On 5/6/20 12:49 AM, Peter Kjellström wrote:
On Wed, 6 May 2020 00:00:48 + (UTC)
Chris Olson via CentOS wrote:
We located an application recommended by one of customers
for sharing certain data. It was available for installation
using a few different methods. Using yum was also recommend
Hello all--
I'm in a bind trying to reset an older Nether DSL modem. I did a manual
reset on it. It was set up as "pass thru" by me and I want to "undo" that.
When I boot now, the joys of Network Manager!, I can not just enter the
modem manager IP address because I keep getting "network not accessi
On Sun, Jul 12, 2020, 12:31 Mauricio Tavares wrote:
> On Sun, Jul 12, 2020 at 3:15 PM Kay Schenk wrote:
> >
> > Hello all--
> > I'm in a bind trying to reset an older Nether DSL modem. I did a manual
> > reset on it. It was set up as "pass thru" by
See inline...
On Sun, Jul 12, 2020, 12:47 Mauricio Tavares wrote:
> On Sun, Jul 12, 2020 at 3:39 PM Kay Schenk wrote:
> >
> > On Sun, Jul 12, 2020, 12:31 Mauricio Tavares
> wrote:
> >
> > > On Sun, Jul 12, 2020 at 3:15 PM Kay Schenk
> wrote:
> > >
On Mon, Jul 13, 2020, 02:35 José María Terry Jiménez
wrote:
> El 13/7/20 a las 0:50, Kay Schenk escribió:
> >> With your current setup in mind, do you know the modem internal
> >> IP? With that, set your computer's IP to be in the same network,
> >> verif
Totally and completely on my HP microfiber. Wouldn't get past anything to
even get me into the grub menu. NOT AMUSED!
_______
Kay Schenk
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
Well misery loves company but still...just truly unfathomable!
Time for a change.
___
Sent from MzK's phone.
On Sat, Aug 1, 2020, 13:04 david wrote:
> At 12:50 PM 8/1/2020, Kay Schenk wrote:
> >Totally and completely on my HP microfiber. Wouldn't g
centos@centos.org>:
> >>
> >> Am 01.08.20 um 23:41 schrieb Kay Schenk:
> >>> Well misery loves company but still...just truly unfathomable!
> >>> Time for a change.
> >>
> >>
> >> I can only express my incomprehens
recently.
>
> I'm very leary about rebooting either, now, though.
>
>
>
> On Sat, Aug 1, 2020 at 12:50 PM Kay Schenk wrote:
>
> > Totally and completely on my HP microfiber. Wouldn't get past anything to
> > even get me into the grub menu. NOT AM
the grub2 team messed up. See
>
>
> https://www.zdnet.com/article/boothole-fixes-causing-boot-problems-across-multiple-linux-distros/
>
> Mike
>
> On 8/1/2020 6:11 PM, Marc Balmer via CentOS wrote:
> >
> >
> >> Am 01.08.2020 um 23:52 schrieb Leon Fauster vi
Hello all--
These instructions are somewhat OK but my messed up box is the only one
I've got basically to help with this problem.
Where can we find "correction" instructions using a "rescue" CD or flash
drive? I understand RedHat provided detailed instructions to supported
customers.
Thanks.
___
Thanks Greg! Very clear!
___
Sent from MzK's phone.
On Sun, Aug 2, 2020, 14:07 Gregory P. Ennis wrote:
> Hello all--
> These instructions are somewhat OK but my messed up box is the only one
> I've got basically to help with this problem.
>
> Where can we find "correction" i
Hello folks --
I recently got a new laptop and installed CentOS8 on it. Yes, it's a
learning curve. What I am really upset/disappointed with is the "new"
gnome-software application. It doesn't provide nearly the functionaility
of the older gnome 3.28 app. Yes, I do know how to list EVERYTHING
Hello again...
After more searching today, I think gnome-packagekit will do what I
need/want.
Bye for now...
