On 25/05/18 02:00, bi...@pocketnc.com wrote:
> I would love to do this as well. the BBB appears to be able to boot from
> serial and network. I have not found anything yet.
Probably not via USB, because that requires the OS on eMMC to be up and
running to create the USB serial gadget, and overwrit
The LCD capes will use additional pins to support the touch interface and any
other I/O supported by the LCD cape, which is where the potential for conflict
arises. So far, I have not been able to locate a CAN cape and an LCD cape that
are able to be configured without such a conflict. I’m hopin
Hi:
Is there anybody has used BBVIEW? Recently i update my BB-B system
to debian 9.3. The kernal version is 4.9.78-ti-r94.After i update me
system, my 7.0 inch screen can't work anymore.
I am trying to find some information about how to deal with it,
someone says there is no ne
I'm beginner with BeagleBone and I need to develop on *cloud9* with my
*Beaglebone
Green*, on the first, these addresses 192.168.7.2 and
192.168.7.2:3000/ide.html work well, but suddenly nothing is shown in the
browser, still there is no access to these addresses but the cloud9 folder
exists.
I'm new to this area and I need to develop on *cloud9* with my *Beaglebone
Green*, on the first, these addresses 192.168.7.2 and
192.168.7.2:3000/ide.html work well, but suddenly nothing is shown in the
browser, still there is no access to these addresses but the cloud9 folder
exists. I do not
Thank you for your reply.
The problem I'm new to this area and I need to develop on cloud9, on the
first, the card start that addresses 192.168.7.2 and
192.168.7.2:3000/ide.html work well, but suddenly nothing is shown in the
browser, still there is no access to these addresses but the cloud9 fold
I am considering using the Beaglebone Black for a project that requires
support for a CAN interface and will also need an LCD display with touch
interface. Before purchasing a Beaglebone Black and appropriate capes, I am
trying to confirm that there will not be a conflict between the CAN and LCD
here are some pages i found that might be helpful.
once booted an image can be written to the eMMC. I have not tried this yet.
some help on serial booting.
https://e2e.ti.com/support/arm/sitara_arm/f/791/t/169883?AM335x-Beaglebone-boot-over-UART
Ethernet boot
http://processors.wiki.ti.com/index.p
I would love to do this as well. the BBB appears to be able to boot from
serial and network. I have not found anything yet.
On Wednesday, May 23, 2018 at 6:32:07 PM UTC-6, Harry wrote:
>
>
> Hello all,
>
> I am wondering if there is a method to flash the eMMC on the BBB by using
> serial comman
I have recently bought a BeagleBone Black, I have flashed an 8 GB class 10
micro SD card with the latest image file and inserted it into the Board.
When I connect the board to a PC it boots up and connects via Putty, when I
press and hold S2, then press and release S3 and then release S2 the boa
Hello,
I have recently bought a BeagleBone Black Rev C but it fails to boot from
the micro SD card, I have uploaded the latest image to a micro SD card
which I have then placed in my BeagleBone Black and connected it to the PC
via connector P4. The device can initially be contacted using Putty
Hello,
My Beaglebone Black has problems booting with an sd card made following the
guide:
https://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-RemovemicroSD/SDcard
am33x-rt-v4.14 (Longterm 4.14.x + Real-Time Linux)
debian-9.3-minimal-armhf-2017-12-09
When compiling the kerne
Hello everyone:
i want to know the difference between the version of debian
marded IoT, LXDE,LXQT
Thank you.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe fro
13 matches
Mail list logo
