On 12/07/11 12:55 AM, John Hodrien wrote:
> In my limited experience, if you can disable ECC in your BIOS, memtest
> is just
> as good at spotting errors on ECC as non-ECC. With ECC enabled,
> you'll need
> seriously messed up ECC before it'll be detected.
except with ECC disabled, the extra 8
On Mon, 5 Dec 2011, Ljubomir Ljubojevic wrote:
Vreme: 12/05/2011 12:00 PM, John R Pierce piše:
On 12/05/11 2:57 AM, Ljubomir Ljubojevic wrote:
Download Hiren's BootCD and use bundled Memory Test if your way is
complicated.
that won't do much to detect soft ECC errors, will it?
They are (t
Vreme: 12/05/2011 12:00 PM, John R Pierce piše:
> On 12/05/11 2:57 AM, Ljubomir Ljubojevic wrote:
>> Download Hiren's BootCD and use bundled Memory Test if your way is
>> complicated.
>
> that won't do much to detect soft ECC errors, will it?
>
They are (there are 4-5 apps) checking various patter
On 12/05/11 2:57 AM, Ljubomir Ljubojevic wrote:
> Download Hiren's BootCD and use bundled Memory Test if your way is
> complicated.
that won't do much to detect soft ECC errors, will it?
--
john r pierceN 37, W 122
santa cruz ca mid-left coas
Vreme: 12/05/2011 10:24 AM, Rob Kampen piše:
> However I put a brand new - never used 120G drive in and it too shows
> these errors - something doesn't seem right
> Getting too tired to think straight so I'll leave it limping along until
> tomorrow
> Thanks for thoughts
Download Hiren's BootCD and
Rob Kampen wrote:
> John R Pierce wrote:
>> On 12/05/11 12:17 AM, Rob Kampen wrote:
>>> Swapped the memory between DIMM 2A and DIMM 2B - still get fault in
>>> row 3, channel 0 - thus did not move with the RAM??
>>> Next reboot I'll try swapping 1A and 1B
>>
>> often an indication the problem is bo
John R Pierce wrote:
On 12/05/11 12:17 AM, Rob Kampen wrote:
Swapped the memory between DIMM 2A and DIMM 2B - still get fault in
row 3, channel 0 - thus did not move with the RAM??
Next reboot I'll try swapping 1A and 1B
often an indication the problem is board/socket related rather t
On 12/05/11 12:17 AM, Rob Kampen wrote:
> Swapped the memory between DIMM 2A and DIMM 2B - still get fault in
> row 3, channel 0 - thus did not move with the RAM??
> Next reboot I'll try swapping 1A and 1B
often an indication the problem is board/socket related rather than
memory DIMM. unless
Rob Kampen wrote:
Hi List,
I've been getting the following EDAC memory errors
EDAC MC0: CE page 0xeb0dd, offset 0x0, grain 4096, syndrome 0x45, row
3, channel 0, label "": i82875p CE
and from this seeing that these errors have been corrected.
Checking cat /sys/devices/system/edac/mc/mc0/csrow3/
9 matches
Mail list logo