On 10/23/20 9:49 AM, Kay Schenk wrote:
Hello folks --
I recently got a new laptop and installed CentOS8 on it. Yes, it's a
learning curve. What I am really upset/disappointed
Hello all--
I have 3 CentOs 8 kernels insalled on my new machine --
1. 4.18.0-193.14.2.el8_2.x86_6
2. 4.18.0-193.19.1.el8_2.x86_64 << using this one for this graphical boot
3. 4.18.0-193.28.1.el8_2.x86_64
Only #3 will boot without a *Virtual console can not start *error
message but it hangs
Please disregard this message. My additional muckings seem to have more
or less fixed this including NOT saving journal files and using X to
start gdm instead of Wayland.
On 11/14/20 1:39 PM, Kay Schenk wrote:
Hello all--
I have 3 CentOs 8 kernels insalled on my new machine --
1. 4.18.0
Hello all--
I recently did a bulk update from 8.2 to 8.3. I am having some odd issues
with it not recognizing my NVIDIA Quadro P1X00 graphics card properly. In
graphical mode, it only shows ONE display resolution and also my system can
not find firmware --
intel/sof/sof-cml.ri
Any idea about what t
ort a bug in CentOS bugzila.
>
> On 12/9/20 11:06 PM, Kay Schenk wrote:
> > Hello all--
> > I recently did a bulk update from 8.2 to 8.3. I am having some odd issues
> > with it not recognizing my NVIDIA Quadro P1X00 graphics card properly. In
> > graphical mode, it onl
On 12/11/20 12:23 AM, Gordon Messmer wrote:
On 12/10/20 6:28 PM, Konstantin Boyandin via CentOS wrote:
Allow me to disagree. We both trust Chris Wright's words, don't we? CTO
won't lie. Citing him:
"To be exact, CentOS Stream is an upstream development platform for
ecosystem developers. It wil
Hello all --
I switched to Stream yesterday hoping it would fix some issues I'd been
having with CentOS 8.4 but alas it did not.
I started out installing 8.2, maybe kernel 4.18.0 -147?, on my laptop
about 2 months or so ago and the sound worked fine. Now, it does not. I
seem to be running in
gt;
etc...
This kept my existing alsa main in tact and just added the firmware files.
Now on to other issues -- playing .wav files without benefit of GUI.
On 12/21/20 10:08 AM, Kay Schenk wrote:
Hello all --
I switched to Stream yesterday hoping it would fix some issues I'd
been having
Hello all--
All good in the Stream for me. :)
Because Stream will tend to be more "forward moving" than previous
CentOS releases, is it still OK to set up EPEL as a repo? So far, I've
only installed terminus fonts from CentOS 8 EPEL, but I'm just wondering
about this. Generally, are there any
The problem. I can NOT change my screen resolution from GUI. I boot to
multi-user, then get "into" graphical.
First, some background.
My original install of CentOS 8 -- maybe 8.2? -- about 3 months ago --
went pretty well but I kept having lockup issues. No issues with
graphics using intel gr
On 1/10/21 9:40 PM, Anthony K wrote:
On 11/1/21 8:33 am, Kay Schenk wrote:
. . .
From messages I've seen on this problem, the lack of
/dev/dri/card0
is the crux of the issue but I have NO idea of how it gets created.
So, right now I'm stuck at a default resolution of 1024 x 7
On 1/14/21 3:02 PM, Kay Schenk wrote:
On 1/10/21 9:40 PM, Anthony K wrote:
On 11/1/21 8:33 am, Kay Schenk wrote:
. . .
From messages I've seen on this problem, the lack of
/dev/dri/card0
is the crux of the issue but I have NO idea of how it gets created.
So, right now I'm s
Thanks for the info! I will pass it along!
