Hi list,
Please pardon and forgive my post, the issue was resolved. It is due to the
VMWare's snapshot manager, it uses the snapshot disk instead of the real disk
that was somehow removed.
Thank you,
-Allan
- Original Message -
| From: "allan registos"
| To: "centos"
| Sent: Saturday
Hi list,
Good day to you all,
Please correct me if this is the right list for posting this problem I am
having with CentOS, but here is the details of the problem:
I have a VMware guest running under Centos 6.5/64-bit. I rarely rebooted this
OS, and was using it as my backend for some of my
On Fri, Apr 21, 2017 at 08:34:29AM -0700, Kenneth Porter wrote:
> --On Thursday, April 20, 2017 9:10 AM -0400 Fred Smith
> wrote:
>
> >problem is, where is it getting the old address from? It isn't in
> >the resolv.conf before the vpn is started, and it is not in the NM
> >setups, anywhere, and i
On 04/21/2017 12:49 PM, Frank Thommen wrote:
It seems, that this is not related to local disk space - as I initally
thought - but to too small memory. It only happens with VMs with
little RAM (1024 MB). As soon as we raise the available memory to
2048 MB, kickstarting works fine. The RHEL
Hi,
while kickstarting our virtual machines with PXE we often run into
kickstart/anaconda failing with
[...]
[...] dracut-mount[xxx]: Warning: Can't mount root filesystem
[...] dracut-mount[xxx]: Warning: /dev/root does not exist
[...] dracut-mount[xxx]:/lib/dracut-lib.sh: line 1030: echo wri
Hi Tris,
On 04/19/2017 06:07 PM, Tris Hoar wrote:
On 18/04/2017 15:54, Frank Thommen wrote:
Hi,
I am currently struggling with the right way to configure a bonding
device via kickstart (via PXE).
I am installing servers which have "eno" network interfaces. Instead of
the expected bonding dev
Le 21/04/2017 à 18:44, m.r...@5-cent.us a écrit :
> Firewall open on the port... no, you said it sends some signal, since it
> prints out a blank page. And CUPS on your box is configured to understand
> the printer, right?
[Much later.]
I just spent a few unnerving hours, and I found the solution
Le 21/04/2017 à 18:44, m.r...@5-cent.us a écrit :
> Firewall open on the port... no, you said it sends some signal, since it
> prints out a blank page. And CUPS on your box is configured to understand
> the printer, right?
I have a few sandbox machines in this office, so I experimented some
more,
Nicolas Kovacs wrote:
> Le 21/04/2017 à 17:32, m.r...@5-cent.us a écrit :
>> Is there a .ppd for the printer in /etc/cups/ppd? Or is there a CUPS
>> print server on another system (we have all ours basically go through one
>> server).
>
> # ls /etc/cups/ppd/
> Officejet_Pro_8600.ppd
>
> This is a n
Le 21/04/2017 à 17:32, m.r...@5-cent.us a écrit :
> Is there a .ppd for the printer in /etc/cups/ppd? Or is there a CUPS print
> server on another system (we have all ours basically go through one
> server).
# ls /etc/cups/ppd/
Officejet_Pro_8600.ppd
This is a network-attached printer. All other
On 04/19/2017 02:12 AM, Zdenek Sedlak wrote:
On 2017-04-18 23:29, Paul E. Virgo wrote:
Hello!
Does anyone have any experience with installing CentOS 6 (specfically,
6.8), on a Dell T7910? I've tried at least a dozen installs,
everything gets configured, and when I have the system reboot, I ge
I have an application with is binary-only, does its job well, and is
only available for either libc5 (!) or early early glibc2.0 (!!). It has
been running on a Red Hat Linux 5.2 (NOT RHEL; RHL) server for a really
long time, and it honestly does its job and it's not easily replaced by
an open-s
Thanks. Good to know, and I will add this as a footnote to my howto.
I am currently, not tackling Samba. I tried a year ago without
success. My current domain server is ClearOS.
