Re: [CentOS] whither mplayerplug-in?

On Mon, 09 Mar 2009 00:57:26 -0600 Frank Cox wrote: > I have rpmfusion set up, but yum tells me that mplayerplug-in is not > available. > > Has it been replaced by something else? Typical... I spent a couple of hours off-and-on looking for this, and five minutes after I post this question I foun

Re: [CentOS] whither mplayerplug-in?

On Mon, 09 Mar 2009 01:23:35 -0600 Frank Cox wrote: > > I have rpmfusion set up, but yum tells me that mplayerplug-in is not > > available. > > > > Has it been replaced by something else? > > Typical... I spent a couple of hours off-and-on looking for this, and five > minutes after I post this q

Re: [CentOS] Memory vs. Display Card

>-Original Message- >From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf >Of MHR >Sent: Monday, March 09, 2009 6:20 AM >To: CentOS mailing list >Subject: Re: [CentOS] Memory vs. Display Card > >3) Some motherboards (many) will not accept different size DIMMs at >the

Re: [CentOS] Memory vs. Display Card

In article , MHR wrote: >2) Your answer above was not clear: did the 4GB work by itself without >the other 2GB? If so, the above is your problem. If not, you're in >deeper guano that you think, BUT: The 4GB had the same problem with and without the 2GB. >Also, by "running in 64-bit mode" (pr

Re: [CentOS] Memory vs. Display Card

In article <12768.4492654682$1236586...@news.gmane.org>, Sorin Srbu wrote: >If the motherboard supports dual-channel configs, one might want to take care >how one distributes the different mem-sticks in the banks. Eg the 2GB-sticks >in bank 1 and 3 and the 4GB-sticks in banks 2 and 4. Well, ye

Re: [CentOS] hplip problems - configure: error: "cannot find libjpeg support"

From: Anne Wilson > Thanks, John and Robert. I installed both, and sure enough 3.9.2 ran and > apparently completed, but when I tried to run hp-setup it said that > python-dbus is not installed. My attempts with yum have not succeeded in > tracking this down, so do you know how/where I get

Re: [CentOS] whither mplayerplug-in?

Frank Cox wrote: > I have rpmfusion set up, but yum tells me that mplayerplug-in is not > available. > > Has it been replaced by something else? Try the rpmforge repository - that looks more complete to me for EL distributions at the moment. Ralph pgpCF6c43r6ZR.pgp Description: PGP signature _

Re: [CentOS] Memory vs. Display Card

On 09.03.2009 11:09, Rick wrote: > Well, yeah, of course. But even if I got that wrong, the 4GB alone did not > work in the same slots the 2GB sticks were in. So, either the memory sticks are bad (one or two of them), or the memory have bad timing in some way making them not compatible with the m

Re: [CentOS] hplip problems - configure: error: "cannot find libjpeg support"

Anne Wilson wrote: > On Friday 06 March 2009 16:39, John Doe wrote: > >> From: Anne Wilson >> >> >>> I'm trying to get hplip-2.7.12 installed, and I'm reasonably sure that I >>> had it installed on this box before my problems last month. Anyway, it >>> will not build at the moment. It

Re: [CentOS] Memory vs. Display Card

>-Original Message- >From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf >Of Rick >Sent: Monday, March 09, 2009 11:10 AM >To: centos@centos.org >Subject: Re: [CentOS] Memory vs. Display Card > >>If the motherboard supports dual-channel configs, one might want to tak

Re: [CentOS] Memory vs. Display Card

>-Original Message- >From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf >Of Morten Torstensen >Sent: Monday, March 09, 2009 12:14 PM >To: CentOS mailing list >Subject: Re: [CentOS] Memory vs. Display Card > >> Well, yeah, of course. But even if I got that wrong, th

[CentOS] LDAP proxy

List, I have a challenge with some LDAP servers: I am in the process of converting from physical LDBM backends to virtualized BDB backends. Problem is that there are a lot of clients connecting to this ldap instance (with updates), so i do not want to inform them that our ldap server is offlin

[CentOS] Clonezilla SE with CentOS5

Hi all, I'm looking for a cloning solution for our Windows/Linux/*nix computer park and ran into Clonezilla. Apparantely the DRBL and other documentation mentions CentOS as a suitable base for it. Does anybody on this list use this solution and can say something about it in the running-Clonezilla