On 1/20/21 7:02 AM, J Martin Rushton via CentOS wrote:
See:
https://arstechnica.com/gadgets/2021/01/centos-is-gone-but-rhel-is-now-free-for-up-to-16-production-servers/
and
https://www.redhat.com/en/blog/new-year-new-red-hat-enterprise-linux-programs
On 1/21/22 06:23, Johnny Hughes wrote:
On 1/21/22 07:53, Johnny Hughes wrote:
On 1/21/22 07:17, Johnny Hughes wrote:
On 1/21/22 05:01, Leon Fauster via CentOS wrote:
Am 20.01.22 um 23:14 schrieb Johnny Hughes:
On 1/20/22 15:07, Johnny Hughes wrote:
On 1/20/22 12:46, Johnny Hughes wrote:
On
Hello folks --
Is there any write up for the most recent update to kernel 4.18.0-373
specifically with respect to sound setup or anything really? I had been
using an "alpha" driver for my Intel sound that was appended to my boot
line up until this latest. This not only did not work but caused
nel
follows the published version pretty closely, so for example right now I'm
running 5.17.3 on my el8 boxes. The newer kernels solve a lot of hardware
issues.
On Tue, Apr 19, 2022 at 5:54 PM Kay Schenk wrote:
Hello folks --
Is there any write up for the most recent update to kernel 4.1
but I didn't know what the
syntax would be.
In any case, posting more info in case anyone needs it.
On 4/20/22 10:54, Kay Schenk wrote:
Thank you Joshua. If I can't get this resolved by the end of this
week, I'll use your suggestion.
On 4/19/22 15:32, Joshua Kramer wrote:
ycles, etc., I
think I'm good now.
On 4/21/22 09:29, Johnny Hughes wrote:
On 4/20/22 16:16, Kay Schenk wrote:
Hi Joshua, and list...
I got the non-workng sound driver for Intel HDA fixed with my kernel
4.18.0-373.
After removing the extra kernel flag i915_alpha from my command
kernels still valid?
https://linuxtut.com/en/1f14678e24748d4683c9/
On 4/20/22 14:16, Kay Schenk wrote:
Hi Joshua, and list...
I got the non-workng sound driver for Intel HDA fixed with my kernel
4.18.0-373.
After removing the extra kernel flag i915_alpha from my command line
(see instructions
-editenv-rhel-8/
that grub2-mkconfig which I find easier has some issues ... 🙁
I'll try again.
Thanks.
On 4/23/22 08:02, Johnny Hughes wrote:
On 4/22/22 16:57, Kay Schenk wrote:
more info...and GADS! my kernel line change to kernel 4.18.0-373 is
NOT THERE today!
I did NOT use my former w
inline...
On 4/21/22 09:29, Johnny Hughes wrote:
On 4/20/22 16:16, Kay Schenk wrote:
Hi Joshua, and list...
I got the non-workng sound driver for Intel HDA fixed with my kernel
4.18.0-373.
After removing the extra kernel flag i915_alpha from my command line
(see instructions when this
If I choose to do a fresh install of CentOS 6 with "replace existing
Linux systems", will it also wipe out my /home directory? In the past
when I've done this with another Linux distro, /home was not affected.
Or, would I need to do "fresh" install and then muck with partitioning
using a Custom La
On 06/07/2015 03:25 PM, Gregory P. Ennis wrote:
> On Sun, 2015-06-07 at 15:16 -0700, Kay Schenk wrote:
>> If I choose to do a fresh install of CentOS 6 with "replace existing
>> Linux systems", will it also wipe out my /home directory? In the past
>> when I've
On 06/07/2015 04:52 PM, g wrote:
>
>
> On 06/07/2015 05:29 PM, Kay Schenk wrote:
>> On 06/07/2015 03:25 PM, Gregory P. Ennis wrote:
> <<<>>>
>
>>> Yes it does replace your home directory. When I do a fresh
>>> install, I back up m
On 06/07/2015 10:11 PM, Peter wrote:
> On 06/08/2015 12:25 PM, Kay Schenk wrote:
>> My situation is I have 7 separate Linux partitions and a swap area. One
>> of the partitions is /home, so it's already in its own partition.
