5.7 32bit server system (headless coloc server), long running, long time
stable. I need the flac utils...
[root@freescruz ~]# rpm -qa |grep flac
(nothing installed)
[root@freescruz ~]# yum install flac-devel
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile
On 10/12/11 12:09 AM, John R Pierce wrote:
> --> Missing Dependency: flac = 1.1.2-28.el5_0.1 is needed by package
well, odd, I ran it again and it worked. WTF?
--
john r pierceN 37, W 122
santa cruz ca mid-left coast
Hi,
This is a Centos 5.5 host with one xen guest.
About 2 weeks ago, the host randomly lost network connection. By
this I mean I could not connect to the services on it, or ping it.
Also was the status of the guest.
From serial console, I connected to the host, trying to see what
happened. No
Hello Joesph,
i am a gentoo child.
So, do i have to download latest drbd source package,
then untar , and do this =
{ If you are about to build RPMs for both the DRBD userspace utilities
and the kernel module, use: }
$ ./configure --enable-spec --with-km
$ make tgz
$ cp drbd*.tar.gz `rpm -E _s
Sir,
Yes i have tried with Cheese Application and its not detected my
camera and its shows "No Camera"
Regards
-S.Balaji
On 10/11/2011 8:10 PM, Andreas Reschke wrote:
> centos-boun...@centos.org schrieb am 11.10.2011 21:54:40:
>
>> balajisundar
>> Gesendet von: centos-boun...@centos.org
>>
Vreme: 10/12/2011 09:40 AM, John R Pierce piše:
> On 10/12/11 12:09 AM, John R Pierce wrote:
>>--> Missing Dependency: flac = 1.1.2-28.el5_0.1 is needed by package
>
> well, odd, I ran it again and it worked. WTF?
>
>
>
I do not see any flac-devel packages in Repoforge, only in
Atrpms-test
Vreme: 10/12/2011 10:44 AM, balajisundar piše:
> Sir,
>
> Yes i have tried with Cheese Application and its not detected my
> camera and its shows "No Camera"
>
> Regards
> -S.Balaji
>
Can please avoid top-posting (writing at the begining?) Norm here is to
write bellow the written tekst. And
On Wednesday 12 October 2011 03:43, the following was written:
> Hi,
>This is a Centos 5.5 host with one xen guest.
>About 2 weeks ago, the host randomly lost network connection. By
> this I mean I could not connect to the services on it, or ping it.
> Also was the status of the guest.
Hi.
Thanks I have managed to fix the issue.
Rather than modify a Fedora src.rpm - I used a Centos6 one.
I also changed the lines in the .spec file from
-
%build
# aclocal workaround - to be improved
cat `aclocal
--print-ac-dir`/{libtool,ltoptions,ltsugar,ltversion,lt~obsolete}.m4
>
Vreme: 10/12/2011 07:10 AM, Karanbir Singh piše:
> Hi,
>
> On 10/11/2011 06:23 PM, Ljubomir Ljubojevic wrote:
>> I do not have to read it (although I understood you the first time). My
>
> its strange then you feel compelled to comment on something without
> making an effort to even see what the ot
Am 11.10.2011 11:27, schrieb Marko Weber:
> Do i have to enable the epel-test repo to get itß
> But test sounds not stable for me and we switched to centos for
> stability.
>
> anyone here can help me or give me any hints on drbd on centos 6?
>
> Do i have to compile by hand?
No, use elrepo, do n
Vreme: 10/12/2011 11:58 AM, Robert Spangler piše:
> On Wednesday 12 October 2011 03:43, the following was written:
>
> I am no expert but it sounds like you might be in the early stages of hardware
> failure.
>
> Next time this system stop responding check the following:
>
> 1. System interface sta
On Wed, Oct 12, 2011 at 12:12:43AM -0500, Karanbir Singh wrote:
> Hi,
>
> On 10/11/2011 03:57 PM, fred smith wrote:
> > http://debuginfo.centos.org/6 exists, but is empty. Does anyone
> > here know when or even if it will ever be populated?
>
> We are shifting the debuginfo stuff around, its take
Hi Ljubomir,
i am completely confused now.
With elrepo u dont mean "epel.repo" or?
