Re: [CentOS] black display during installation of CentOS5.5

On 10/20/10 10:38 PM, Ritika Garg wrote: > I had posted the following question 4-5 days ago. I want to add > something to the question which is important. The question was: > During installation of CentOS5.3 from DVD, the installation was > interrupted due to an error in a rpm package as the DVD

Re: [CentOS] black display during installation of CentOS5.5

On Thu, 2010-10-21 at 00:28 -0700, John R Pierce wrote: > On 10/20/10 10:38 PM, Ritika Garg wrote: > > I had posted the following question 4-5 days ago. I want to add > > something to the question which is important. The question was: > > During installation of CentOS5.3 from DVD, the installatio

Re: [CentOS] libmpeg2-utils

From: "m.r...@5-cent.us" > Trying to update a user's system, and yum gives up, because it wants to > update libmpeg2, and there's a dependency - the currently installed > version is required by libmpeg2-utils, and there seems to be no update to > that. Anyone have an idea why this is the case?

[CentOS] network interface up but no data

Hi List, I am running a x86_64 Centos server, after a reboot the network has decided to not work.. this particular machine has 8 eth ports eth0-7. eth0 and eth3 were bonded (mode 1 ) after reboot the bond did not work. It came up OK but no data was passing through it. all other interfaces on the m

[CentOS] temp dir, httpd and selinux

Hi, I have a php software installed on a centos server with selinux enforced activeted. The php software (glpi --> http://www.glpi-project.org) have a plugin that must write on a temp dir... but selinux dont give access to that dir to write. How should i do ? lewis _

[CentOS] POP3 server

Hi folks A POP3 client not configured to keep a copy of messages on the server, as soon as retieve a message send a DELE commando with the number of the just retrieved message. Then, at the end of the POP3 session, the clent sends a QUIT command, wich order POP3 server to close the conection an

Re: [CentOS] POP3 server

> So, I'm wondering if it's possible to tell Dovecot to actually delete the > message when receiving a DELE command instead of marking it for deletion > after the QUIT. Nope. RFC1939 specifically states that the DELE command only *marks* the email for deletion. Once the server enters the 'update'

[CentOS] Mount/automount fails with krb5-enabled nfs4

I have a problem that is driving me crazy. Our nfs server is running Solaris. Most clients mount directories from it with no problems, but not all. All clients that have problems run CentOS (5.4 and 5.5). I've found one or two of each version that fail, but also a couple of each version that work.

Re: [CentOS] Mount/automount fails with krb5-enabled nfs4

i work under proxy and i whant add php by using yum but i can't , and i can't accec to add/move application (i am root) ?? ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

Re: [CentOS] black display during installation of CentOS5.5

On 10/21/2010 1:38 AM, Ritika Garg wrote: I had posted the following question 4-5 days ago. I want to add something to the question which is important. The question was: During installation of CentOS5.3 from DVD, the installation was interrupted due to an error in a rpm package as the DVD had lo

[CentOS] Web based ping and port checker ?

Hello, does anybody know any simple software which allow checking host and its port availability using _web_ forms ? Something like: write ip address: write port number: [press button] Regards Przemek - Gielda samochodow nowych i uzywanych. http://l

[CentOS] send HTML formatted mail (for M$ Outlook) with mailx

Hi folks I have here a small ksh script which generates html output and I am trying to send this html output as inline HTML mail for M$ Outlook users (not attachment). But it doesn't work, in mail you see the html source as plain text [] echo 'http://schemas.microsoft.com/office/2004/12/omml

Re: [CentOS] Mount/automount fails with krb5-enabled nfs4

From: mehdi > i work under proxy and i whant add php by using yum but i can't , > and i can't accec to add/move application (i am root) ?? First, stop hijacking others threads... create a new one. Solution to your problem: http://tinyurl.com/ydeyaqo JD _

Re: [CentOS] more software raid questions

fred smith wrote: > On Tue, Oct 19, 2010 at 07:34:19PM -0700, Nataraj wrote: > >> >> I've seen this kind of thing happen when the autodetection stuff >> misbehaves. I'm not sure why it does this or how to prevent it. Anyway, >> to recover, I would use something like: >> >> mdadm --stop /dev/md

[CentOS] CentOS-announce Digest, Vol 68, Issue 10

Send CentOS-announce mailing list submissions to centos-annou...@centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-requ..