>> I want to keep the partitions for CentOS
On 06/07/2015 11:05 PM, g wrote:
>
>
> On 06/07/2015 07:25 PM, Kay Schenk wrote:
> <<>>
>
>> So, I'm not sure how to interpret what you said. Can I get the same
>> results from a CentOS install using some combination of options?
>
> because
On 06/08/2015 02:00 PM, g wrote:
>
>
> On 06/08/2015 11:34 AM, Kay Schenk wrote:
>> On 06/07/2015 11:05 PM, g wrote:
>>> On 06/07/2015 07:25 PM, Kay Schenk wrote:
>>> <<>>
>>>
>>>> So, I'm not sure how to interpret what you
On 06/08/2015 06:29 PM, Peter wrote:
> On 06/09/2015 12:19 PM, John R Pierce wrote:
>> On 6/8/2015 5:08 PM, g wrote:
>>> ie, partition for boot, partition for swap, partition for /, partition
>>> home, partition for usr, partition for var, partition for home2,
>>> partition for what ever.
>>
>>
>
OK, after 3 tries I got CentOS 6.6 installed (don't ask). Now something
very odd is happening. My regular user, me, can not login to level 3
without odd errors.
I get /home/ not found when it's there and setup with correct
permissions -- well here I am using it in run level 5 just fine!
So, my n
On 06/10/2015 10:06 PM, Gordon Messmer wrote:
> On 06/10/2015 05:25 PM, Kay Schenk wrote:
>> I get /home/ not found when it's there and setup with correct
>> permissions -- well here I am using it in run level 5 just fine!
>
> Log in as root, and watch /var/log/mess
On 06/11/2015 08:28 AM, m.r...@5-cent.us wrote:
> Kay Schenk wrote:
>> On 06/10/2015 10:06 PM, Gordon Messmer wrote:
>>> On 06/10/2015 05:25 PM, Kay Schenk wrote:
>>>> I get /home/ not found when it's there and
>>>> setup with correct permissions
I did some research and see a LOT of folks would love to get rid of
their .xsession-errors file and I'm in the opposite situation -- where
is mine? Do I have to install or enable something special to get this back.
All my users are starting X with startx and the default .xinitrc. Is
this the probl
My Update Applet keeps giving me messages to install an update to a
package I do not have installed. To make matters more confusing, when I
actually try to install the package it wants to update, there is a
problem with the installation.
Any tips on how to resolve this? Is this somehow caused by
On 07/01/2015 02:12 PM, John R Pierce wrote:
> On 7/1/2015 2:02 PM, Kay Schenk wrote:
>> My Update Applet keeps giving me messages to install an update to a
>> package I do not have installed. To make matters more confusing, when I
>> actually try to install the package it w
On 07/02/2015 03:11 AM, John R Pierce wrote:
> On 7/1/2015 2:35 PM, Kay Schenk wrote:
>> OK, here ya go --
>>
>> Obsoleting Packages
>>
>> perl-IO-Compress.noarch 2.052-1.el6.rfx rpmforge-extras
>> perl-IO-Compress-Bzip2.i686 2.021-136.el6_6.1 @updates
>
Hello all--
I am trying to determine what I have isntalled from a given repository.
I have seen several references to "yum repo-pkgs" which I think is what
would work for me, but "repo-pkgs" does not seem to be a part of
yum 3.2.29. Is this a yum add on that I could get somewhere?
--
-
ersion of yum does NOT have the repo-pkgs
command.
>>
>> Where "base" can be anyh repoid that you have installed.
>>
>> -Original Message-
>> From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On
>> Behalf Of Kay Schenk
>> Se
On 07/29/2015 10:23 AM, Digimer wrote:
> On 29/07/15 12:45 PM, Karanbir Singh wrote:
>> hi everyone,
>>
>> I know this update has been a bit delayed, things have been pretty
>> hectic. But lots of good updates for everyone:
>>
>> Distro
>>
>> * Updates for CentOS Linux 5/7 : All updates
OK, I need to start with a basic "dumb" question. What named xorg
version does my package version 1.15 correspond to? X11R7.?