Re: [CentOS] Nfs4 with kerberos freezing system

Olaf Mueller wrote: > Is anybody here successfully using nfs4/krb5p with CentOS 5.2? After a few more testing the setting nfs4/krb5 seems to be stable. So the error sits in krb5p. Any hints? Thank you Olaf ___ CentOS mailing list CentOS@centos.org http

Re: [CentOS] hplip problems - configure: error: "cannot find libjpeg support"

On Sunday 08 March 2009 20:58, you wrote: > yes, the "yum list" output shows both installed and available (from > the repos you have configured). if not installed it shows the repo - > e.g., "base", "rpmforge". so, if you're is showing installed there's > something else going on. is it complaining

Re: [CentOS] Memory vs. Display Card

On Mon, 2009-03-09 at 12:14 +0100, Morten Torstensen wrote: > On 09.03.2009 11:09, Rick wrote: > > Well, yeah, of course. But even if I got that wrong, the 4GB alone did not > > work in the same slots the 2GB sticks were in. > > So, either the memory sticks are bad (one or two of them), or the me

Re: [CentOS] hplip problems - configure: error: "cannot find libjpeg support"

On Monday 09 March 2009 11:53:35 Roger Wells wrote: > Anne Wilson wrote: > > On Friday 06 March 2009 16:39, John Doe wrote: > >> From: Anne Wilson > >> > >>> I'm trying to get hplip-2.7.12 installed, and I'm reasonably sure that > >>> I had it installed on this box before my problems last month.

Re: [CentOS] Nfs4 with kerberos freezing system

On Mar 9, 2009, at 2:32 AM, Olaf Mueller wrote: > Hello, > > I have a CentOS 5.2 server that exports /home on the local network > for 2 > users by secure nfs4 with kerberos krb5p. The clients are a notebook > and a desktop pc. > The following error is always reproducible on all clients. If run

Re: [CentOS] hplip problems - configure: error: "cannot find libjpeg support"

> > there's > > also: > > rpm -qa dbus-python\* > > to check that something is installed. > That simply returns > dbus-python-0.70-7.el5 In case you did not try it already, have you tried hp-check? Did you check http://hplipopensource.com/hplip-web/install/manual/distros/centos.html for depe

Re: [CentOS] Clonezilla SE with CentOS5

Sorin Srbu wrote: > Hi all, > > I'm looking for a cloning solution for our Windows/Linux/*nix computer park > and ran into Clonezilla. Apparantely the DRBL and other documentation > mentions CentOS as a suitable base for it. > > Does anybody on this list use this solution and can say something abou

Re: [CentOS] Clonezilla SE with CentOS5

Sorin Srbu wrote: > Hi all, > > I'm looking for a cloning solution for our Windows/Linux/*nix computer park > and ran into Clonezilla. Apparantely the DRBL and other documentation > mentions CentOS as a suitable base for it. > > Does anybody on this list use this solution and can say something ab

Re: [CentOS] Clonezilla SE with CentOS5

>-Original Message- >From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf >Of Les Mikesell >Sent: Monday, March 09, 2009 2:50 PM >To: CentOS mailing list >Subject: Re: [CentOS] Clonezilla SE with CentOS5 > >> Does anybody on this list use this solution and can say so

[CentOS] [bug] Perl Performance Issue

Hello, I'm currently bitten hard by a bug which was introduced by RedHat in their perl releases. This bug has been fixed "recently", to be true in January, by RedHat. The bug I'm talking about is a performance issue, which is caused by overloading blessed functions: http://bugs.centos.org/view.ph

Re: [CentOS] [bug] Perl Performance Issue

Georg Grabler wrote: > The bug I'm talking about is a performance issue, which is caused by > overloading blessed functions: > http://bugs.centos.org/view.php?id=2357 > > > The bug fix (January 2009): > http://rhn.redhat.com/errata/RHBA-2009-0117.html > > claims to fix > 379791

Re: [CentOS] hplip problems - configure: error: "cannot find libjpeg support"

On Monday 09 March 2009 13:40, John Doe wrote: > > > there's > > > also: > > > rpm -qa dbus-python\* > > > to check that something is installed. > > > > That simply returns > > dbus-python-0.70-7.el5 > > In case you did not try it already, have you tried hp-check? To me it implies that I have ea

[CentOS] LSI Logic MegaRAID 8480 Storage controller

I have LSI Logic MegaRAID 8480 Storage controller I am having trouble reconfigure one of the hardware raid devices It is configured with 4 hardware raid logical volumes on /dev/sda /dev/sdb /dev/sdc /dev/sdd. I am in the middle of rebuilding the system,  and at this point I am only using one of

