On Wed, 24 Jul 2013 10:36:36 -0700, John R Pierce wrote:
> note thats 5 miles in open space.
>
> you said the router is in the middle of the house, what all is between
> it and your 'BBQ' ?
The Negear N600 router is in the middle of the house, and it's only about
18 dBi and, I think, about
On Sat, 27 Jul 2013 02:04:05 +0300, Eliezer Croitoru wrote:
> By the way the nanobridge is nice but since it has so much Dbm in it you
> should try to open the case and verify what bugs are inside to make sure
> it's not "just works" like sisco.
I'm not sure *what* that meant!
_
Here is the error message:
http://i41.tinypic.com/2zz71bp.png
Wireless Network Authentication Required
Unlock Keyring: The application 'NetworkManager Applet'
(/usr/bin/nm-applet) wants access to the default keyring,
but it is locked.
The funny thing is,
(a) I've never seen this message befor
On Wed, 24 Jul 2013 08:04:40 -0500, Johnny Hughes wrote:
> In any network subnet, a default gateway is required to talk to any
> other subnet ... this is not a CentOS thing, it is a TCP/IP thing.
I saved your wonderful explanation (so that I may re-read it whenever
I need to make a gateway decisi
On Tue, 23 Jul 2013 23:03:00 -0700, John R Pierce wrote:
> you should be able to get 300 feet of mostly open space with a simple
> panel antenna
Understood. The Nanobridge M2 may be far more than I need.
But, it should work as it's advertised to go five miles.
All I need is a few hundred feet.
3 metric 2
=> default via 192.168.1.1 dev wlan0 proto static
This shows I once messed with the gateway long ago
(currently commented out):
$ cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=rock
#GATEWAY=192.168.1.1
Do I have any other Linux commands whi
0 0 0 wlan0
I think this shows similar information:
$ ip route show
=> 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.3 metric 2
=> default via 192.168.1.1 dev wlan0 proto static
And, I must have edited the gateway in the past, because of this comment:
$ cat /etc/sysconfig/net
On Wed, 24 Jul 2013 01:09:29 -0400, Darr247 wrote:
> that would result in an EIRP of almost 13W, or about 30 times the
> legal limit for licensed HAMs on channel 6 and below in the 2.4GHz band,
> or 60 times the legal limit unlicensed, unless you use a highly
> directional antenna. But that als
On Wed, 24 Jul 2013 01:09:29 -0400, Darr247 wrote:
> What brand/model is the home broadband router, by the way?
Netgear N600. I bought it in a moment of weakness; but it's far
too anemic to make it outside by the BBQ where I want to set up
the computer.
So, my goal is to connect the Nanobridge M
On Tue, 23 Jul 2013 21:14:02 -0400, Darr247 wrote:
> But why not just see what IP, Gateway and DNS Servers your home router
> gives eth0 via DHCP and duplicate those settings statically? (presuming
> it's also the 192.168.1.x /24 network)
I only partially understand what I *think* you're trying
On Tue, 23 Jul 2013 23:10:44 +, Rock wrote:
> I didn't want to complicate things, but whenever I use the GUI from right
> clicking on the four bars, the same thing happens (eth0 disconnects after
> a few minutes):
Maybe I was editing it wrongly.
How does this look?
http://i
On Tue, 23 Jul 2013 16:05:23 -0700, John R Pierce wrote:
> https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/ch-NetworkManager.html
That reference doesn't say much about what to set the gateway to:
http://i41.tinypic.com/1z2n6uv.jpg
Reading sect
On Tue, 23 Jul 2013 16:02:18 -0700, John R Pierce wrote:
> service NetworkManager status will undoubtedly say its running
Hi John,
It doesn't even have to be queried as root; it *does* say it's running:
$ service NetworkManager status
=> NetworkManager (pid 2455) is running...
> so, set the ab
On Tue, 23 Jul 2013 17:54:13 -0400, Steve Thompson wrote:
> Probably need NM_CONTROLLED=no in ifcfg-eth0.