Currently, I'm having some bad flicker problems I didn't experience
previously. I have an old old radeon graphics card and note that the ati
driver was updated with 6.7. Th
On 08/17/2015 03:33 PM, Gordon Messmer wrote:
> On 08/17/2015 01:55 PM, Kay Schenk wrote:
>> OK, I need to start with a basic "dumb" question. What named xorg
>> version does my package version 1.15 correspond to? X11R7.?
>
> X11r7.7, I think.
> http://www.x.or
On 08/21/2015 11:44 AM, Frank Cox wrote:
> On Fri, 21 Aug 2015 11:51:27 -0500 (CDT)
> Gilbert Sebenste wrote:
>
>> On Fri, 21 Aug 2015, Eero Volotinen wrote:
>>
>> Hello Eero,
>>
>>> Well, is it really supported on Linux? I can't find driver for it on:
>>> http://www.openprinting.org/printers
>
On 08/21/2015 12:16 PM, Gilbert Sebenste wrote:
> On Fri, 21 Aug 2015, Fred Smith wrote:
>
I just saw that. I now have it so that it prints a few pages, then
locks
up the printer. Funny, it worked just fine under CentOS5, now under
CentOS
6, it won't? That's weird. Do yo
On 08/24/2015 08:34 AM, Gilbert Sebenste wrote:
> On Fri, 21 Aug 2015, Gilbert Sebenste wrote:
>
>> On Fri, 21 Aug 2015, Kay Schenk wrote:
>>
>>>>>> Have you tried different printer drivers other than the one that's
>>>>>> "r
Well I haven't tested out the CentOS 7 for i386 yet as sent in the
message of 06/02--
https://lists.centos.org/pipermail/centos-devel/2015-June/013426.html
Nor have I seen any additional information. So how is this going?
I'm almost ready to jump in as I would really prefer to be on Gnome 3.
--
On Wed, Oct 7, 2015 at 6:21 AM, Johnny Hughes wrote:
> On 10/06/2015 05:30 PM, Kay Schenk wrote:
> > Well I haven't tested out the CentOS 7 for i386 yet as sent in the
> > message of 06/02--
> >
> > https://lists.centos.org/pipermail/centos-devel/2015-June/013426.
Hello all --
This is not a CentOS specific question, but I have a feeling some of you
are involved in enterprise malware efforts, so here goes.
Does anyone have recommendations for malware detection that includes
detection in image files? I'm looking for something that could be
integrated into a
On 11/02/2015 01:56 AM, Arpita Mallick wrote:
> I am using cent OS 6.7 andI have installed omnet++ 4.6 on it.When
> I am trying to create a new omnet++ project then suddenly omnet++
> window is terminating and an error message is showing as "A
> problem in the Java-1.7.0-openjdk-1..7.0.85-2.6.1.3e
On 01/24/2016 11:46 PM, Alice Wonder wrote:
> On 01/24/2016 11:31 PM, Sorin Srbu wrote:
>>> -Original Message-
>>> From: centos-boun...@centos.org
>>> [mailto:centos-boun...@centos.org] On
>>> Behalf Of John Hodrien
>>> Sent: den 24 januari 2016 12:47
>>> To: CentOS mailing list
>>> Cc: M
On 01/27/2016 08:02 AM, m.r...@5-cent.us wrote:
> Sylvain CANOINE wrote:
>>> De: "Jonathan Billings"
>
>>> Maybe you're not aware of it, but there are a LOT of things that
>>> systemd fixes that people are happy about.
>
>> Like what ? I don't remember there were as many errors to fix before
>
...and this includes the "Help". What am I missing?
Thanks.
--
--
MzK
"Every new beginning comes from some other
beginning's end."
-- "Closing Time"
Semisonic
___
CentOS mai
ooops! Forgot some details...
