Regards.../om
On 28-Feb-2012, at 21:31, lina wrote:
> Hi,
>
> I am not experienced in below choice
>
> after issue the perl -MCPAN -e shell
>
> What approach do you want? (Choose 'local::lib', 'sudo' or 'manual')
>
> /dev/sda1
Hi,
I am not experienced in below choice
after issue the perl -MCPAN -e shell
What approach do you want? (Choose 'local::lib', 'sudo' or 'manual')
/dev/sda10 6.5G 515M
5
Hi,
Try to wait some time after making force install then press ctrl-c if it
doesn't end installation by itself.
You will receive info that "make_test failed but failure ignored because
'force' in effect".
Good questions are how long you need to wait until pressing ctrl-c( :) ) and
what exact
I'm trying to install Gtk on Freebsd 8.4 with the command 'perl -MCPAN
-e "install Gtk"'. I see that one of the dependencies is Glib. So when I
try to install Glib with the command in the subject line it hangs on
perl -M"ExtUtils::Command::MM" -e &qu
.perl.org/, the Perl Home Page.
[EMAIL PROTECTED] perl-5.8.1]# perl -MCPAN -e shell
Can't locate CPAN.pm in @INC (@INC contains:
/usr/lib/perl5/5.10.0/i386-linux-thread-multi /usr/lib/perl5/5.10.0
/usr/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.10.0 /usr/lib/pe
t;. If you have access to the
> Internet, point your browser at http://www.perl.org/, the Perl Home Page.
>
> [EMAIL PROTECTED] perl-5.8.1]# perl -MCPAN -e shell
> Can't locate CPAN.pm in @INC (@INC contains:
> /usr/lib/perl5/5.10.0/i386-linux-thread-multi /usr/lib/perl5/5.10.
ich may be found in the Perl 5 source kit.
Complete documentation for Perl, including FAQ lists, should be found on
this system using "man perl" or "perldoc perl". If you have access to the
Internet, point your browser at http://www.perl.org/, the Perl Home Page.
[EMAIL PROTE
Thanks for the reply Yitze.
I simply wondered whether there was any benefit. I haven't yet tried
the perl -MCPAN approach but have spent most of the day in cpan. I
would expect to see perl -MCPAN in an anutomated approach somewhere I
guess.
I have successfully updated some modules lo
On Thu, Apr 3, 2008 at 7:35 AM, LesleyB <[EMAIL PROTECTED]> wrote:
snip
> Which method is considered better - using cpan as a command at the
> command line or using 'perl -MCPAN -e ..'' ?
snip
The cpan script was added in Perl 5.8.1. It is a command line
interface t
I'm just guessing here, but I'm going to suggest that both methods
ultimately call the same code and are therefore equivalent. Though the
cpan command takes arguments, so it might speed stuff up.
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
http:
Hi
I'm using Linux for some perl play.
Which method is considered better - using cpan as a command at the
command line or using 'perl -MCPAN -e ..'' ?
Does using CPAN by either method above ensure the latest version of
any given module or does it give the latest modul
Yu Wang wrote:
Hi, All
I am curious about how to upgrade local module in 'perl -MCPAN -e shell'?
Thanks!
Yu
Hi,
From the CPAN shell, try
install MODULENAME
force install MODULENAME
like
install DBI
install DBD
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For
On 5/26/05, Yu Wang wrote:
> Hi, All
>
> I am curious about how to upgrade local module in 'perl -MCPAN -e shell'?
>
> Thanks!
>
> Yu
>
Do an install, this will replace and effectively upgrade the module.
There are exceptions, specific modules where this &
Hi, All
I am curious about how to upgrade local module in 'perl -MCPAN -e shell'?
Thanks!
Yu
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
<http://learn.perl.org/> <http://learn.perl.org/first-response>
On Fri, 10 Dec 2004, Jan Eden wrote:
> Is there any reason not to use it?
None at all.
I only steer people towards the `perl -MCPAN -e ...` version because
that is very likely to work on any recentish copy of Perl. On the other
hand, not all vendors seem to distrubute the `cpan` wrap
On Fri, Dec 10, 2004 at 11:03:37AM +0100, Jan Eden wrote:
> I used to use
>
> perl -MCPAN -e "install 'Some::Module'"
>
> to install modules. Now I discovered the cpan tool (by chance) which allows
> me to do:
>
> cpan Some::Module
>
>
Hi,
I used to use
perl -MCPAN -e "install 'Some::Module'"
to install modules. Now I discovered the cpan tool (by chance) which allows me
to do:
cpan Some::Module
The manual page (date: 2003-09-12) is pretty self-explaining - but the script
was never mentioned on this
- Original Message -
From: "Michael David" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, November 25, 2004 10:41 PM
Subject: A force switch with MCPAN install
Hello,
I am trying to install the DBD::mysql package, but I am having some issues
with
push through make testing
If this is too much to ask, just finding out the switch for force would do, I
can't seem to find any doco on this.
perl -MCPAN -e 'install DBD::mysql'
mike
Hi,
I am trying to install a module "Template::Extract"
through this command
C:> perl -MCPAN -e shell "install Template::Extract"
Since I can't find that(latest) modules in ActivePerl's PPM.