$ sudo updatedb; locate ifcfg-eth0
=> /etc/sysconfig/networking/devices/ifcfg-eth0
=> /etc/sysconfig/networking/profiles/default/ifcfg-eth0
$ grep NM /etc/sysconfig/networking/devices/ifcfg-
On Tue, 23 Jul 2013 14:50:35 -0700, John R Pierce wrote:
> the interface is probably configured for DHCP via
> /etc/sysconfig/network-scripts/ifcfg-eth0 and your system is
> undoubtedly running network-manager.
I don't know *how* to tell if I'm running network-manager, but,
I'm running whatev
QUESTION:
Why does my Centos 6.4 laptop keep wiping out my eth0 IP address?
SUMMARY:
a) I set the IP address of eth0
b) Everything works fine for 2 to 5 minutes
c) Then, that eth0 IP address is (somehow?) wiped out
I frustratingly repeat that abc process (over and over and over again)
BACKGROUND:
On Mon, 22 Jul 2013 22:00:06 -0600, Frank Cox wrote:
> Using gconf-editor, unset /apps/gnome-packagekit/enable_font_helper
I hadn't even known that existed!
Thanks for the suggestion.
Let's see if it works:
http://i43.tinypic.com/2rxe6ix.png
___
Cen
Quite a few times a day, both the latest Pan & Firefox
available in standard CentOS repositories elicit what
(now) appears to be a CentOS request to install fonts,
e.g.: http://i39.tinypic.com/2i7qm2p.png
This latest message says:
Pan newsreader wants to install fonts
- Thai
- Cherokee
At
On Wed, 17 Jul 2013 15:57:24 +, David G. Miller wrote:
> As soon as I run the USB storage app the phone's SD cards
> show up on the system the phone is attached to as UBS storage devices.
> Have you looked for a USB storage app?
>From the previous thread on accessing camera files on Androi
On Mon, 03 Jun 2013 16:55:47 -0400, Scott Robbins wrote:
> I don't see anything to add--you linked to the forum thread, which covers
> most of the information we have had here.
Just for the record, for the past two weeks, for whatever (unknown) reason,
I have been unable to mount the phone in PT
On Tue, 16 Jul 2013 23:36:59 -0600, Frank Cox wrote:
> Can that phone connect to a wireless access point and run a ftp or sftp
> session
> or something similar to that?
That might be a good idea ... if it can do that.
Grepping the user manual for the word "wifi" or "wi-fi" or "802.11":
https
On Tue, 16 Jul 2013 08:36:48 -0700, John Doe wrote:
> I did not follow the whole thread but, the doc seems to talk about
> a "mass storage" mode...
> https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88616
> It does not work without special drivers?
I'm still failing to access
On Tue, 16 Jul 2013 12:25:00 +, Rock wrote:
> I wonder if my Centos bluetooth is working (I know the Motorola V3re RAZR
> bluetooth works to the speakerphone in the car).
BTW, to at least focus on the right direction, which *direction*
should I focus on getting working?
Do I set:
A)
On Tue, 16 Jul 2013 12:21:57 +, Woehrle Hartmut SBB CFF FFS (Extern)
wrote:
> it realizes the telephone part (modem and ISDN),
> but nothing about a storage device that you will need.
> When googling I found a user saying that "moto4lin" can be used to download
> photos
> (http://linuxgaze
On Tue, 16 Jul 2013 08:05:52 -0400, Phil Gardner wrote:
> many of the recent android phones are using MTP as opposed to
> USB mass storage
MTPfs is problematic on Centos, so I don't think that will work.
Even so, this RAZR V3re was built sometime around 2004 or 2005, so,
I doubt it's using anyt
On Tue, 16 Jul 2013 06:58:32 +, Woehrle Hartmut SBB CFF FFS (Extern)
wrote:
> What does dmesg say when you plug that device in?
