always has before. Same when shutting down via the
>>
Hello,
is there any chance to get a headphone working under a acer extensa 5220
with CenOS 5.2 (2.6.18-92.1.6.el5) installed? Maybe by centosplus or
self compiled alsa sources?
# rpm -qa | grep alsa
alsa-lib-1.0.14-1.rc4.el5
alsa-utils-1.0.14-3.rc4.el5
The sound works great on this notebook and
Hello,
if trying to print
http://www.test.de/themen/versicherung-vorsorge/test/-Unfallversicherung/1260901/1260901/1262782/1262783/
by button "Seite drucken" firefox-3.0.1-1.el5.centos ends in
error '(Gecko:4820): Gtk-WARNING **: Unknown paper size A4' and wants
to print in "Letter". This also hap
Hello,
is anybody there who uses a Lenovo ThinkPad Edge E320 NWY3RGE (13.3")
with CentOS 5.7?
Ethernet and wireless lan is working with newer kernels from elrepo,
but I could not get the graphic card working in the right resolution
(1366x768).
00:02.0 VGA compatible controller [0300]: Intel Corpo
Hello,
if starting /etc/init.d/krb5kdc, kerberos binds to eth1 and the
*current* ip of ppp0.
# netstat -nap | grep :750\\b
udp0 0 91.9.220.166:7500.0.0.0:*
3180/krb5kdc
udp0 0 192.168.0.1:750 0.0.0.0:*
Hello,
since today I could not update my CentOS 5.3 system with yum cause of
the following error message.
# yum update
[...]
Resolving Dependencies
--> Running transaction check
---> Package exiv2.i386 0:0.18.2-1.el5.rf set to be updated
---> Package perl-Params-Util.i386 0:1.00-1.el5.rf set to b
Olaf Mueller wrote:
> I have asked about the missing perl(Class::MOP) >= 0.89 package on
> the rpmforge mailing list without getting any answer. So maybe could
> this be a problem of CentOS or Epel repo?
Ok, found it on the rpmforge list and the error is caused by rpmforge.
It was n
Ralph Angenendt wrote:
Hello.
> a) rpmforge and epel don't mix well
Yes, you are right. Now I have disabled rpmforge.
regards
Olaf
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Hello,
is there a security issue on CentOS 5.3 with openssh 4.3? I ask that
cause of
http://www.h-online.com/security/Rumours-of-critical-vulnerability-in-OpenSSH-in-Red-Hat-Enterprise-Linux--/news/113712
and http://secer.org/hacktools/0day-openssh-remote-exploit.html.
Should ssh login from inter
Phil Savoie wrote:
Hello.
> Tried yum update all yesterday and today and seems there is a perl
> dependency missing. Does anyone know if it is a problem or just a
> sync
It is a problem of the rpmforge repo. They build a lot of the perl
packages new and that will break dependencies for a short (
Ron Blizzard wrote:
Hello.
> Missing Dependency: libavcodec.so.51 is needed by package
> transcode-1.0.5-1.el5.rf.i386 (installed)
> Missing Dependency: libx264.so.55 is needed by package
> transcode-1.0.5-1.el5.rf.i386 (installed)
Ask in the rpmforge list. This has nothing to do with CentOS repo
Michael A. Peters wrote:
> update - it didn't actually bring the OS down, it brought X11 down -
What happens if you add the following to Section "Device"
in /etc/X11/xorg.conf?
Section "Device"
Option "AccelMethod" "XAA"
Option "XAANoOffscreenPixmaps" "true"
EndSection
Hello,
just a short hardware question. Does CentOS 5.3 supports a Leadtek
LR2960 (model S26361-D1910-V128, agp, 128mb) graphic card with a nVidia
GeForce FX5200 chip and dual dvi?
Thank you very much!
regards
Olaf
___
CentOS mailing list
CentOS@centos
John R Pierce wrote:
> Ed Warner wrote:
>> I'm using Firestarter as my firewall. If I restart the network or my
>> DSL line goes down, I have to manually restart Firestarter.
>> Does anyone have a suggestion as how I could further troubleshoot
>> this problem?