Gnome/Nautlus 2.28 on CentOS 6.9--32 bit
On 05/28/2017 10:39 AM, Kay Schenk wrote:
...and this includes the "Help". What am I missing?
Thanks.
--
--
MzK
"Every new beginning comes from some other
We could use some additional details.
* what version of CentOS 6
* what is your desktop GUI -- gnome or ?
* what apps are you attempting to use with audio?
I have CentOS 6.9 installed with pulse-audio and my gnome 2 desktop, and
everything works well with this environment. I pretty much always t
On 03/16/2018 10:09 AM, Nicolas Kovacs wrote:
Le 16/03/2018 à 14:29, Leon Fauster a écrit :
We use a DIGITUS USB2Serial Converter (Prolific based USBID: VID:067B PID:2303)
and then
screen /dev/DEVICE 115200
Thanks everybody for your numerous suggestions. As soon as I have the
hardware, I'l
Hello all --
Does anyone know where I can find GnuPG 2.0.16 for CentOS 6.9 32-bit?
I've already looked in the normal repos.
I have 2.0.14 now and my Enigmail addon has stopped working.
Thanks.
--
--
MzK
"Ring out the false, ring in the true."
-- poem
On Mon, Apr 2, 2018 at 8:31 PM, Karl Vogel wrote:
> >> On Thu, 29 Mar 2018 10:53:05 -0700,
> >> Kay Schenk said:
>
> K> Does anyone know where I can find GnuPG 2.0.16 for CentOS 6.9 32-bit?
>
>Do you want something that old? 2.0.17 came out in 2011. I run
On Tue, May 1, 2018 at 8:18 AM, Nicolas Kovacs wrote:
> Le 01/05/2018 à 13:58, Nicolas Kovacs a écrit :
> > The printer and the scanner worked perfectly for some time.
> >
> > Now all of a sudden scanning won't work anymore, and I have an alert
> > that the HP plugin must be installed.
>
> After
On Sun, Jul 15, 2018 at 12:13 PM, Leon Fauster via CentOS wrote:
> Am 15.07.2018 um 20:03 schrieb Nicolas Kovacs :
> >
> > Le 15/07/2018 à 19:49, Matthew Phelps a écrit :
> >> This is a known issue. See
> >> https://bugzilla.redhat.com/show_bug.cgi?id=1596852 for a patch to the
> >> /usr/bin/fire
When I start FF from command line, I'm getting a lot of errors similar to
these --
Gtk-Message: Failed to load module "canberra-gtk-module"
Gtk-Message: Failed to load module "pk-gtk-module"
Gtk-Message: Failed to load module "canberra-gtk-module"
Gtk-Message: Failed to load module "pk-gtk-module"
Yet another issue with this new browser.
If I look at a web page and try to print it to a file, FF crashes.
CentOS 6.10
Going back to FF 52.8. This new version is just unworkable for me.
--
--
MzK
"Less is MORE."
On Mon, Jul 16, 2018 at 5:36 AM, James Pearson
wrote:
> Kay Schenk wrote:
> >
> > When I start FF from command line, I'm getting a lot of errors similar to
> > these --
> >
> > Gtk-Message: Failed to load module "canberra-gtk-module"
> > Gtk-
Hello all--
I can't seem to find a way to search the archives of this list right now
though I DO remember doing that in the past. Any ideas? Thanks.
-- Kay
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On 10/28/2018 02:10 PM, Albert McCann wrote:
-Original Message-
From: CentOS [mailto:centos-boun...@centos.org] On Behalf Of Larry
Martell
Sent: Sunday, October 28, 2018 4:11 PM
To: CentOS mailing list
Subject: [CentOS] IBM buying RedHat
https://www.cnbc.com/2018/10/28/ibm-is-reportedly
On 11/03/2018 06:41 AM, Alice Wonder wrote:
On 11/03/2018 01:22 AM, Nicolas Kovacs wrote:
Le 02/11/2018 à 21:19, mark a écrit :
Odd, I've never had that problem. On the other hand, I *really* dislike
gnome. I think their target is 16 yr olds.