How do i enable this "elrepo" in Centos?
marko
Am 12.10.2011 12:16, schrieb Ljubomir Ljubojevic:
> Vreme: 10/12/2011 07:10 AM, Karanbir Singh piše:
>> Hi,
>>
>> On 10/11/2011 06:23 PM, Ljubomir Ljubojevic wrot
From: Marko Weber
> i am completely confused now.
> With elrepo u dont mean "epel.repo" or?
> How do i enable this "elrepo" in Centos?
Google 'elrepo' and it is the first answer...
JD
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/m
Marko Weber wrote:
> i am completely confused now.
> With elrepo u dont mean "epel.repo" or?
> How do i enable this "elrepo" in Centos?
http://lmgtfy.com/?q=elrepo&l=1
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/ce
hello ,
i have to an remote server contact via rescue console.
How can i install centos there without any image or cd?
with gentoo i untar a stage3 tarball and latest portage , baking kernel
- go! (shortversion)
but how to do this with centos?
i gooled last hour but only find howtos with cd / d
http://evcz.tk/blog/2008/10/21/remote-centos-install/
works with centos 4 / 5 / 6 and fedora
Am 12.10.11 16:48, schrieb Marko Weber:
>
> hello ,
> i have to an remote server contact via rescue console.
> How can i install centos there without any image or cd?
>
> with gentoo i untar a stage3 tarb
Juergen Gotteswinter wrote:
> Am 12.10.11 16:48, schrieb Marko Weber:
>>
>> i have to an remote server contact via rescue console.
>> How can i install centos there without any image or cd?
> http://evcz.tk/blog/2008/10/21/remote-centos-install/
>
> works with centos 4 / 5 / 6 and fedora
Please d
On 10/12/11 2:24 AM, Ljubomir Ljubojevic wrote:
> I do not see any flac-devel packages in Repoforge, only in
> Atrpms-testing. Do you have it enabled?
its in CentOS-Base
it was late at night last night, but after posting that first message, I
realized I'd yum upgraded the system from ~ 5.4 to 5.
What's the right way to set up >2TB partitions for raid1 autoassembly?
I don't need to boot from this but I'd like it to come up and mount
automatically at boot.
--
Les Mikesell
lesmikes...@gmail.com
___
CentOS mailing list
CentOS@centos.org
http
we have CENTOS 5.X on server A and Server B. Both servers have Gigabit network
card connect to same switch.
I test network speed from Server A to Server B and found speed much difference:
SFTP: 42 MB/Sec
SCP:20 MB/sec
SCP command: scp -Crp -o CompressionLevel=1 user1@ServerB:/TMP/File1
On 10/12/11 8:48 AM, Les Mikesell wrote:
> What's the right way to set up>2TB partitions for raid1 autoassembly?
> I don't need to boot from this but I'd like it to come up and mount
> automatically at boot.
disks 2TB and up have to be formatted as GPT rather than MBR, so old MBR
tools like fdi
On 10/12/11 9:07 AM, mcclnx mcc wrote:
> we have CENTOS 5.X on server A and Server B. Both servers have Gigabit
> network card connect to same switch.
>
> I test network speed from Server A to Server B and found speed much
> difference:
>
> SFTP: 42 MB/Sec
>
> SCP:20 MB/sec
>
> SCP command
On Wed, Oct 12, 2011 at 11:09 AM, John R Pierce wrote:
>> What's the right way to set up>2TB partitions for raid1 autoassembly?
>> I don't need to boot from this but I'd like it to come up and mount
>> automatically at boot.
>
> disks 2TB and up have to be formatted as GPT rather than MBR, so o
On Wed, Oct 12, 2011 at 12:14 PM, Les Mikesell wrote:
> On Wed, Oct 12, 2011 at 11:09 AM, John R Pierce
> wrote:
>
> >> What's the right way to set up>2TB partitions for raid1 autoassembly?
> >> I don't need to boot from this but I'd like it to come up and mount
> >> automatically at boot.
> >
On Wed, Oct 12, 2011 at 12:20 PM, David Miller wrote:
> On Wed, Oct 12, 2011 at 12:14 PM, Les Mikesell wrote:
>
>> On Wed, Oct 12, 2011 at 11:09 AM, John R Pierce
>> wrote:
>>
>> >> What's the right way to set up>2TB partitions for raid1 autoassembly?
