..and to further rant..why would anyone want to cheat their way through
the ccie exam! Your hurting yourself because it's you who will feel the
pain when you are placed in a situation where that expertise will be required.
..no one on this study group wants to hear how you obfusc
..and to further rant..why would anyone want to cheat their way through
the ccie exam! Your hurting yourself because it's you who will feel the
pain when you are placed in a situation where that expertise will be required.
..no one this study groups wants to hear how you obfiscat
Anytime that you are going to be redistributing a protocol into another and
then back into that originating protocol you are going to have potential for
routing loops.
With that being said.the exam is designed to test your understanding of the
technology and if I were designing a scenario y
All,
On Volume 1 Lab 23 Section 23.3 your are asked to configure RED on interface
serial 0/1/0 on R6 with the following policy information.
Traffic marked with Precedence 0,3, or 5 set the following:
Threshold between 10 - 40 and a mark probability denominator
of 10
I unde
Sorry...workbook 1
Christopher Fata | 517.819.4713 | CCIE Written, CCNP, MCSE | netech |
www.netechcorp.com
-Original Message-
From: nickst...@yahoo.com [mailto:nickst...@yahoo.com]
Sent: Sunday, September 26, 2010 12:21 PM
To: Chris Fata; ccie_rs-boun...@onlinestudylist.com;
(ccie_rs
I am working on Lab 28 and need to setup MPLS with LDP.I ran the following
commands to begin the basic configuration of my MPLS: (only pertinent info
displayed)
Ip cef
Mpls ip
Mpls ldp router-id loopback 0
Mpls label protocol ldp
!
Int ser 0/0.25
Mpls ip
!
...and here is wh
All,
I figured out the issue...apparently after having a "Rumple Mints Shot" all
becomes clear Now only if this could be worked into the real lab day I
would be all set!
The issues was that I configured the VRF Green process under the serial
interface on R5 "nice"..but all is wor
All,
I have a question about Lab 27 task 27.11 which in reality is all of tasks 27.9
- 27.11
In these tasks your are asked to peer between R1 and R2 via BGP with R2
bringing in the routes from R1 into VRF RED. Also, you are asked to tag the
routes coming from R1 with a route-target as follows
In volume 1 lab 8 section 8.7 you are asked to not allow rip updates to go
across vlan 2567. Furthermore you are not allowed to make any changes to the
routers what-so-over.
To accomplish this task, on the switches I set vlan 2567 to be a private
isolated vlan and this solution worked sweet.
This senario calls for setting up a bgp confederation.
The confederation identifier in this case will be AS 109 with the peers being
the perspective 64xxx AS.
In this configuration, the world will see all the locations as AS 109.
Sent from my Windows Mobile® phone.Sent from my Windows Mobile®
The show frame map command is only going to show you dlci’s that have either
been statically mapped or learned via inverse-arp.
Example:
Router2#sh frame-relay map
Serial0/1/0 (up): ip 122.1.56.161 dlci 205(0xCD,0x30D0), static,
CISCO, status defined, active
Serial0/1/0 (up
Sh frame-relay pvc will show all the dlci's being distributed to you via
your frame cloud.
Christopher Fata | 517.819.4713 | CCIE Written, CCNP, MCSE | netech |
www.netechcorp.com
From: ccie_rs-boun...@onlinestudylist.com
[mailto:ccie_rs-boun...@onlinestudylist.com] On Behalf Of Bodnar, Edw
: Joe Astorino [mailto:jastor...@ipexpert.com]
Sent: Thursday, July 16, 2009 2:56 PM
To: Chris Fata
Cc: ccie_rs@onlinestudylist.com
Subject: Re: [OSL | CCIE_RS] Volume 3 Lab 1
This is a really mean trick : ) There is a hidden IOS command you need
for this. "no ppp chap ignoreus"
Group,
In volume 3 Mock Lab 1 Task 2.2 you are asked to setup a frame-relay
connection between router 4 and 5 using PPP over frame-relay. Utilizing
PPP over frame-relay implies that the configuration will use the
virtual-template configuration to accomplish the task, no problem.
I setup th
Group,
I have a question in regards to Lab 12 task 25 (Redistribution).
The task states that on router 2, you are to redistribute bgp AS 256
into rip and have BB1 see the hop count as 5 for routes originating in
AS 256 with all other routes learned via redistribution with a metric of
10. Al
15 matches
Mail list logo