> Is there an output when using lsusb and does it correspond to your devices?
$ lsusb
REPORTED:
Bus 003 Device 002: ID 22b8:4902 Motorola PCS Triplet GSM Phone (A
I have a mini-USB cable, but simply connecting a Motorola RAZR
to a Linux (Centos 6) PC to download stored pictures doesn't work,
at least not automatically.
Any idea what I need to do to get Centos to recognize that a
Motorola RAZR V3 is plugged in as a USB device?
(I don't have a data plan o
On Thu, 04 Jul 2013 22:50:33 +0200, Markus Falb wrote:
> if you post the first time to a mailing list per gmane
> then gmane will send you a mail that you must answer.
UPDATE:
Ah. *That* was the problem!
Lars had written back, but his answer was unhelpful.
He had written, verbatim:
"If you c
On Thu, 04 Jul 2013 11:16:55 +0200, Leon Fauster wrote:
> why not asking them http://gmane.org/faq.php ?
It's not in that FAQ, nor in the web page for the pan users group.
I did ask "Lars" but he controls gmane, not the pan users group.
Amazingly, the pan users group just (apparently) assumes yo
just want that USENET group to work like *this* USENET group, where
I can post using a server:port login:password combination such as we use here:
Server: news.gmane.org Port: 119
Login: blank Password: blank
User: Rock
I've looked here (http://dir.gmane.org/gmane.comp.gnome.apps.pan.use
On Sat, 22 Jun 2013 18:16:44 +0200, Ljubomir Ljubojevic wrote:
> Have you set proper java alternative (default java to use)? Maybe it
> requires specific java version.
Unfortunately, I've set up nothing overt with respect to Java, so this
is all I know about the java that is installed currently:
On Thu, 20 Jun 2013 06:34:38 +, Rock wrote:
> Given that information, what avenue would you pick to install Pinta on a
> 64-bit CentOS 6.4 laptop to test it out?
Now that I know the arrowing isn't implemented yet; and that it's
problematic to install on CentOS, I&#
On Fri, 21 Jun 2013 01:14:16 +, Rock wrote:
> Can you please be so nice and report this ideas on Pinta's idea web page:
For the record, I did post this screenshot summary to the Pinta Developers
Group:
--- < warning > long ... slightly off topic < / warning >
On Thu, 20 Jun 2013 15:11:32 +, Rock wrote:
> Someone much smarter than I am already failed today due to dependencies:
Here's a response from the Pinta Developer's Group today:
https://groups.google.com/forum/?fromgroups#!topic/pinta/JiJoNTNCGFA
[quote]
IgorZ
Currently th
On Thu, 20 Jun 2013 11:43:08 -0500, Les Mikesell wrote:
> Have you looked for or tried anything in java like
> http://www.heliospaint.com/.
The description looks enticing.
I couldn't find anything in the aforementioned repos; so I downloaded
the java applet.
But nothing happened when I ran:
$
On Thu, 20 Jun 2013 16:37:42 +0100, Nux! wrote:
> Well, Shutter is more than enough for my needs, but if you _must_ use
> Pinta, have you tried running it in Wine?
I abhor Wine, and feel that, over time, I should strive to find the best
native Linux programs to do the job.
At the moment, nothin
On Thu, 20 Jun 2013 09:32:41 +0100, Nux! wrote:
> install Shutter; does what you said and more.
I have had Shutter all along on my CentOS 6.4 laptop.
Here's how Shutter compares to Paint.NET on those 3 key annotation items:
(IMHO)
1. Curved & dashed arrows:
Shutter arrows are primitive and d
On Thu, 20 Jun 2013 10:05:29 +0200, Ljubomir Ljubojevic wrote:
> You can try installing package for Fedora 14
> You can also take .src.rpm from Fedora 14 and try to recompile
Someone much smarter than I am already failed today due to dependencies:
"Pinta looks interesting. I had been using Js
A screenshot editor needs to do a few things - but it must do these three
things easily and well:
1. Draw curved and straight arrows, dotted or solid line, with various
end dots and points
2. Draw open circles of various shapes to highlight areas of interest
3. Text easily without having to pre-
On Mon, 03 Jun 2013 16:55:47 -0400, Scott Robbins wrote:
> I don't see anything to add--you linked to the forum thread, which covers
> most of the information we have had here.