>> >> I don't need to boot from this but I
On 10/12/11 9:14 AM, Les Mikesell wrote:
> What I'm looking for is the way to make md raid autodetect and
> assemble on boot. With fdisk, you would set the partition type to FD
> for that, but I don't see an equivalent in parted.
set 1 raid on
but I was suggesting forgoing mdraid entirely, and u
On Wed, Oct 12, 2011 at 11:22 AM, David Miller wrote:
>>>
>> With GPT that's set using flags. This is done in parted with the command
>> "set raid on"
>>
>
> I just thought of one other thing. You'll want to read up on bios boot if
> these large drives are being used for the grub boot loader.
>
On Wed, Oct 12, 2011 at 11:24 AM, John R Pierce wrote:
> On 10/12/11 9:14 AM, Les Mikesell wrote:
>> What I'm looking for is the way to make md raid autodetect and
>> assemble on boot. With fdisk, you would set the partition type to FD
>> for that, but I don't see an equivalent in parted.
>
> set
- Original Message -
> From: "Les Mikesell"
> To: "CentOS mailing list"
> Sent: Wednesday, October 12, 2011 9:28:48 AM
> Subject: Re: [CentOS] raid on large disks?
>
> On Wed, Oct 12, 2011 at 11:22 AM, David Miller
> wrote:
> >>>
> >> With GPT that's set using flags. This is done in
On 10/12/11 9:36 AM, Les Mikesell wrote:
> LVM seems unnecessarily complicated unless mdraid is broken on large
> devices. And I already have data on the md partition (moving stuff
> from a pair of 1.5TB drives to 3TB). If md isn't going to work, can I
> put LVM on a single drive, add the data,
I got the IUS installed using the commands but was still unable to upgrade
the php package, any ideas?
root@378907 [/home/ajhalls]# rpm -install epel-release-5-4.noarch.rpm
-install: unknown option
root@378907 [/home/ajhalls]# rpm -ivh epel-release-5-4.noarch.rpm
warning: epel-release-5-4.noarch.r
d...@nkmo.com wrote:
> I got the IUS installed using the commands but was still unable to upgrade
> the php package, any ideas?
I may have missed some previously in this thread, so forgive me if I asked
something that's already been suggested: what's the o/p of
yum list \*php\*
?
mark
__
package name in ius is php53u
eero
12.10.2011 20.15 kirjoitti:
> I got the IUS installed using the commands but was still unable to upgrade
> the php package, any ideas?
>
> root@378907 [/home/ajhalls]# rpm -install epel-release-5-4.noarch.rpm
> -install: unknown option
> root@378907 [/home/ajha
On Wed, Oct 12, 2011 at 11:37 AM, David C. Miller
wrote:
>
>> Not booting from them, but is there a problem with kernel
>> autoassembly
>> on large partitions? I see this in dmsg:
>>
>> md: Autodetecting RAID arrays.
>> md: invalid raid superblock magic on sde1
>> md: sde1 has invalid sb, not imp
Sorry Mark, I started this upgrade project a few days ago and am stepping
back to it now that I have a little more time. I tried the php53u package
like eero suggested but the package could not be found still. I did a "yum
search php" and there aren't ANY packages that start with php, the closest
I
d...@nkmo.com wrote:
> Sorry Mark, I started this upgrade project a few days ago and am stepping
> back to it now that I have a little more time. I tried the php53u package
> like eero suggested but the package could not be found still. I did a "yum
> search php" and there aren't ANY packages that
Vreme: 10/12/2011 05:39 PM, John R Pierce piše:
> On 10/12/11 2:24 AM, Ljubomir Ljubojevic wrote:
>> I do not see any flac-devel packages in Repoforge, only in
>> Atrpms-testing. Do you have it enabled?
>
> its in CentOS-Base
>
> it was late at night last night, but after posting that first message
Vreme: 10/12/2011 08:45 PM, m.r...@5-cent.us piše:
> d...@nkmo.com wrote:
>> Sorry Mark, I started this upgrade project a few days ago and am stepping
>> back to it now that I have a little more time. I tried the php53u package
>> like eero suggested but the package could not be found still. I did
Ljubomir Ljubojevic wrote:
> Vreme: 10/12/2011 08:45 PM, m.r...@5-cent.us pie:
>> d...@nkmo.com wrote:
>>> Sorry Mark, I started this upgrade project a few days ago and am
>>> stepping back to it now that I have a little more time. I tried the
>>> php53u package like eero suggested but the package
This was my response from the yum list.
root@378907 [/etc/yum.repos.d]# yum clean all
Loaded plugins: fastestmirror
Cleaning up Everything
Cleaning up list of fastest mirrors
root@378907 [/etc/yum.repos.d]# yum list *php*
Loaded plugins: fastestmirror
Determining fastest mirrors
* epel: linux.mir
On Wed, Oct 12, 2011 at 12:45:11PM -0700, d...@nkmo.com wrote:
> This was my response from the yum list.