Remove the original firestarter line
Ed Warner wrote:
> I tried your suggestions without success. ip-up.local is executable in
> a bash console and if I do so, I get this message: "iptables v1.3.5:
> invalid mask '255' specified Try 'iptables -h' for more information.
A subent mask of 255? In my opinion it should be something like
/2
Hello,
is there a known problem with the new kernel for CentOS 5.3?
Till today, my server works without any problems. But after updating to
the new kernel 2.6.18-128.7.1.el5 the system freezes completely with no
more access by keyboard or over network. The last message
in /var/log/messages is 'Au
Karanbir Singh wrote:
Hello,
> On 08/25/2009 01:38 PM, Olaf Mueller wrote:
>> Is someone else this seeing?
> not me, I've got the new kernel on about 6 machines, and my laptop
> with no problems. What is the prev kernel you were running ?
this is the second time the syste
Karanbir Singh wrote:
Hello,
> On 08/25/2009 03:18 PM, Olaf Mueller wrote:
>> this is the second time the system freezes completely with kernel
>> 2.6.18-128.7.1.el5 with the same error message 'kernel: hdg:
>> dma_timer_expiry: dma status == 0x21'.
> while we
fred smith wrote:
Hello.
> I've been able to view the movie trailers at apple.com/trailers for
> years on my old Centos box (5.3). [...]
> Is anyone else having trouble with that? or to ask another way, can
> any of you still watch them?
Works here with 'User Agent Switcher' for Firefox. See for
fred smith wrote:
> While I haven't tried that,
?
> I don't think that's the problem I'm
> having: I can copy and paste the URL of the .mov file into mplayer or
> vlc from the commandline, and get the exact same symptoms. I.E., there
> is no browser involved in that transaction but it fails the
fred smith wrote:
> So, they're not gaining anything other than ill will by
> blocking us from viewing.
Yes. An other example for such a behaviour is Amazon.com.
Amazon.com has changed their data API to require that all searches be
signed with a secret key, unique to each user. As a result my tell
Filipe Brandenburger wrote:
> On Tue, Sep 15, 2009 at 06:39, Ralph Angenendt
> wrote:
>> On Tue, 2009-09-15 at 10:20 +0200, Niki Kovacs wrote:
>>> I remember having setup some web servers on Debian, and the
>>> tradition was that everything under /var/www/html (as in this
>>> example) was to be o
Les Mikesell wrote:
> Olaf Mueller wrote:
>> Filipe Brandenburger wrote:
>>
>>> On Tue, Sep 15, 2009 at 06:39, Ralph Angenendt
>>> wrote:
>>>> On Tue, 2009-09-15 at 10:20 +0200, Niki Kovacs wrote:
>>>>> I remember having setup
Brian Mathis wrote:
> You are being disingenuous here by selectively editing out the
> relevant quoted text from the same message above, which I will add
> back in as a quote here:
Disingenuous? Seems to me that it is a question of truth for you.
Once again. 'apache:apache' is a risk, but it is n
Hello,
since kernel 2.6.18-164.el5 no user could login any more from nfs client
into his home directory on nfs server. The kde error message is:
"The following installation problem was detected while trying to start
KDE:
Writing to $HOME directory (/home/) failed with the
error 'Permission denied'
Olaf Mueller wrote:
> since kernel 2.6.18-164.el5 no user could login any more from nfs
> client into his home directory
Now reported on CentOS Bug Tracker #0003840.
regards
Olaf
___
CentOS mailing list
CentOS@centos.org
http://lists.cent
Johnny Hughes wrote:
Hello.
> On 09/16/2009 09:42 AM, Olaf Mueller wrote:
>> Now reported on CentOS Bug Tracker #0003840.
> This is one of the reasons we are hesitant to release JUST the
> security updates and not all of 5.4 at once.
> Try this kernel again after we release th
Olaf Mueller wrote:
> Olaf Mueller wrote:
>> since kernel 2.6.18-164.el5 no user could login any more from nfs
>> client into his home directory
> Now reported on CentOS Bug Tracker #0003840.