Thanks. Now I'll go back to my file recovery problems!
:)
___
CentOS maili
On Mon, 03 Jun 2013 16:41:29 +0200, Louis Lagendijk wrote:
> testdik can work on a disk image, so I recommend using that. Don't risk
> chaging the original disk (although testdisk is not supposed to touch it
> IIRC)
> /Louis
Thanks Louis for sticking with me. I do greatly appreciate your help!
I
On Mon, 03 Jun 2013 07:02:33 -0400, Scott Robbins wrote:
> perhaps a feature request
OK. Please take a look at the bug and feel free to correct
anywhere that I err or misrepresent the problem.
If nobody corrects anything, I'll know you didn't look :)
(because I really can't have accurately por
On Sun, 02 Jun 2013 11:08:28 -0400, Scott Robbins wrote:
> I thought we're having the problem with RHEL6. (and offshoots).
What's a good one-line description of the problem?
Is it this?
RHEL6 mtpfs does not properly mount Samsung Galaxy SIII in MTP media mode
If not, would someone kindly corre
On Sun, 02 Jun 2013 11:08:28 -0400, Scott Robbins wrote:
> I thought we're having the problem with RHEL6
My mistake. I don't really understand any of this, so,
I'm really *not* the right guy to file the bug report,
as I'm out of my league. I can "append" to it though.
:)
___
On Sun, 02 Jun 2013 16:01:05 +0200, Markus Falb wrote:
> You don't have to purchase a redhat subscription to file into their bugzilla.
OK. I opened an account, and can file the bug report:
https://bugzilla.redhat.com/enter_bug.cgi
What should I say?
I'm confused how to write that bug report so
On Sat, 01 Jun 2013 20:49:52 -0400, Scott Robbins wrote:
> Still, as of today, I'm way ahead of where I was before reading your post.
>
> Rock, I can almost certainly make an x86_64 rpm for you, but it would
> probably require that later libmtp which might cause its own issue
On Sat, 01 Jun 2013 15:22:03 -0400, Scott Robbins wrote:
> http://marcofalchi.blogspot.com/2012/02/android-ics-usb-storage-on-fedora-16.html,
> downloaded the tarball from the link on the page, ran .configure && make &&
> sudo make install.
> As for libmtp, rpm -qi shows that I'm using the standar
On Sat, 01 Jun 2013 16:40:46 +, Rock wrote:
> Now comes the biggie, backing up the entire 150MB disk:
> Q: Maybe I should have used the "conv=noerror" option
> as suggested in the dd wikipedia entry?
> $ sudo dd if=/dev/sdc1 of=/mnt/image.dd bs=1M
The dd finished ba
On Sat, 01 Jun 2013 16:00:06 +, Rock wrote:
> OK. This is where we don't want to make a mistake!
> Q: Does the block size matter?
I kicked it off, as follows, and will wait to report:
$ cd /mnt
$ script recovery.log
==> Script started, file is recovery.log
Backing up the M
g in the good disk & note where it mounted:
==> Jun 1 08:26:39 rock kernel: usb 1-1.2:
==> new high speed USB device number 5 using ehci_hcd
==> Mounted /dev/sdb1 (Read-Write, label "SignatureMini", NTFS 3.1)
==> Cmdline options: rw,nosuid,nodev,uhelper=udisks,uid=50
are 500MB USB disk, so,
I'm about to run the procedure on the "bad" 150MB disk as we type.