[CentOS] Grub Loading stage2Read Error

Hi there, I had a system drop this weekend, and upon boot, the system halts at a black screen with the following error: "Grub Loading stage2Read Error" Now upon googling around, it seems to be recommended to reinstall GRUB. My system is a simple raid 0 (data backed up), with the typical pa

Re: [CentOS] Memory vs. Display Card

Rick wrote: > In article , > MHR wrote: > > >> 2) Your answer above was not clear: did the 4GB work by itself without >> the other 2GB? If so, the above is your problem. If not, you're in >> deeper guano that you think, BUT: >> > > The 4GB had the same problem with and without the 2GB.

Re: [CentOS] Memory vs. Display Card

William L. Maltby wrote: > So, if you've got the leeway, try manually bumping the voltage for the > unit a couple of tenths. Risk is low, but it is there. > The OP said earlier he has an Intel D975XBX motherboard. Intel boards are very conservatively engineered, and don't have tweaks for ov

Re: [CentOS] LSI Logic MegaRAID 8480 Storage controller

From: drew einhorn > When I try to delete it, it refuses and says: >This is an OS drive. The virtual drive cannot be deleted. > Any ideas on how to get past this problem with the MegaRAID Storage Manager, > or pointers the better documentation, and maybe even a tutorial for the > MegaCLI >

Re: [CentOS] Grub Loading stage2Read Error

On 9-Mar-09, at 9:32 AM, dnk wrote: > Hi there, > > I had a system drop this weekend, and upon boot, the system halts at a > black screen with the following error: > > "Grub Loading stage2Read Error" > > Now upon googling around, it seems to be recommended to reinstall > GRUB. My system is a simp

Re: [CentOS] Memory vs. Display Card

On Mon, Mar 09, 2009, John R Pierce wrote: ... >ok, then you have the wrong 4GB (2x2GB?) sticks. You might review the >memory specs for your motherboard, not all DDR2 is the same. >http://www.intel.com/support/motherboards/desktop/d975xbx/sb/CS-026567.htm I usually go to the Kingston site to fi

Re: [CentOS] LSI Logic MegaRAID 8480 Storage controller

>There is a MegaCLI command line interface that runs under the operating >system.  Normally I prefer command line tools.  But this software is big, >and complex.  All I have been able to find is a reference manual, >that has lots of typos and is not very well organized for me to learn >what I need

Re: [CentOS] Clonezilla SE with CentOS5

Sorin Srbu wrote: >> -Original Message- >> From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On >> > Behalf > >> Of Les Mikesell >> Sent: Monday, March 09, 2009 2:50 PM >> To: CentOS mailing list >> Subject: Re: [CentOS] Clonezilla SE with CentOS5 >> >> >>> Doe

Re: [CentOS] Memory vs. Display Card

Rick wrote: > In article <12768.4492654682$1236586...@news.gmane.org>, > Sorin Srbu wrote: > >> If the motherboard supports dual-channel configs, one might want to take >> care >> how one distributes the different mem-sticks in the banks. Eg the 2GB-sticks >> in bank 1 and 3 and the 4GB-sticks

Re: [CentOS] Clonezilla SE with CentOS5

Michael Peterson wrote: > > Please let us know how it works for you. > I did not know that you could install it on CentOS. > I just started looking at it lately and can not get the live CD to work > on new or old hardware. > I have used PartImage and hoped it would be easier to use but no luck >

Re: [CentOS] Clonezilla SE with CentOS5

Sorin Srbu wrote: > Hi all, > > I'm looking for a cloning solution for our Windows/Linux/*nix computer park > and ran into Clonezilla. Apparantely the DRBL and other documentation > mentions CentOS as a suitable base for it. > > Does anybody on this list use this solution and can say something ab

Re: [CentOS] Memory vs. Display Card

Bill Campbell writes: > I usually go to the Kingston site to find the proper memory for > specific main boards, and get most of our RAM from newegg.com. > > http://www.kingston.com > > http://www.newegg.com I second this, except that I find Kingston often has the best price for ram,

Re: [CentOS] Memory vs. Display Card

On Sun, 2009-03-08 at 19:27 -0700, John R Pierce wrote: > Rick wrote: > > In article <20090308031754.ga11...@bludgeon.org>, > > Ray Van Dolson wrote: > > > > > >> That sounds pretty strange. Have you confirmed that removing the "new" > >> memory allows you to run in runlevel 5 again? > >>

