> "Arnhold" == Arnhold writes:
Arnhold> Because the the link
Arnhold> /dev/tape/by-id/scsi-3500e09e0001af92f-nst is static. When
Arnhold> you change something in yout SCSI configuration the
Arnhold> devicefile /dev/nstX could be changed and you have to change
Arnhold> your config. The symli
>
> This should be Device = sdlt1600 to match the Device Name in the
> bacula-sd.conf.
>
This was the solution.
Device here means devicename in storage daemon and not devicefile.
Many thanks Martin.
+--
|This was sent by r
> On Mon, 01 Nov 2010 09:04:13 +0100, Rene Arnhold said:
>
> When I label a tape with the bconsole i get the following error.:
> 3999 Device "/dev/tape/by-id/scsi-3500e09e0001af92f-nst" not found or
> could not be opened
> ...
> bacula-dir.conf:
> ##
Thanks for response.
Because the the link /dev/tape/by-id/scsi-3500e09e0001af92f-nst is static.
When you change something in yout SCSI configuration the devicefile /dev/nstX
could be changed and you have to change your config. The symlinks /dev/tape/by*
(or /dev/disk/by-* for hard drives) are ge
Why don't you use the classic "/dev/nst0" device format in the Device section?
J.
2010/11/1 Rene Arnhold :
> Hi
> At the Moment i try to configure a Bacula Backup Server.
> When I label a tape with the bconsole i get the following error.:
> 3999 Device "/dev/tape/by-id/scsi-3500e09e0001af92f-
Hi
At the Moment i try to configure a Bacula Backup Server.
When I label a tape with the bconsole i get the following error.:
3999 Device "/dev/tape/by-id/scsi-3500e09e0001af92f-nst" not found or
could not be opened
I have searched but not found a solution for my problem.
I have done a btape fill c
