Robert Heller wrote:
>
> Just about all of the low-end Dell boxes (laptops or desktops) tend to
> be low-quality boxes -- you gets what you pay for. Higher end Dells
> seem to be OK (eg 'Workstations', servers, etc.).
In October I found a discard Dell Optiplex GX50 - older low-end dell.
Found
Dear All
I need to ftp all of the files & folders of CentOS 5 server through WS_FTP .
But it just lets for /home/www user login , but not root user . As I want to
see and have all of files , can you please let me know how can I raise the
ftp priority such that WS_FTP can login as root user .
Thank
hadi motamedi wrote:
> Dear All
> I need to ftp all of the files & folders of CentOS 5 server through
> WS_FTP . But it just lets for /home/www user login , but not root user
> . As I want to see and have all of files , can you please let me know
> how can I raise the ftp priority such that WS_
Les Mikesell wrote:
> On 1/8/2010 3:06 PM, Christoph Maser wrote:
>> Am Freitag, den 08.01.2010, 16:35 +0100 schrieb Eero Volotinen:
>>> Well, centos is not optimal system for laptop due to old drivers and
>>> so on.
>>>
>>> Personally I prefer ubuntu, fedora or opensuse on laptops.. or OSX.
>>>
>>
Michael A. Peters wrote:
>
> Back to laptop question - I have always preferred the Thinkpad T20
> series
should read "T Series" - T20 is quite deprecated now ;)
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
I need to build a bank of 12 centos boxes, for an experiment I'm doing.
I don't want to install centos 12 times, I'm using virtual box across
three machines, how can I get the first run scripts to run again to that
the box is reconfigured on it's next boot.
I want each box to appear like a fres
Am Sonntag, den 10.01.2010, 12:26 +0100 schrieb Mr Gabriel:
> I need to build a bank of 12 centos boxes, for an experiment I'm doing.
> I don't want to install centos 12 times, I'm using virtual box across
> three machines, how can I get the first run scripts to run again to that
> the box is recon
Mr Gabriel wrote:
>
> I want each box to appear like a fresh unique install.
man sys-unconfig
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Jacob Hydeman wrote on Sat, 9 Jan 2010 18:15:14 -0800:
> BOOTPROTO=dhcp
I'm using the same setup for multiple bridges for Xen, no problem. But I
use static IP addresses. You *have* to use IP numbers from different
subnets.
> I've read somewhere that STP needs to be enabled when using multiple
Frankly, you should not administer a server at all with this knowledge
level. Pragmatically spoken, you want to use WinSCP.
Kai
--
Get your web at Conactive Internet Services: http://www.conactive.com
___
CentOS mailing list
CentOS@centos.org
http:
Hello I will briefly draw the situation
Router with one interface eth0 , to local network 10.123.0.0/16
on a local network ADSL modem with IP 10.123.10.11
I want to use 10.123.10.11 as a connection to internet .
Because of that I have created default route "ip route add default via
10.123.10.1
*** Sorry for mistake
I have configured static route on ADSL modem "10.123.0.0/16 via
> 10.123.10.1" which ensures traffic comming from internet will ge to
> my router
10.123.10.1 is address of eth0 on my router.
On Sun, Jan 10, 2010 at 3:33 PM, David Hláčik wrote:
> Hello I will briefly draw t
On Sun, Jan 10, 2010 at 4:04 AM, hadi motamedi wrote:
> Dear All
> I need to ftp all of the files & folders of CentOS 5 server through WS_FTP .
> But it just lets for /home/www user login , but not root user . As I want to
> see and have all of files , can you please let me know how can I raise t
I know of the issue using vmware server 2.0.2 and centos 5.4, but is their
any reason not to use the .rpm install of for centos? I have always used
the .tar file but this time used the rpm and it appeared to install and not
crash. I went ahead and did the glib correction but I was wondering if
u
Am 10.01.2010 15:33, schrieb David Hláčik:
> Hello I will briefly draw the situation
[ ... ]
> Please help,
>
> Thank you in advance.
>
> David
The router runs CentOS or Fedora? Because you are sending your mails to
both mailing lists.
Alexander
_
Hello,
CentOS 5.4, but I believe there will be no difference.
Best,
David
On Sun, Jan 10, 2010 at 4:07 PM, Alexander Dalloz wrote:
> Am 10.01.2010 15:33, schrieb David Hláčik:
>
>> Hello I will briefly draw the situation
>
> [ ... ]
>
>> Please help,
>>
>> Thank you in advance.
>>
>> David
>
Hello guys,
I have two ISP's connected to my router. One via eth2, second one via
ADSL modem, with ppoe doing on my Centos 5 .