My reaction to GNOME 3 has been roughly the same
What can anyone tell me about the polkit-gnome package that came with
CentOS 7.5? Looking at the Fedora pack for the same, it seems like I'm
missing pieces of this package.
Re:
https://rpmfind.net/linux/RPM/epel/7/x86_64/Packages/p/polkit-gnome-0.106-0.1.20170423gita0763a2.el7.x86_64.html
I
... and causing me great concern at the moment.
I've got a notification of 673 Software updates at the moment. I didn't
see anything on this list that indicated that kind of update.
Unfortunately, the "Details" option which would normally show me what
repo is providing the updates, does not se
On Tue, Nov 20, 2018 at 10:08:15AM -0800, Kay Schenk wrote:
... and causing me great concern at the moment.
I've got a notification of 673 Software updates at the moment. I didn't see
anything on this list that indicated that kind of update. Unfortunately, the
"Details" option whi
On 11/20/2018 05:35 AM, Johnny Hughes wrote:
On 11/19/2018 01:38 AM, Nicolas Kovacs wrote:
Le 18/11/2018 à 15:14, Yan Li a écrit :
The recommended method for undo an update is
https://access.redhat.com/solutions/64069, but it's not supported if glibc,
kernel, or selinux are changed. I'd give i
On 11/21/18 9:14 AM, Kay Schenk wrote:
On 11/20/2018 05:35 AM, Johnny Hughes wrote:
On 11/19/2018 01:38 AM, Nicolas Kovacs wrote:
Le 18/11/2018 à 15:14, Yan Li a écrit :
The recommended method for undo an update is
https://access.redhat.com/solutions/64069, but it's not supported if
Hello all.
I'm in the midst of trying to transfer a G+ community to something else.
I came across this site--
https://blog.friendsplus.me/export-google-plus-feeds-45926c925891
that actually has an advanced "exporter" app but it is an ".appimage"
app. I am not familiar with this at all and wa
Hello all --
I run a hard wired network connection from my box and I don't want/need any
wifi connections trying to get to/from it. I came across this article from
the RedHat Bugzilla site --
https://bugzilla.redhat.com/show_bug.cgi?id=1530391
I would love to just uninstall NetworkManager-wifi a
Hee hee hee... :-)
"And in the end, only kindness matters."
-- Jewel, "Hands"
__
MzK
On 7/30/19 10:14 AM, mark wrote:
Well, we knew the 'Net was invented solely for cute cat pictures. Now I
have proof that selinux is part of that conspiracy. From dmesg, on one of
my servers:
[ 3366.091
Can't help with the mystery port 48825. But I find your approach truly
creative!
-- Kay
On 8/1/19 8:53 PM, Fred Smith wrote:
I know this is OT, but I'm not sure where else to ask. I can hope for
fogiveness! :)
My home router sends its logs to the rsyslog on my desktop system, and
from there
On 10/3/19 12:37 PM, Ljubomir Ljubojevic wrote:
On 10/3/19 5:49 PM, Kaushal Shriyan wrote:
Hi,
I will appreciate it if someone can help me understand the differences
between CentOS 7.x and CentOS 8.x OS. I look forward to hearing from you
and thanks in advance.
In short, CentOS 7.x is based
On 10/5/19 7:15 AM, Александр Кириллов wrote:
How to add an application icon to gnome 3 classic desktop on centos 8?
TIA
Using firefox as an example,
cp /usr/share/applications/firefox.desktop $(xdg-user-dir DESKTOP)/
or
ln -s /usr/share/applications/firefox.desktop $(xdg-user-dir DESKTOP)/
On 10/17/19 7:08 AM, Johnny Hughes wrote:
On 9/24/19 2:41 PM, Frank Cox wrote:
Without wanting to sound too pushy, I'm wondering if there is any update on the
status of Mate now that Centos 8 has been released?