On 04/21/2017 11:38 AM, Kenneth Porter wrote:
Samba. Authentication won't work if the client and server have
dif
Once upon a time, William Warren said:
> Who do I contact about softwarecollections being offline? I am
> having to bypass that repo for right now and the packets disappear
> in the ether on their way..:)
http://status.fedoraproject.org/
Everything is red right now... :(
--
Chris Adams
__
Samba. Authentication won't work if the client and server have different
clocks.
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.o
Nicolas Kovacs wrote:
> Hi,
>
> I just installed CentOS 7 + KDE on a new workstation in my office. I
> tried to setup my printer, but the test page is blank. Here's some
> details.
>
> The printer is an HP OfficeJet 8600 Pro. It works perfectly with all
> other desktop clients running Slackware Lin
--On Thursday, April 20, 2017 9:10 AM -0400 Fred Smith
wrote:
problem is, where is it getting the old address from? It isn't in
the resolv.conf before the vpn is started, and it is not in the NM
setups, anywhere, and it isn't in any of the files in
/etc/sysconfig/network*, so where is it comin
On 04/21/2017 10:07 AM, William Warren wrote:
> Who do I contact about softwarecollections being offline? I am having
> to bypass that repo for right now and the packets disappear in the ether
> on their way..:)
There is currently a datacenter issue in one of the RH locations that
serves both Fed
Who do I contact about softwarecollections being offline? I am having
to bypass that repo for right now and the packets disappear in the ether
on their way..:)
William Warren
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/
On 04/21/2017 08:44 AM, Steve Clark wrote:
> Sorry for the noise I found it.
Thanks OK .. you can also find it in git here as well:
https://git.centos.org/summary/rpms!firefox
Currently, though not always, the CentOS-7 and CentOS-6 firefox build
from the same SRPM.
>
> On 04/21/2017 08:56 AM,
Hi,
I just installed CentOS 7 + KDE on a new workstation in my office. I
tried to setup my printer, but the test page is blank. Here's some details.
The printer is an HP OfficeJet 8600 Pro. It works perfectly with all
other desktop clients running Slackware Linux and HPLIP.
I installed hplip and
Sorry for the noise I found it.
On 04/21/2017 08:56 AM, Steve Clark wrote:
> Hi,
>
> Where is the source rpm for firefox-52 I can't seem to find it googling for
> it.
>
> Thanks,
> Steve
>
> On 04/21/2017 08:00 AM, centos-announce-requ...@centos.org wrote:
>> Send CentOS-announce mailing list sub
On 04/21/2017 09:25 AM, Denniston, Todd A CIV NAVSURFWARCENDIV Crane,
JXVS wrote:
From: Robert Moskowitz [r...@htt-consult.com]
Sent: Thursday, April 20, 2017 5:00 PM
To: CentOS mailing list
Subject: [CentOS] What besides Postfix should not start until
From: Robert Moskowitz [r...@htt-consult.com]
Sent: Thursday, April 20, 2017 5:00 PM
To: CentOS mailing list
Subject: [CentOS] What besides Postfix should not start until system time
set?
>
> So I have learned that Postfix should delay until Chronyd
Hi,
Where is the source rpm for firefox-52 I can't seem to find it googling for it.
Thanks,
Steve
On 04/21/2017 08:00 AM, centos-announce-requ...@centos.org wrote:
> Send CentOS-announce mailing list submissions to
> centos-annou...@centos.org
>
> To subscribe or unsubscribe via the World
On 04/20/2017 09:06 AM, James Pearson wrote:
> wwp wrote:
They obviously felt more comfortable instead released the older one on
EL6 this cycle, but I suspect that the newer 52.x ESR version will be
released during the next cycle.
>>> Indeed, the latest RHEL 6 update f
Send CentOS-announce mailing list submissions to
centos-annou...@centos.org
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.centos.org/mailman/listinfo/centos-announce
or, via email, send a message with subject or body 'help' to
centos-announce-requ.
27 matches
Mail list logo