Re: [CentOS] LSI Logic MegaRAID 8480 Storage controller

On Mon, Mar 9, 2009 at 10:38 AM, John Doe wrote: > > From: drew einhorn >> When I try to delete it, it refuses and says: >>    This is an OS drive.  The virtual drive cannot be deleted. >> Any ideas on how to get past this problem with the MegaRAID Storage Manager, >> or pointers the better docum

[CentOS] port based routing

Good Evening, I am trying to set up port based routing on a CentOS 5.2 box as described here: http://www.linuxhorizon.ro/iproute2.html (second example) Therefor I have set up the following mangle and routing rules: $IPTABLES -A OUTPUT -t mangle -p tcp --dport 1100 -j MARK --set-mark 1 $IPTABLES

[CentOS] usb mouse config

Hello. I have 5.2 running nicely on my Aspire laptop. It has a 'mousepad' (which I don't like), so I put a usb mouse on it. It works properly, but I (apparently) can't change the motion (in Preferences > Mouse, Motion tab). Any setting for the Acceleration and Sensitivity don't affect the motio

Re: [CentOS] Memory vs. Display Card

On Mon, Mar 9, 2009 at 1:18 PM, Louis Lagendijk wrote: > On Sun, 2009-03-08 at 19:27 -0700, John R Pierce wrote: > > Rick wrote: > > > In article <20090308031754.ga11...@bludgeon.org>, > > > Ray Van Dolson wrote: > > > > > > > > >> That sounds pretty strange. Have you confirmed that removing th

[CentOS] need help with keyring

I should mention that I'm a total newbie with keyrings! I tried searching for help sites - found 1, but I still have a problem. If there is a website (or sites) that explain this, please post it (them)! Ok, so I have a laptop with wifi, running CentOS 5.2. When I boot it, it finds the nearby wi

Re: [CentOS] Memory vs. Display Card

On Mon, Mar 9, 2009 at 3:39 PM, Victor Padro wrote: > > > On Mon, Mar 9, 2009 at 1:18 PM, Louis Lagendijk > wrote: >> >> On Sun, 2009-03-08 at 19:27 -0700, John R Pierce wrote: >> > Rick wrote: >> > > In article <20090308031754.ga11...@bludgeon.org>, >> > > Ray Van Dolson   wrote: >> > > >> > > >

[CentOS] Identical yum configs, different results

Hi all, I have two new Centos 5.2 servers ("drizzle" and "fog"), both ROCKS headnodes installed from the same rolls. Identical `uname -a' output (2.6.18-92.1.13.el5, x86_64 etc), identical yum versions (Version: 3.2.8 Release: 9.el5.centos.1) with identical yum.conf files and identical repo

Re: [CentOS] Identical yum configs, different results

Rob Hutten wrote: > Installed Packages > Name : octave its already installed... > Error: No matching Packages to list which is correct, since there is no Octave in CentOS-5 -- Karanbir Singh : http://www.karan.org/ : 2522...@icq ___ Ce

Re: [CentOS] Identical yum configs, different results

--- On Mon, 3/9/09, Rob Hutten wrote: > From: Rob Hutten > Subject: [CentOS] Identical yum configs, different results > To: centos@centos.org > Date: Monday, March 9, 2009, 4:21 PM > Hi all, > > I have two new Centos 5.2 servers ("drizzle" and > "fog"), both ROCKS headnodes installed from

Re: [CentOS] Identical yum configs, different results

--- On Mon, 3/9/09, Rob Hutten wrote: > From: Rob Hutten > Subject: [CentOS] Identical yum configs, different results > To: centos@centos.org > Date: Monday, March 9, 2009, 4:21 PM > Hi all, > > I have two new Centos 5.2 servers ("drizzle" and > "fog"), both ROCKS headnodes installed from

[CentOS] freetype-freeworld?

Is there a Centos equivalent to the Fedora freetype-freeworld? -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

Re: [CentOS] need help with keyring

On Mon, Mar 9, 2009 at 2:55 PM, Michael Klinosky wrote: > > Ok, so I have a laptop with wifi, running CentOS 5.2. When I boot it, it > finds the nearby wifi signals, and tries to connect to mine. To do this, > it puts up a window to get my default keyring password. Perhaps I needed > to config som