I would love to jump on C8 and start playing with it, but the lack of Mate is
ki
I just applied a bunch of updates to my CentOS 7 system yesterday, one
of which was a Firefox update to 68.0.1esr.
Now when I bring up sites I would log in to -- my bank, credit cards,
etc., the Password box is wonky and shakes and doesn't display
successive dots for characters I type, nor do
Apparently, this is a "known" FF issue...
https://support.mozilla.org/en-US/questions/1264837
"And in the end, only kindness matters."
-- Jewel, "Hands"
__
MzK
On 10/24/19 10:19 AM, Kay Schenk wrote:
I just applied a bunch of updates to my CentOS 7 syste
x27;d post it here in case anyone else was making the same mistake.
-- end details --
"And in the end, only kindness matters."
-- Jewel, "Hands"
__
MzK
On 10/26/19 3:09 PM, Kay Schenk wrote:
Apparently, this is a "known" FF issue...
https://support.mozill
on. Discussions
seem confusing on this point.
Thanks for any help.
--
"And in the end, only kindness matters."
-- Jewel, "Hands"
__
Kay Schenk
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On 12/9/19 11:26 AM, Jyrki Tikka wrote:
Am 07.12.19 um 19:23 schrieb Kay Schenk:
Hello all--
It seems using ctrl-alt-F1 to exit from GUI back to MY OWN
SESSION'S
command line does not work for me. It does nothing.
Is this something that needs to be explicitly enabled? I start GUI
On 12/9/19 5:06 PM, Jonathan Billings wrote:
On Dec 9, 2019, at 17:54, Kay Schenk wrote:
Yes, those consoles are available but they are NOT my original text mode login console
which used to be vt1 and is now taken over by Gnome. What they do is bring me to a login
prompt -- this is NOT what
/red_hat_enterprise_linux/7/html/desktop_migration_and_administration_guide/index
"And in the end, only kindness matters."
-- Jewel, "Hands"
__
MzK
On 12/11/19 6:29 AM, Kay Schenk wrote:
On 12/9/19 5:06 PM, Jonathan Billings wrote:
On Dec 9, 2019, at 17:54, Kay Schen
A short update on this problem. I just applied patches to bring FF to
68.3.0esr. The flickering is still there, a bit, but at least I can input
COMPLETE passwords when prompted. Oddly the flickering now seems to be more
site dependent than previously.
On Thu, Oct 24, 2019 at 10:19 AM Kay Schenk
Hello all--
I kept getting messages that my old Flash Player 31 was obsolete so I
went in search of an update.
I came across several references for getting flash plugin 32 that
basically were the same as this page --
https://www.if-not-true-then-false.com/2010/install-adobe-flash-player-10-
A GREAT MYSTERY! See inline...
On 1/16/20 1:00 PM, m...@tdiehl.org wrote:
On Thu, 16 Jan 2020, Steve Clark wrote:
On 01/16/2020 03:30 PM, Chris Adams wrote:
Once upon a time, Kay Schenk said:
I kept getting messages that my old Flash Player 31 was obsolete so
I went in search of an update
only kindness matters."
-- Jewel, "Hands"
__
MzK
On 1/16/20 2:40 PM, Kay Schenk wrote:
A GREAT MYSTERY! See inline...
On 1/16/20 1:00 PM, m...@tdiehl.org wrote:
On Thu, 16 Jan 2020, Steve Clark wrote:
On 01/16/2020 03:30 PM, Chris Adams wrote:
Once upon a time, Kay S
On 2/11/20 5:18 AM, Simon Matter via CentOS wrote:
James Pearson wrote:
J Martin Rushton via CentOS wrote:
On 16/01/2020 20:37, Steve Clark wrote:
On 01/16/2020 03:30 PM, Chris Adams wrote:
Once upon a time, Kay Schenk said:
I kept getting messages that my old Flash Player 31 was obsolete
1 - 100 of 130 matches
Mail list logo