The problem I have is, that when ADSL fails , interface ppp0 is
removed. This also removes my static routes configured for this
interface. I do not want that, as I have l
On Sat, 2010-01-09 at 07:14 -0800, nate wrote:
> JohnS wrote:
>
> > Interesting link for info there. I found [1] and at the bottom of the
> > page there is like tidbits of info in PDFs of the different models. Any
> > idea where I could get more info than that, like data sheets and case
> > st
Hello guys,
On my Centos5 interfaces start in this order :
eth0,eth1,eth2,ppp0
I believe it goes by alpabethical order.
Is there a possibility to change this order? I want to start
interfaces which connects to internet first , i.e. in order
eth0,ppp0,eth1,eth2.
Can I just rename ifcfg-* scripts
On Sun, 2010-01-10 at 16:54 +0100, David Hláčik wrote:
> Hello guys,
>
> I have two ISP's connected to my router. One via eth2, second one via
> ADSL modem, with ppoe doing on my Centos 5 .
>
> The problem I have is, that when ADSL fails , interface ppp0 is
> removed. This also removes my static
On Sun, 2010-01-10 at 17:43 +0100, David Hláčik wrote:
> Hello guys,
>
> On my Centos5 interfaces start in this order :
>
> eth0,eth1,eth2,ppp0
>
> I believe it goes by alpabethical order.
> Is there a possibility to change this order? I want to start
> interfaces which connects to internet fir
> but they still only have one mouse button, making them a PITA for
> anything other than OS X.
On Fedora 12 you have the middle and right button with the trackpad
(with resp two and three fingers, along with two fingers scrolling
etc.). It works very well.
Even before I regularly used Linux on Ma
In my case I installed & configured one box. Make a image with
Clonezilla & deploy to another boxes.
On Sun, Jan 10, 2010 at 12:26, Mr Gabriel wrote:
> I need to build a bank of 12 centos boxes, for an experiment I'm doing.
> I don't want to install centos 12 times, I'm using virtual box across
On Sun, Jan 10, 2010 at 01:31:37PM +0100, Kai Schaetzl wrote:
> Frankly, you should not administer a server at all with this knowledge
> level. Pragmatically spoken, you want to use WinSCP.
Administer? You are giving him far too much credit. For
the past few months all he has ev
On 10/01/2010 12:10, Daniel Bird wrote:
> Mr Gabriel wrote:
>
>> I want each box to appear like a fresh unique install.
>>
> man sys-unconfig
>
>
>
> ___
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman/listinfo/centos
On Sat, Jan 9, 2010 at 11:15 PM, Jacob Hydeman wrote:
> Running CentOS 5.4 x64.
>
> Have successfully bridged eth2 with br2 by following the instructions here:
> http://wiki.libvirt.org/page/Networking (under the RHEL section)
>
> Have been running several KVM VMs successfully via this bridge.
>
>
On Sun, Jan 10, 2010 at 6:33 AM, David Hláčik wrote:
> Hello I will briefly draw the situation
>
> Router with one interface eth0 , to local network 10.123.0.0/16
>
> on a local network ADSL modem with IP 10.123.10.11
>
> I want to use 10.123.10.11 as a connection to internet .
>
> Because of tha
In /etc/sysconfig/firstboot change
RUN_FIRSTBOOT=NO
to
RUN_FIRSTBOOT=YES
Clive
--
Clive
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On Sun, Jan 10, 2010 at 2:55 PM, Jim Perrin wrote:
> On Sun, Jan 10, 2010 at 4:04 AM, hadi motamedi
> wrote:
> > Dear All
> > I need to ftp all of the files & folders of CentOS 5 server through
> WS_FTP .
> > But it just lets for /home/www user login , but not root user . As I want
> to
> > see
hadi motamedi wrote:
> Thank you very much for your reply . I actually wanted to copy my
> CentOS server into an client in the LAB for further test &
> investigation . Can I have a copy of it up and running by ftp all of
> the files & folders on "/" ?
>
no.
permissions, links, special file
On Mon, Jan 11, 2010 at 6:02 AM, John R Pierce wrote:
> hadi motamedi wrote:
> > Thank you very much for your reply . I actually wanted to copy my
> > CentOS server into an client in the LAB for further test &
> > investigation . Can I have a copy of it up and running by ftp all of
> > the files
hadi motamedi wrote:
> Thank you for your reply . So the only way is cloning his hard disk .
> Am I right?
I'd consider using dump to dump each ext3fs file system, then use
'restore' to restore each of these dumps to appropriately sized file
systems for the new target system. the source syste
John R Pierce wrote:
> # dump -0uv /dev/sda2 | ssh r...@target -c "restore -rf - /mnt/var"
>
eeek. slight modification here...
# dump -0uvf - /dev/sda2 | ssh r...@target -c "restore -rf - /mnt/var"
the -f - tells dump to write the dumpfile to stdout, much as the f - in
the 'rest
33 matches
Mail list logo