Re: [CentOS] send HTML formatted mail (for M$ Outlook) with mailx

From: Sven Aluoor > I have here a small ksh script which generates html output and I am > trying to send this html output as inline HTML mail for M$ Outlook > users (not attachment). > But it doesn't work, in mail you see the html source as plain text Not sure about outlook but the following

[CentOS] No "last command" in VIM?

Although I made sure that vim-enhanced.i386 is installed, pressing : then upArrow does not show me the last command that I've typed. Might I still be using vim-minimal erroneously? How to fix that? I don't see any mention of this in google or the past few months of fine archives. Thanks. [g...@me

Re: [CentOS] more software raid questions

On Thu, Oct 21, 2010 at 08:59:13AM -0700, Nataraj wrote: > fred smith wrote: > > On Tue, Oct 19, 2010 at 07:34:19PM -0700, Nataraj wrote: > > > >> > >> I've seen this kind of thing happen when the autodetection stuff > >> misbehaves. I'm not sure why it does this or how to prevent it. Anyway,

Re: [CentOS] No "last command" in VIM?

On Thu, Oct 21, 2010 at 06:19:54PM +0200, Dotan Cohen wrote: > Although I made sure that vim-enhanced.i386 is installed, pressing : > then upArrow does not show me the last command that I've typed. Might > I still be using vim-minimal erroneously? How to fix that? I don't see > any mention of this

Re: [CentOS] No "last command" in VIM?

Is there an alias hanging around that is redirecting you? John On Thu, Oct 21, 2010 at 12:36, Scott Robbins wrote: > On Thu, Oct 21, 2010 at 06:19:54PM +0200, Dotan Cohen wrote: > > Although I made sure that vim-enhanced.i386 is installed, pressing : > > then upArrow does not show me the last co

Re: [CentOS] No "last command" in VIM?

On 10/21/10 9:48 AM, John Kennedy wrote: Is there an alias hanging around that is redirecting you? John On Thu, Oct 21, 2010 at 12:36, Scott Robbins > wrote: On Thu, Oct 21, 2010 at 06:19:54PM +0200, Dotan Cohen wrote: > Although I made sure that vim-enhanced

[CentOS] missing dependency for package

Hello everyone, I know this isn't strictly CentOS query, but I am hoping that someone here with more experience than myself might have some thoughts. I am trying to get a plugin working for Ganglia on a CentOS 5.5 box, in a testing environment. The plugin is for apache monitoring, called Ganglia-

Re: [CentOS] Mount/automount fails with krb5-enabled nfs4

- Original Message - | I have a problem that is driving me crazy. Our nfs server is running | Solaris. Most clients mount directories from it with no problems, but | not all. All clients that have problems run CentOS (5.4 and 5.5). I've | found one or two of each version that fail, but also

Re: [CentOS] No "last command" in VIM?

On Thu, Oct 21, 2010 at 18:36, Scott Robbins wrote: > Is there possibly a /bin/vi which takes precedence over /usr/bin/vim? > (Or is the command "vim-enhanced"?) > That's it! Using the command vim instead of vi to open the file gives me history. Can anyone else confirm this? I actually confirmed

Re: [CentOS] No "last command" in VIM?

On Oct 21, 2010, at 13:42, Dotan Cohen wrote: > I'll file a bug if needed and someone confirms. It's not a bug: /bin/vi is supplied by the vim-minimal package and /usr/bin/vim is supplied by vim-ehnabced. Just alias vi to vim and you should be all set. Alfred _

Re: [CentOS] No "last command" in VIM?

On Oct 21, 2010, at 1:42 PM, Dotan Cohen wrote: > I'll file a bug if needed and someone confirms. Dotan, This is not a bug. When you invoke vim as 'vi', the -C option is added, which sets Vim to Vi-compatible mode; this disables a number of features, including :history. From :help history

Re: [CentOS] No "last command" in VIM?