And what does "grep -r exclude /etc/yum*" return? What control panel is
in use?
John
--
For only the good doubt their own goodness,
Vreme: 10/12/2011 09:26 PM, m.r...@5-cent.us piše:
> Ljubomir Ljubojevic wrote:
>> Vreme: 10/12/2011 08:45 PM, m.r...@5-cent.us piše:
>>> d...@nkmo.com wrote:
Sorry Mark, I started this upgrade project a few days ago and am
stepping back to it now that I have a little more time. I tried t
On 10/12/11 11:40 AM, d...@nkmo.com wrote:
> # yum install php53u
> Loaded plugins: fastestmirror
> Loading mirror speeds from cached hostfile
> * epel: linux.mirrors.es.net
> * ius: pancks.sothatswhy.org.uk
> * rpmforge: fr2.rpmfind.net
no Base, Updates ?!?
why are they disabled?
--
jo
d...@nkmo.com wrote:
> This was my response from the yum list.
>
> root@378907 [/etc/yum.repos.d]# yum clean all
> root@378907 [/etc/yum.repos.d]# yum list *php*
| >
Excluding Packages in global exclude list
> Finished
> Available Pa
>
>
>
> On 10/11/11 7:29 AM, Arun Khan wrote:
>>> that requires specific configuration to suit whatever drive interconnect
you have.
>> Does these bays have a connector (+ cable) that is connected to the
>> motherboard or RAID card to control the HDD LEDs in the bay?
>> (sorry if this appea
On Wednesday, October 12, 2011 03:26:03 PM m.r...@5-cent.us wrote:
> > yum list *php*
>
> clean all might be a good idea, but I always use escaped wildcards, so
> there's no chance of shell interaction. Works fine fer me. Here's the
> first bit of what I get:
Incidentally, kmail (for one MUA) re
Vreme: 10/12/2011 11:11 PM, Lamar Owen piše:
> On Wednesday, October 12, 2011 03:26:03 PM m.r...@5-cent.us wrote:
>
>>> yum list *php*
>>
>> clean all might be a good idea, but I always use escaped wildcards, so
>> there's no chance of shell interaction. Works fine fer me. Here's the
>> first bit o
While everyone was right, John got the "Gold Star" award for reminding me
that this server has WHM Cpanel installed on it. So far the control panel
interferes more than it ever helps when I am trying to manually install
packages. Thank you all for your support, I have been very impressed with
the p
On Oct 11, 2011, at 4:02 PM, Ljubomir Ljubojevic wrote:
> Bear in mind that RHEL kernel is not stock kernel,
> there are number of back-ported patches in it. It is safer to use a
> package with applied RHEL specific patches (if necessary) done by people
> working with RHEL kernel regularly.
S
I am at wits end with this KVM. It is hard to get the information needed
to do this properly with centos 6 and KVM since it is so new and the
googling of 'KVM' brings up everything except kernel based virtual machines.
What I have done...
1) my cpus have virtualization
2) centos 6, selected 'vir
On 13 October 2011 07:04, Bob Hoffman wrote:
> I am at wits end with this KVM. It is hard to get the information needed
> to do this properly with centos 6 and KVM since it is so new and the
> googling of 'KVM' brings up everything except kernel based virtual machines.
>
http://docs.redhat.com/do
arek wrote
=
http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Virtualization/index.html
http://www.cyberciti.biz/faq/centos-rhel-linux-kvm-virtulization-tutorial/
thanks arek, but I have been through that a million times, backwards and
f
tomorrows a new day...will try to get into the config files for a quest
and see what I can do
sdl kept chokingI am sure it is just a configuration error.
however, most stuff is for rhel/centos 5.x and the newer packages are
much mature and changed from the examples.
there are numerous errors
55 matches
Mail list logo