Plugging in the spare 500MB disk, I run the suggested command:
a. Open a wide window & type "sudo tail -f /var/log/messages"
b. Plug in the spare 500MB USB disk & look for
On Sat, 01 Jun 2013 23:30:04 +1000, Anthony K wrote:
> 1. sudo lsmod > file-without-s3
Creates a file with headers "Module, size, & used by".
> 2. ensure S3 is locked then connect to PC
OK. Done.
> 3. sudo lsmod > file-with-locked-s3
OK. Done.
> 4. sdiff-s file-with-s3 file-with-locked-s3| e
On Fri, 31 May 2013 20:50:00 +, Rock wrote:
> So, I guess the question is:
> Q: How do I install rhythmbox & vlc with the newer libmtp?
To follow up on that question, here's a summary that I *think*
is correct.
0. The real solution is to have libmtp updated by the Redhat
deve
On Mon, 27 May 2013 16:31:01 -0400, Scott Robbins wrote:
> As I mentioned, I've only used the file browser method (and
> things were accessible) in a more recent distribution.
> Otherwise, I've used the manual commands.
> Sorry I can't be of more help here.
Hi Scott,
You've been a GREAT help, a
On Sat, 11 May 2013 22:28:53 +0200, Louis Lagendijk wrote:
> here is a quick list of what to do:
Thanks. I needed this step-by-step procedure; and I'll report back.
I bought a new 2TB disk, named "My Passport".
I will test the procedure with a spare 500GB disk, named "Signature Mini".
> 1) connec
On Sat, 11 May 2013 23:31:07 +1000, Anthony K wrote:
> dd if=/dev/sda of=/path/to/hdd-image-file.img bs=4M
I'm not sure how to figure out what to put into that dd command.
Q: Is this the right sequence given the disk information below?
1. Boot to Centos 6
2. Plug in the old (500GB) & new (
On Fri, 31 May 2013 11:50:03 -0700, John R Pierce wrote:
> leave it in the mode you want the USB
> connection to operate in.
Thanks. I'll leave the Android 4.0.4 phone in PTP mode then.
In order to be thorough, I wanted to write up a summary to
help others; so, to see if it was the updated libm
On Fri, 31 May 2013 16:57:32 +, Rock wrote:
> I'm not sure if there is a graceful way to disconnect;
> and, I'm not sure if I should leave the phone in PTP mode;
In summary, the solution to transferring files by wire from
the Samsung Galaxy S3 (and other Android 4.x phones)
On Thu, 30 May 2013 14:04:33 -0700, sms wrote:
> I thought that the Galaxy S3 has PTP mode.
> If so, put the phone in PTP mode.
> https://bugzilla.gnome.org/show_bug.cgi?id=671906
The bug report doesn't show *how* to put the Samsung Galaxy S3
in "PTP" mode (which I know nothing about).
Googling
On Tue, 28 May 2013 09:25:57 +0200, Nicolas Thierry-Mieg wrote:
> To summarize, you did the right things as far as libmtp is concerned.
> Now the issue lies beyond that, probably with gvfs-photo2 as suggested
> by Farkas via Ljubomir, but I can't help you much with that. Except
> Farkas suggest
On Mon, 27 May 2013 19:27:28 +0200, Ljubomir Ljubojevic wrote:
> You should have just used two commands:
> sudo yum remove vlc
I guess I should have done it this way?
$ sudo yum remove vlc
$ sudo yum remove rhythmbox
Or would you have left rhythmbox in place?
> and
> yum update
> Yum will alw
On Mon, 27 May 2013 12:22:26 -0400, Scott Robbins wrote:
> You can always use Uvh which should update.
> If there is nothing to be updated, Uvh will just install.
Thanks. Next time I'll use "Uvh".
> As I think I said, I removed the older version first.
I "thought" I removed the older version
On Sun, 26 May 2013 01:46:34 -0400, Scott Robbins wrote:
> If you want 64 bit then
> http://home.roadrunner.com/~computertaijutsu/libmtp-1.1.6-0.el6.x86_64.rpm
> Note that if you hav VLC installed, this will conflict with its required
> version of libmtp.