Here are some more information and a workaround.
This is a know major flaw as
Rob Kampen wrote:
> Olaf Mueller wrote:
>> Olaf Mueller wrote:
>>> Olaf Mueller wrote:
>> I think this is a testing kernel for RHEL 5.5 (not 5.4!), but it
>> seems to me the best choice as a kernel under CentOS 5.3 at the
>> moment if you are running an
KC wrote:
Hello,
> check this
> http://wiki.centos.org/TipsAndTricks/MultimediaOnCentOS
since these packages are very old, what about the security of these
files? For example there are codecs for QiuckTime included, are
these files not affected by security bugs of the original
software?
I have a
Ashish Vijaywargiya wrote:
Hello.
> Can you please look at my problem ?
In my opinion you have not give us enough information to solve this
problem. Are you using wep, wpa, wpa2, wpa_supplicant, *-fwcutter? What
module are you loading, anything blacklisted in /etc/modprobe.conf
or /etc/modprobe.d
Anne Wilson wrote:
Hello.
> **Unmatched Entries**
>sendto(193.6.222.20) (fd=21): Invalid argument: 1 time(s)
>sendto(141.89.226.2) (fd=21): Invalid argument: 1 time(s)
>
> Does this mean that ntp is failing? I assume so, and if so, how do I
> change the sources to something that will w
Anne Wilson wrote:
> On Saturday 15 November 2008 10:41:14 Olaf Mueller wrote:
>> Anne Wilson wrote:
> No, the server is on a fixed IP, internally and externally.
Ok, here is my config file, hope this helps.
There was an option in the 'restrict default' line that I had
Indunil Jayasooriya wrote:
> There is a Printer connected to Windows XP Pc [...]
I don't see why this should be answered in a linux based mailing list.
> YOUR IDEAS R EXPECTED
Ask in a ms windows (xp) based mailing list.
regards
Olaf
___
CentOS maili
Russell Miller wrote:
Hello.
> directory via NFS. To duplicate, I cd into a share in two windows,
> copy a
> 1G file in the first window, and just do an ls in the other. The ls
> will hang until the write is done.
> Has anyone seen problems like this? How did you solve them?
Your nfs settings
Russell Miller wrote:
Hello.
> We're using nfs3 over tcp. rsize and wsize are 32768. Async is
> default, though I've tried sync.
>
> Funny thing is, turning on nfs debug and trying to trigger this
> problem
> seems to cause data corruption. Once it even managed to corrupt the
> local disk w
Russell Miller wrote:
Hello.
> We're using nfs3 over tcp. rsize and wsize are 32768. Async is
> default, though I've tried sync.
Try rsize=8192 and wsize=8192. And my settings for /etc/hosts.allow,
maybe helpful?
portmap:127.0.0. 192.168.0.
lockd: 127.0.0. 192.168.0.
rquotad:
Russell Miller wrote:
Hello.
>> > We're using nfs3 over tcp. rsize and wsize are 32768. Async is
>> > default, though I've tried sync.
>> Try rsize=8192 and wsize=8192. And my settings for /etc/hosts.allow,
>> maybe helpful?
> I can try it. But there's a reason that we're using 32768, apparen
Alexander Farber wrote:
Hello,
> On Mon, Feb 2, 2009 at 3:32 PM, John Doe wrote:
>> From: Alexander Farber
>>> [r...@ablprx01 squid]# rpm -qa|grep -i squid
>>> squid-2.6.STABLE6-5.el5_1.3
>> Sadly, CentOS squid packages are quite old.
>> Squid recent releases are: 2.7.STABLE5 and 3.0.STABLE12..
Anne Wilson wrote:
Hello,
> daily.cld updated (version: 8950, sigs: 72593, f-level: 38, builder:
> ccordes)
> service clamd status
> clamd: unrecognized service
> It has to be something stupid that I've missed. Can someone kick me
> in the
> right direction? Thanks
the following setup is he
Hello,
I have nfs version 4 running on a CentOS 5.2 server to export /home.
That works great so for, but clients can mount /home with nfs version 3
too. How can I disable nfs v3 on the server?