On Oct 21, 2010, at 1:52 PM, Alfred von Campe wrote: > /bin/vi is supplied by the vim-minimal package d'oh! Alfred is correct, and i am mistaken (in cause, though not in effect). -steve -- If this were played upon a stage now, I could condemn it as an improbable fiction. - Fabian, Twelfth N

Re: [CentOS] more software raid questions

fred smith wrote: > > Thanks for the additional information. > > I'll try backing up everything this weekend then will take a stab at it. > > someone said earlier that the differing raid superblocks were probably > the cause of the misassignment in the first place. but I have no clue > how the supe

Re: [CentOS] more software raid questions

Nataraj wrote: > fred smith wrote: > >> Thanks for the additional information. >> >> I'll try backing up everything this weekend then will take a stab at it. >> >> someone said earlier that the differing raid superblocks were probably >> the cause of the misassignment in the first place. but I h

Re: [CentOS] more software raid questions

Nataraj wrote: > Nataraj wrote: > >> fred smith wrote: >> >> >>> Thanks for the additional information. >>> >>> I'll try backing up everything this weekend then will take a stab at it. >>> >>> someone said earlier that the differing raid superblocks were probably >>> the cause of the mis

Re: [CentOS] POP3 server

I was hoping Dovecot could be not so RFC compliant in this matter. Anyway if gets the DELE command the message arrived safely to the client. Any other POP3 server not so RFC compliant? Thanks for the answer. David - Original Message - From: "Drew" To: "CentOS mailing list" Sent: Thu

Re: [CentOS] No "last command" in VIM?

On Thu, Oct 21, 2010 at 07:42:25PM +0200, Dotan Cohen wrote: > On Thu, Oct 21, 2010 at 18:36, Scott Robbins wrote: > > Is there possibly a /bin/vi which takes precedence over /usr/bin/vim? > > (Or is the command "vim-enhanced"?) > > > > > That's it! Using the command vim instead of vi to open th

[CentOS] how to do repetetive command in shell

Dear all, i'm writing a certain script which does a specific task in a repetitive manner, i'm going to give a similar script with the same concept hope you could advise me to a better way: USER1="roland" USER2="dany" USER3="kevin" cp -r /opt/$USER1/test /backup/$USER1 cp -r /opt/$USER2/test

Re: [CentOS] missing dependency for package

Hello, using cpan2rpm http://www.tlviewer.org/centos/5/i386/repodata/repoview/perl-mime-construct-0-1.11-1.el5.html --- On Thu, 10/21/10, Ski Dawg wrote: > From: Ski Dawg > Subject: [CentOS] missing dependency for package > To: centos@centos.org > Date: Thursday, October 21, 2010, 10:21 AM >

Re: [CentOS] how to do repetetive command in shell

> USER1="roland" > USER2="dany" > USER3="kevin" > > > cp -r /opt/$USER1/test /backup/$USER1 > cp -r /opt/$USER2/test /backup/$USER2 $ for user in one two three four; do echo $user; done one two three four t ___ CentOS mailing list CentOS@centos.org h

Re: [CentOS] how to do repetetive command in shell

On 10/21/10 11:45 AM, Roland RoLaNd wrote: Dear all, i'm writing a certain script which does a specific task in a repetitive manner, i'm going to give a similar script with the same concept hope you could advise me to a better way: Try "for" http://www.cyberciti.biz/faq/bash-for-loop/ _

[CentOS] XEN and RAID

Hello, I am looking for good website with information on the above 2 items listed in the subject. I have place some with RAID and believe I am picking that up but XEN is another story. I have some free time coming and would really like to learn both and build my present machine into a VM with

Re: [CentOS] how to do repetetive command in shell

for i in `ls -d /opt` do cp /opt/${i}/test/ /backup/${i} done On Thu, Oct 21, 2010 at 14:45, Roland RoLaNd wrote: > Dear all, > > i'm writing a certain script which does a specific task in a repetitive > manner, i'm going to give a similar script with the same concept hope you > could advise me

Re: [CentOS] how to do repetetive command in shell

Not quite right... for i in `ls -d /opt | cut -d/ -f2` do cp /opt/${i}/test/ /backup/${i} done Takes out the /opt/ from my first try... John On Thu, Oct 21, 2010 at 14:51, John Kennedy wrote: > for i in `ls -d /opt` > do > cp /opt/${i}/test/ /backup/${i} > done > > > On Thu, Oct 21, 2010 at 14

Re: [CentOS] XEN and RAID

On Thu, Oct 21, 2010 at 8:51 PM, Robert Spangler wrote: > Hello, > > I am looking for good website with information on the above 2 items listed in > the subject.  I have place some with RAID and believe I am picking that up > but XEN is another story.  I have some free time coming and would really

Re: [CentOS] how to do repetetive command in shell

Damn...I will get this right...Need more sleep... for i in `ls -d /opt/* | cut -d/ -f3` do cp /opt/${i}/test/ /backup/${i} done I KNOW this one will work...If not, I quit!!! John On Thu, Oct 21, 2010 at 14:55, John Kennedy wrote: > Not quite right... > > for i in `ls -d /opt | cut -d/ -f2` >

Re: [CentOS] how to do repetetive command in shell

On Oct 21, 2010, at 2:50 PM, Pintér Tibor wrote: > >> USER1="roland" >> USER2="dany" >> USER3="kevin" >> >> >> cp -r /opt/$USER1/test /backup/$USER1 >> cp -r /opt/$USER2/test /backup/$USER2 > > $ for user in one two three four; do echo $user; done > one > two > three > four > or if the list of u

Re: [CentOS] Xen3.3 rpm for 32Bit?