But somehow, I still fail to make install the module,
this are the error m
yes i know what it means.., what ftp site of cpan i
can use ?
Thanks.
--- Owen <[EMAIL PROTECTED]> wrote:
> On Thu, 26 Aug 2004 09:45:57 -0700 (PDT)
> Joe Echavarria <[EMAIL PROTECTED]> wrote:
>
> >When i try to configure the MCPAN i get this
> > error..:
On Thu, 26 Aug 2004 09:45:57 -0700 (PDT)
Joe Echavarria <[EMAIL PROTECTED]> wrote:
>When i try to configure the MCPAN i get this
> error..:
> Connecting to ftp.perl.org:21...
> ftp.perl.org: Host not found
> Issuing "/usr/bin/ftp -n"
> ftp.perl.org: unkno
Hello,
When i try to configure the MCPAN i get this
error..:
rying with "/usr/sfw/bin/ncftpget" to get
ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz
ftp.perl.org: unknown host.
ncftpget: cannot open ftp.perl.org: unknown host.
Trying with "/usr/sfw/bin/wget -O -&
> -Original Message-
> From: Jenda Krynicky [mailto:[EMAIL PROTECTED]
>
> If you look into C:\Perl\lib\Config.pm you'll find out that
> ActivePerl is set to expect "nmake", not "make" and it was compiled
> with MS Visual C, not with cygwin so modules compiled with cygwin may
> not be compat
From: "Traeder, Philipp" <[EMAIL PROTECTED]>
> Did you solve this problem? I've got exactly the same problem at the
> moment, and I tried more or less everything I could think of. I
> started with a clean installation of ActivePerl, then it told me it
> couldn't find make, so I installed cygwin wit
> -Original Message-
> From: Jenda Krynicky [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, March 16, 2004 8:57 PM
> To: [EMAIL PROTECTED]
> Subject: RE: ActiveState Win32 MCPAN install problem
>
>
> From: "Michael Weber" <[EMAIL PROTECTED]>
>
-- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
What does:
perl -MCPAN -e 'install "Bundle::CPAN"'
give you? Mine states:
CPAN: Storable loaded ok
Going to read /Root/.cpa
computers :)
I would STRONGLY recommend you do this first:
perl -MCPAN -e 'install "Date::Format File::Spec";
perl -MCPAN -e 'install "Date::Parse";
Thanks for guidance. I ran into this error message while installing the
TimeDate module:
---
f MySQL is not properly setup for Perl.
I would STRONGLY recommend you do this first:
perl -MCPAN -e 'install "Date::Format File::Spec";
perl -MCPAN -e 'install "Date::Parse";
Get this working:
perl -MCPAN -e 'install "Template";
Then work on MySQL an
hat I gathered from the install guide I should be able to run:
perl -MCPAN -e 'install "Bundle::Bugzilla"'
This is where my problems begin. When the script is done running it
output the following message:
Checking if your kit i
From: "Michael Weber" <[EMAIL PROTECTED]>
> > Good morning!
> >
> > I am running ActiveState Perl, latest and greatest, on a Win2000
> > box.
>
> > When I try to install modules from CPAN, I get the following error:
> >
> > G:\>pe
Same result. Any other ideas?
Thanx!
>>> "Rajesh Dorairajan" <[EMAIL PROTECTED]> 03/16/04
12:27PM >>>
Try perl -MCPAN -e "force install Mail::Sender"
Rajesh
> -Original Message-
> From: Michael Weber [mailto:[EMAIL PROTECTED]
&g
Try perl -MCPAN -e "force install Mail::Sender"
Rajesh
> -Original Message-
> From: Michael Weber [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, March 16, 2004 9:28 AM
> To: [EMAIL PROTECTED]
> Subject: ActiveState Win32 MCPAN install problem
>
>
&g
Good morning!
I am running ActiveState Perl, latest and greatest, on a Win2000 box.
When I try to install modules from CPAN, I get the following error:
G:\>perl -MCPAN -e "install Mail::Sender"
CPAN: Storable loaded ok
Going to read \.cpan\Metadata
Database was generated on Tue
ia [mailto:[EMAIL PROTECTED]
Envoyé : lundi, 22. décembre 2003 16:46
À : BERTHOLD Jean; [EMAIL PROTECTED]; BERTHOLD Jean
Objet : Re: How to reconfigure MCPAN ?