Thank you
Olaf
___
CentOS mailing list
CentOS@centos.org
h
Robert Nichols wrote:
Hello,
> Any hope of getting my laptop's Broadcom BCM94311 wireless running
> on CentOS 5?
I have had that working on CentOS 5.2 on a acer extensa 5220 notebook
with a BCM94311MCG wlan device and the following combination of
software and firmware.
- bcm43xx-fwcutter-006-3.f
Hello,
I have a CentOS 5.2 server that exports /home on the local network for 2
users by secure nfs4 with kerberos krb5p. The clients are a notebook
and a desktop pc.
The following error is always reproducible on all clients. If running
the clients on high load, that means for example 5 firefox wi
Olaf Mueller wrote:
> Is anybody here successfully using nfs4/krb5p with CentOS 5.2?
After a few more testing the setting nfs4/krb5 seems to be stable. So
the error sits in krb5p. Any hints?
Thank you
Olaf
___
CentOS mailing list
CentOS@centos.
Paul Heinlein wrote:
> I don't know if it's a bug or a feature, but the
> filesystem-2.4.0-2.el5.centos rpm won't upgrade cleanly if /home is an
> NFS filesystem.
No problem here, /home is exported as nfs4 with sec=kerb5.
regards
Olaf
___
CentOS maili
Hello,
if running 'yum update' on a CentOS 5.3 workstation, that was upgraded
from CentOS 5.2, I run into the following error with perl.
[...]
Resolving Dependencies
--> Running transaction check
---> Package perl.i386 4:5.8.8-18.el5_3.1 set to be updated
Traceback (most recent call last):
File
Jim Perrin wrote:
Hello,
> On Fri, Apr 3, 2009 at 7:10 AM, Olaf Mueller
> wrote:
>> if running 'yum update' on a CentOS 5.3 workstation, that was
>> upgraded from CentOS 5.2, I run into the following error with perl.
> [...] It could also be a corrupted pack
Ralph Angenendt wrote:
Hello.
> Olaf Mueller wrote:
>> File "/usr/lib/python2.4/site-packages/yum/sqlitesack.py", line 94,
>> in
>> _read_db_obj
>> setattr(self, item, _share_data(db_obj[item]))
>> TypeError: unsubscriptable object
>
>
Rob Kampen wrote:
Hello,
nfs4 with kerberos works fine here on CentOS 5.6.
> change exports to
>[...]gss/krb([...]
>[...]gss/krb([...]
My /etc/exports says '... gss/krb5(...'.
And 'SECURE_NFS="yes"' is set in /etc/sysconfig/nfs.
All needed services are running?
- rpcsvcgssd (server)
- rpcidmapd
Michael D. Berger wrote:
> On Tue, 06 Sep 2011 08:10:51 -0700, James A. Peltier wrote:
>> create it with the contents I listed and reboot. If running SELinux
>> in enforcing mode you may need to run restorecon on it.
> Done, still no action. Note that at present, ifconfig does
> not list wlan0.
Hello,
I am using a self compiled kde-3.5.10 from ftp.kde.org as a desktop
system under CentOS 5.4. Does anybody knows where to get a
cve-2010-0436 patch (kdebase, kdm) for kde-3.5.10?
Thanks!
regards
Olaf
___
CentOS mailing list
CentOS@centos.org
htt
Gary Greene wrote:
> On 4/21/10 12:15 PM, "Olaf Mueller" wrote:
>> [...] Does anybody knows where to get a
>> cve-2010-0436 patch (kdebase, kdm) for kde-3.5.10?
> All security patches for KDE can be found at
> ftp://ftp.kde.org/pub/kde/security_patches/
This i
Ned Slider wrote:
Hello Ned,
> Olaf Mueller wrote:
>> [...] Does anybody knows where to get a
>> cve-2010-0436 patch (kdebase, kdm) for kde-3.5.10?
> Maybe use the same patch Red Hat have backported into the distro
> package as your starting point:
> $ rpm -q --changelo
1 - 100 of 102 matches
Mail list logo