Thanks. I made a bunch of guesses how
On Sat, 25 May 2013 10:08:45 +0200, Ljubomir Ljubojevic wrote:
> Requested 'libmtp >= 1.1.0' but version of libmtp is 1.0.1
> (libmtp is provided by RHEL, so it's not so easy to upgrade)"
I am not a coder, nor have my compiles ever gone well; so I can't
do this; but is it possible for someone who
On Sat, 25 May 2013 10:08:45 +0200, Ljubomir Ljubojevic wrote:
> So best course of action could be to ask Red Hat to upgrade libmtp
> add mtp packages from Fedora, and only if they refuse to,
> ask RPMFusion or Repoforge repositories to add them to their repo.
Wow. Thanks for all that detective
On Fri, 24 May 2013 12:56:43 -0700, Keith Keller wrote:
> would you ask Upstream when rpmforge was going to carry
> these packages?
Ah, I see. Sorry for being dense.
I understand. I'm not sure *who* handles the MTP package,
but, what you're saying is whomever it is that feels they
should own i
On Fri, 24 May 2013 11:59:34 -0700, Keith Keller wrote:
> Only the CentOS* repositories are official CentOS repos.
If I could, I'd stick with those official repositories.
Looking at my installation log file, it seems that I've
only needed the non-official repositories about 30 times
in the past
On Fri, 24 May 2013 13:45:59 +0200, Ljubomir Ljubojevic wrote:
> I also have FSync set-up to daily backup all important files via SFTP.
I found out the following, if it matters:
QUOTE 1:
You can use tools like gphoto or digikam to access the images, should
be just plug the phone to the computer
On Fri, 24 May 2013 09:05:09 -0700, Keith Keller wrote:
> What do you think are the "standard" repositories?
>From the school of hard luck, the repos I was forced to install are:
$ ls -l /etc/yum.repos.d
adobe-linux-x86_64.repo
CentOS-Base.repo
CentOS-Debuginfo.repo
CentOS-Media.repo
CentOS-Media
On Fri, 24 May 2013 08:30:51 -0700, Craig White wrote:
> [USB] is simply not an option for main memory but an option for expansion
> cards.
I do appreciate your explanation & apologize for my rant.
So that I better understand, does that mean if I bought a microSD card,
and stored the photos fr
On Fri, 24 May 2013 08:30:51 -0700, Craig White wrote:
> obviously beyond you.
Indeed! :)
I'm just a regular Joe user of a smartphone & Centos (which is the OS choice
of my employer who provides the laptop).
While most of you, on Centos, are experienced with compiling source code
(e.g., MPT sou
On Fri, 24 May 2013 08:21:09 -0700, Keith Keller wrote:
> It's intentional. RHEL deliberately follows older,
> more stable versions of software,
Good point!
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On Fri, 24 May 2013 08:03:52 -0700, Craig White wrote:
> I think most people are using cloud storage with the smart phones these days
I understand.
Anyway, here's a summary for the next person with this same problem
(Note: This affects other phones but I don't know which are affected.)
Summary
On Thu, 23 May 2013 23:40:17 -0400, Scott Robbins wrote:
> On more current distributions, that is, just about everything but RHEL6 and
> clones, one can install a version of mtpfs, simple-mtpfs on Fedora, for
> example, jmtpfs on Arch, and get it to work.
Just my luck that Centos is one of those
On Thu, 23 May 2013 19:47:26 -0700, Keith Keller wrote:
> I'd install an scp or sftp client on your Android and use that for file
> transfer to your CentOS box, as suggested by many folks on that thread.
> There are probably a bunch of clients in the Play store.
I guess the point would be to set
On Thu, 23 May 2013 22:03:48 -0700, centos-CKKfVXLCbtqEK/hMebVsMw wrote:
> I had the same problem until I stumbled upon the solution:
> Airdroid
Thanks for that tip!
