On Thursday 21 February 2008 12:04:48 Johnny Hughes wrote:
> Anne Wilson wrote:
> > On Thursday 21 February 2008 09:56, Anne Wilson wrote:
> >> On Tuesday 19 February 2008 13:02, Johnny Hughes wrote:
>
>
>
> >> Maybe you are right about the driver not handling the dvi port
> >> correctly. I really
Anne Wilson wrote:
On Thursday 21 February 2008 09:56, Anne Wilson wrote:
On Tuesday 19 February 2008 13:02, Johnny Hughes wrote:
Maybe you are right about the driver not handling the dvi port correctly.
I really didn't want to go down the route of the proprietary drivers, so
maybe I will
On Thursday 21 February 2008 09:56, Anne Wilson wrote:
> On Tuesday 19 February 2008 13:02, Johnny Hughes wrote:
> > You say that you bought a digital lead ... meaning I guess that you are
> > using a different PORT on your video card and monitor. It is possible
> > that he standard "nv" driver do
On Tuesday 19 February 2008 13:02, Johnny Hughes wrote:
>
> You say that you bought a digital lead ... meaning I guess that you are
> using a different PORT on your video card and monitor. It is possible
> that he standard "nv" driver does not support that port on your video
> card and that you wi
Anne Wilson wrote:
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
ModelName"Monitor 1280x1024"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync60.0 - 72.0
VertRefresh 60.0 - 72.0
Option
On Monday 18 February 2008 18:49, Terry Polzin wrote:
> Have you tried running system-config-display --reconfig?
>
> The reconfig argument starts with a fresh config file and seems to detect
> the hardware better.
That writes an xorg.conf with no monitor lines at all, then gives you the
option of
On Monday 18 February 2008 18:44, Bob Beers wrote:
> > ### Comment all HorizSync and VertSync values to use DDC:
> > Identifier "Monitor0"
> > ModelName "Monitor 1280x1024"
> > ### Comment all HorizSync and VertSync values to use DDC:
>
> try what it says above or
I didn'
On Monday 18 February 2008 12:24, Anne Wilson wrote:
> I originally set up this monitor with an analogue lead. Everything seemed
> fine, so I didn't check xorg.conf at all. Then I bought a digital lead,
> and since then the monitor blinks. Running system-config-display
> identifies it as a 1280
On Feb 18, 2008 12:24 PM, Anne Wilson <[EMAIL PROTECTED]> wrote:
> Any advice, please?
I am not an expert, but maybe ...
> ### Comment all HorizSync and VertSync values to use DDC:
>Identifier "Monitor0"
>ModelName"Monitor 1280x1024"
> ### Comment all HorizSync and VertS
9 matches
Mail list logo