> Hello,
>
> I have a problem with Cpan module:
> At the first running of Perl installation, I received the following
promp
> Hello,
>
> I have a problem with Cpan module:
> At the first running of Perl installation, I received the following
prompt:
>
> "Are you ready for manual configuration? [yes] "
>
> Everything step of install except I put a wrong response at:
>
> Parameters for the 'perl Makefile.PL' command
Hello,
I have a problem with Cpan module:
At the first running of Perl installation, I received the following prompt:
"Are you ready for manual configuration? [yes] "
Everything step of install except I put a wrong response at:
Parameters for the 'perl Makefile.PL' command?
Typical frequently u
Joey Smith [[EMAIL PROTECTED]] quoth:
*>Actually, your question led me in the right direction...
*>
*>I just used CPAN to install Term::ReadLine:Gnu, and everything seems to
*>work just fine now! I guess Term::ReadLine doesn't use GNU readline by
*>default, or something...
That's odd as Term::Rea
Actually, your question led me in the right direction...
I just used CPAN to install Term::ReadLine:Gnu, and everything seems to
work just fine now! I guess Term::ReadLine doesn't use GNU readline by
default, or something...
Thanks, all, for the help!
On Fri, 7 Sep 2001, Brett W. McCoy wrote th
On Fri, 7 Sep 2001, Joey Smith wrote:
> Good question...how do I determine that?
>
> Perhaps the GNU readline on my system is out of sync with CPAN's
> upstream version...
Try aptgetting the deb for GNU readline and see if it needs updating.
-- Brett
ht
Good question...how do I determine that?
Perhaps the GNU readline on my system is out of sync with CPAN's
upstream version...
On Fri, 7 Sep 2001, Brett W. McCoy wrote the following to Joey Smith :
> On Fri, 7 Sep 2001, Joey Smith wrote:
>
> > I don't think so...this is on Debian GNU/Linux 2.2
On Fri, 7 Sep 2001, Joey Smith wrote:
> I don't think so...this is on Debian GNU/Linux 2.2 (also known as
> Potato). :)
Does Term::Readline depend on the GNU readline library?
-- Brett
http://www.chapelperilous.net/
-
I don't think so...this is on Debian GNU/Linux 2.2 (also known as
Potato). :)
On Fri, 7 Sep 2001, Elaine -HFB- Ashton wrote the following to Joey Smith :
> Joey Smith [[EMAIL PROTECTED]] quoth:
> *>Thanks for the input.
> *>
> *>"Strangely" means what I said in the latter sentence...no command
>
Joey Smith [[EMAIL PROTECTED]] quoth:
*>Thanks for the input.
*>
*>"Strangely" means what I said in the latter sentence...no command
*>completion at all, no history, and control-d does not work.
*>
*>I have reinstalled Bundle::CPAN several times, and even did a force on
*>Term::ReadKey and Term::R
Thanks for the input.
"Strangely" means what I said in the latter sentence...no command
completion at all, no history, and control-d does not work.
I have reinstalled Bundle::CPAN several times, and even did a force on
Term::ReadKey and Term::ReadLine, since they said they were up to date
after
Joey Smith [[EMAIL PROTECTED]] quoth:
*>Recently, many of my systems have begun acting very strangely when I try
*>to use CPAN's "shell" mode. I have no command completion, no history,
*>and when I try to exit with "Control-D", it just shows ^D...
Can you define 'strangely' a little more descript
Recently, many of my systems have begun acting very strangely when I try
to use CPAN's "shell" mode. I have no command completion, no history,
and when I try to exit with "Control-D", it just shows ^D...
As this is happening across many different systems, I'm assuming it is
something I have done
1 (or setenv FTP_PASSIVE 1 or whatever your shell
takes)
or
perl -MCPAN -e '$ENV{FTP_PASSIVE}=1; shell'
would also do the job.
- ask
> Terry Poperszky wrote:
> >
> > Question? How do I set MCPAN to use passive FTP connection?
> >
> > Terry
--
--
I changed line 1860 in 5.6.0/CPAN.pm to read:
my $ftp = Net::FTP->new($host, Passive=>1);
which works here, but I didn't spend much time looking to
see if anyone had done it properly.
-will
Terry Poperszky wrote:
>
> Question? How do I set MCPAN to use passive FTP conne
Question? How do I set MCPAN to use passive FTP connection?
Terry
Oliver Glass [[EMAIL PROTECTED]] quoth:
*>I have activestate perl installed on NT and used to use VPM for
*>installing packages. Recently, I discovered 'perl -MCPAN -e shell' when
*>using cygwin and found it works on NT also. I know ppm is something to
*>do with
perl -MCPAN -e shell puts you in the command prompt of the module downloader
for cpan
not sure about ppm but I did find this PPM faq
http://www.activestate.com/Products/ActivePerl/docs/faq/ActivePerl-faq2.html
I couldn't find anything on vpm.
Jamie
-Original Message-
From: O
I have activestate perl installed on NT and used to use VPM for
installing packages. Recently, I discovered 'perl -MCPAN -e shell' when
using cygwin and found it works on NT also. I know ppm is something to
do with packages too...
So what's the difference between these three
53 matches
Mail list logo