I just installed AirDroid on the Samsung Galaxy S3, and tested it out.
On single files, it seems to work exactly like Kies Air do
SUMMARY:
Maybe this all boils down to "how do we debug when Java fails on Centos 6?
DETAILS:
If you don't have the Samsung Galaxy S3, then you might not realize how
frustratingly difficult it is to transfer multiple files from the
smartphone to Centos 6.
It should be as simple as hooking up a
On Sat, 11 May 2013 15:35:31 +, Rock wrote:
> Currently I'm at day 3, and almost done recovering the
> files; but the results (sadly, due to my error in the
> Recuva settings) are flatter than the plains of Kansas!
Just for the record, Recuva finished at 66 hours
On Sat, 11 May 2013 11:23:35 -0400, Fred Roller wrote:
> There are some linux solutions I had at the time and I
> am trying to dig up my notes.
Thanks if you can find them.
Currently I'm at day 3, and almost done recovering the
files; but the results (sadly, due to my error in the
Recuva sett
On Sat, 11 May 2013 21:27:59 +1000, Anthony K wrote:
> I'd suggest you still make a copy of the disk with dd and
> work on the image!
Since I may only get one shot, and since I've never formatted
a USB hard drive, nor ever even mounted one, how does this procedure
look for my 149GB NTFS disk?
> For the record, this is the Microsoft Support KB I had followed:
> http://support.microsoft.com/kb/176646
Just by way of update, it's currently at 95,000 of about
100,000 files; so I would expect the Recuva file recovery
to complete by tomorrow morning (day 3):
http://www5.picturepush.com/pho
On Fri, 10 May 2013 17:27:34 +, Rock wrote:
> And, I did google for the solution for a corrupt disk and I did follow
> Microsoft Support instructions.
> http://support.microsoft.com/kb/176646
>
> Of course, in hindsight, I *should* have run a dd first ... but I had
> not e
On Fri, 10 May 2013 13:04:01 -0400, m.roth-x6lchVBUigD1P9xLtpHBDw wrote:
> I'd guess that whatever infected your system had a protection mechanism,
> so that if you tried to backup the whole drive, it would mangle
> something on the recipient drive, so that *it* couldn't be examined
> easily.
I u
On Fri, 10 May 2013 08:32:35 -0400, Yves Bellefeuille wrote:
> I think that the user was too quick to assume that the computer "had a
> virus or something". If he thought it might have a virus, why didn't he
> try an anti-virus program first?
Good question. The Windows XP machine is an old Dell B
On Thu, 09 May 2013 18:53:30 -0700, Keith Keller wrote:
> Is it already "putting" your files somewhere? If so it's almost
> certainly too late to throw a linux recovery tool at it.
Nothing, to my knowledge, is being written to the external NTFS
USB hard drive.
The files are being put on the C:
On Thu, 09 May 2013 16:51:48 -0400, m.roth-x6lchVBUigD1P9xLtpHBDw wrote:
> Are you sure that the FAT was mangled, and not just the MBR?
How can I tell?
All I know is the following:
a) The WinXP PC had a virus or something making it slow
b) So I decided to re-install the WinXP OS
c) I connected t
My 15GB backup USB drive somehow got "corrupted" such that
a "chkdsk /f E:" on WinXP removed the file allocation table
(or whatever) making the NTFS drive appear empty.
I tried Windows Recuva freeware to recover the files, and
it has been working for 24 hours; but it has dumped about
65,000 files
On Thu, 09 May 2013 11:55:58 +0200, Louis Lagendijk wrote:
> Right, it requires glib2(-devel) >= 2.26.0 and gmime(-devel) >= 2.5.5
> You're in for a lot of work as at least the dependency on glib 2.26 is
> real
I'm really no good at compiling unless all I have to do is
issue the make command. So,
Q: What is the recommended method to obtain Pan 0.136+ (with SSL) for Centos 6?