On Tue, Oct 19, 2010 at 06:06:58PM +0200, Dirk wrote: > Am 15.10.10 22:59, schrieb Pasi Kärkkäinen: >> On Sat, Oct 09, 2010 at 02:15:30PM +0200, Dirk H. Schulz wrote: >>>Hi folks, >>> >>> I would like to test Xen3.3 on CentOS 5.5 on an older machine which is >>> not 64bit capable. >>> >>> Sinc

Re: [CentOS] how to do repetetive command in shell

Roland RoLaNd wrote: > > i'm writing a certain script which does a specific task in a repetitive > manner, i'm going to give a similar script with the same concept hope you > could advise me to a better way: > > USER1="roland" > USER2="dany" > USER3="kevin" > > cp -r /opt/$USER1/test /backup/$USER1

[CentOS] missing dependency for package

On Thu, 21 Oct 2010, Ski Dawg wrote: > from that repository, it is missing the dependency, > perl-mime-construct, which I am not able to find packaged anywhere. I see it in F 13 and RawHide, but it in turn needs: perl(Proc::WaitStat) [which was in RHL 6.2 ;) and is back in F13 ]; which in turn

Re: [CentOS] how to do repetetive command in shell

On 21 October 2010 19:45, Roland RoLaNd wrote: > i'm writing a certain script which does a specific task in a repetitive > manner, i'm going to give a similar script with the same concept hope you > could advise me to a better way: Good old Advanced Bash Scripting Guide comes to help! http://tldp

Re: [CentOS] No "last command" in VIM?

On Thu, Oct 21, 2010 at 19:52, Alfred von Campe wrote: > It's not a bug: /bin/vi is supplied by the vim-minimal package and > /usr/bin/vim is supplied by vim-ehnabced.  Just alias vi to vim and you > should be all set. > Rather than alias it, I'll just get used to typing vim on CentOS installs.

Re: [CentOS] how to do repetetive command in shell

On Thu, 21 Oct 2010, John Kennedy wrote: > Damn...I will get this right...Need more sleep... > for i in `ls -d /opt/* | cut -d/ -f3` do > cp /opt/${i}/test/ /backup/${i} > done Using ls in a for loop is rarely necessary. for i in /opt/*; do cp -a ${i}/test /backup/$(basename $i) done

Re: [CentOS] network interface up but no data

On Thu, Oct 21, 2010 at 9:52 PM, Nat N wrote: > Hi List, > > I am running a x86_64 Centos server, after a reboot the network has decided to > not work.. this particular machine has 8 eth ports eth0-7. eth0 and eth3 were > bonded (mode 1 ) after reboot the bond did not work. It came up OK but no >

Re: [CentOS] Mount/automount fails with krb5-enabled nfs4

For what its worth, every time that I've tried kerberized NFS with RHEL, I've run into issues unless I was running the latest version of mount-utils, which I _think_ included rpc.gssd and rpc.svcgssd. My memory may be failing, and I'll look later, but my recollection is that it was very sensitive

Re: [CentOS] Mount/automount fails with krb5-enabled nfs4

- Original Message - | For what its worth, every time that I've tried kerberized NFS with | RHEL, | I've run into issues unless I was running the latest version of | mount-utils, which I _think_ included rpc.gssd and rpc.svcgssd. | | My memory may be failing, and I'll look later, but my re

Re: [CentOS] black display during installation of CentOS5.5

I havent't tried nofb. If I write "linux nofb" at boot:, then will the innstallation take place in text mode or graphical mode? ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

[CentOS] OT: looking for network performance comparison chart

Hi all, Does anyone have, or know of a comparison chart of the different network adapters, i.e. 1GB / 10GB, Infiniband, etc. And if possible with a few top brand NIC's and switches listed as well. I would like to see, for example, what the max throughput is of a 1GB NIC (and this could probably