ompression fit.
> >> Maybe if you have a jig that holds the 2 syringes in a fixed position so
> >> they cannot move apart it can work.
> >>
> >> Best, BR
> >>
> >> -Original Message-
> >> From: CCP4 bulletin board [mailto:CCP4
, 2014 8:48 PM
To: CCP4BB@JISCMAIL.AC.UK
Subject: Re: [ccp4bb] Fabricating hamilton syringe coupler for LCP preparation
Here's my addition to Jim Fairman's reply:
You could use a pair of RN compression fittings (www.hamilton dot com part
number 55751-01) and a segment of HPLC tubin
jig that holds the 2 syringes in a fixed position so
>> they cannot move apart it can work.
>>
>> Best, BR
>>
>> -Original Message-
>> From: CCP4 bulletin board [mailto:CCP4BB@JISCMAIL.AC.UK] On Behalf Of
>> Daniel Anderson
>> Sent: Monday, December 1
t; they cannot move apart it can work.
>
> Best, BR
>
> -Original Message-
> From: CCP4 bulletin board [mailto:CCP4BB@JISCMAIL.AC.UK] On Behalf Of
> Daniel Anderson
> Sent: Monday, December 15, 2014 8:48 PM
> To: CCP4BB@JISCMAIL.AC.UK
> Subject: Re: [ccp4bb] Fabric
apart it can work.
Best, BR
-Original Message-
From: CCP4 bulletin board [mailto:CCP4BB@JISCMAIL.AC.UK] On Behalf Of Daniel
Anderson
Sent: Monday, December 15, 2014 8:48 PM
To: CCP4BB@JISCMAIL.AC.UK
Subject: Re: [ccp4bb] Fabricating hamilton syringe coupler for LCP preparation
Here'
correction: www.hamiltoncompany.com
addition: The compression fittings at least used to be available from
us.vwr.com part number 89187-0002.
On 12/15/2014 11:48 AM, Daniel Anderson wrote:
Here's my addition to Jim Fairman's reply:
You could use a pair of RN compression fittings (www.hamilton
Hi Thomas,
I have been doing LCP for a while and I am using the teflon ferrules that
come with the 250 uL RN syringes instead. So on one side you would have two
teflon ferrules and the other side you would have the ferrule that is
attached to the needle and another plastic ferrule. I have also had
Here's my addition to Jim Fairman's reply:
You could use a pair of RN compression fittings (www.hamilton dot com
part number 55751-01) and a segment of HPLC tubing. HPLC tubing within
my field of view can have an inside diameter as small as 0.005 inch.
hope that helps, Happy Merry, etc.,
Da
As a user of many of these coupling devices, I would highly suggest buying
your couplers pre-fabricated and avoiding many hours (and possibly days) of
headaches trying to manufacture these with your own hands.
Rigaku Reagents sells them:
https://www.rigakureagents.com/p-516-wizard-cubic-lcp-kit.as
Hi all,
I'm trying to put together some homemade syringe couplers following
the published instructions from the Caffrey group. I'm having a bit
of trouble with this part:
"The stainless steel ferrule of the second needle is removed and
placed on the free end of the coupling needle such that the
10 matches
Mail list logo