I've been successfully using Pan 0.135 from the RPMForge repository
for about a year now:
$ yum --noplugins --showduplicates --enablerepo \* --disablerepo
c6-media,\*-source,\*debug\* provides "*/pan"
==> 1:pan-0.13
On Sun, 05 May 2013 14:34:36 +0200, Markus Falb wrote:
> I think that with thunderbird you get a kind of first start setup wizard.
> *skip that* ("I think I'll configure my account later")
>
> Preferences (you *will* find that ;-) -> Account Settings -> Account Actions
> -> Add Other Account ->
On Sat, 04 May 2013 05:39:24 +, Stef wrote:
> Try xpn.
On Sat, 04 May 2013 10:49:46 +, J G Miller wrote:
> you can get the source code from
> http://xpn.altervista.ORG/index-en.html
Since no easily-found repository existed for xpn:
$ yum --noplugins --showduplicates --enablerepo \* --disa
On Sun, 05 May 2013 07:09:01 +, Rock wrote:
> I'm debugging (without any debugging tools) ...
I was easily able to post to Aioe using Knode:
http://www2.picturepush.com/photo/a/12853710/img/12853710.png
So, it must be the Mixmin SSL setup that's bad.
Do you see anything wr
On Sat, 04 May 2013 13:53:53 +, Rock wrote:
> $ sudo yum install kdepim -y
Well, it's installed. A bunch of junk came with knode, so, that's
definitely unfortunate. Here's a log of the setup results:
$ knode -v
==> Qt: 4.6.2, KDE: 4.3.4 (KDE 4.3.4), KNode: 4.3.5
$ kno
On Fri, 03 May 2013 12:32:28 +0200, Markus Falb wrote:
> What exactly do you mean with that?
When setting up Thunderbird for NNTP, TB asked questions like
"incoming and outgoing user name", which are meaningless for NNTP
(AFAIK); and TB didn't give any place to add any other server than
an SMTP
On Fri, 03 May 2013 12:27:01 +0200, Markus Falb wrote:
> you likely missed it because of all the language rpms.
> As rex told us ;-)
Ah, indeed!
I had seen the "personal information manager" but I was looking
for it to say "nntp usenet reader" or something of the sort since
an nntp client isn'
On Thu, 02 May 2013 20:36:53 -0500, Rex Dieter wrote:
> I like knode (in kdepim rpm)
Googling whether Knode handles SSL:
https://bugs.kde.org/show_bug.cgi?id=43875
It looks like SSL was implemented in KDE 4.0:
Volker Krause 2007-05-21 18:15:08 UTC, Implemented SSL for KDE4.0.
So, looking for
On Wed, 01 May 2013 18:20:46 +, Rock wrote:
> Had Pan native SSL support, this wouldn't have been a problem.
I found out elsewhere that the latest Pan handles SSL, but
the one in the rpmforge repository doesn't. Every time I
try to compile source, it's a disaster, so, fo
Is there a good nntp client for Centos 6 that handles SSL native?
It was difficult, to say the least, on Centos anyway, to get
Pan to post to Mixmin servers, which require SSL (so we have
to use Stunnel to add SSL capabilities to Pan) on Centos.
Had Pan native SSL support, this wouldn't have bee
On Tue, 16 Apr 2013 09:19:23 +0200, Nicolas Thierry-Mieg wrote:
> Note that there are now 4 branches of the nvidia driver (3 legacy +
> latest), each supporting different devices. To know which branch you
> need, simply install nvidia-detect from elrepo and run it.
> http://elrepo.org/tiki/nvidi
On Tue, 16 Apr 2013 09:55:27 +0100, James Pearson wrote:
> Any Xorg crash details will be in /var/log/Xorg.?.log - however, if Xorg
> has restarted since the crash, then the error should be in
> /var/log/Xorg.?.log.old
>
> The error may also be in one of the log files in /var/log/gdm/
Thanks J
1 - 100 of 136 matches
Mail list logo
