Am 11.01.2019 um 23:13 schrieb Jeffrey R. Lang:
> In your mtx command output one thing I don't see is the Data Transfer Unit
> (i.e. tape drive) associated with the tape library.
> [...]
Have a second look, there is a "Data Transfer Element" line in Richard's
output. It seems as if your mail clie
ed
properly.
The output of "lsscsi -g" does who the tape drive?
-Original Message-
From: Richard Couture
Sent: Friday, January 11, 2019 1:59 PM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] mtx and mtx-changer not functioning
How odd
[root@LTOMag ~]#
rge.net
Subject: Re: [Bacula-users] mtx and mtx-changer not functioning
How odd
[root@LTOMag ~]# mt -f /dev/st0 offline
[root@LTOMag ~]# mtx -f /dev/sg3 unload 1 0 Data Transfer Element 0 is Empty
Now says the tape drive is empty
HOWEVER
[root@LTOMag ~]# mtx -f /dev/sg3 status
Storage Cha
> > offline=0
> >
> > In the example from below
> >
> > mtx -f /dev/sg3 load 1 0
> > mtx -f /dev/sg3 unload 1 0
> >
> > add a command to unload the tape from the drive between the two lines
> >
> > mt -f offline
> >
> >
-
From: Sebastian Suchanek
Sent: Friday, January 11, 2019 12:53 PM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] mtx and mtx-changer not functioning
◆ This message was sent from a non-UWYO address. Please exercise caution when
clicking links or opening attachments from
@lists.sourceforge.net
Subject: Re: [Bacula-users] mtx and mtx-changer not functioning
◆ This message was sent from a non-UWYO address. Please exercise caution when
clicking links or opening attachments from external sources.
Am 11.01.2019 um 14:49 schrieb Richard Couture:
>> Does mtx work wh
Am 11.01.2019 um 14:49 schrieb Richard Couture:
>> Does mtx work when you explicitly specify the slots? I.e.:
>>
>> mtx -f /dev/sg3 load 1 0
>> mtx -f /dev/sg3 unload 1 0
>
> No
Then, in my opinion, the problem is somewhere outside of Bacula.
My best guess is that either your library and your ver
No
Richard
On 1/10/19 11:08 PM, Sebastian Suchanek wrote:
Am 11.01.2019 um 02:05 schrieb Richard Couture:
[...]
[root@LTOMag scripts]# mtx -f /dev/sg3 unload
Unloading drive 0 into Storage Element 1...mtx: Request Sense: Long
Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sens
Am 11.01.2019 um 02:05 schrieb Richard Couture:
> [...]
> [root@LTOMag scripts]# mtx -f /dev/sg3 unload
> Unloading drive 0 into Storage Element 1...mtx: Request Sense: Long
> Report=yes
> mtx: Request Sense: Valid Residual=no
> mtx: Request Sense: Error Code=70 (Current)
> mtx: Request Sense: Se
Greetings
I have a Quantum scalar I3 with LTO-8
[root@LTOMag scripts]# lsscsi
[0:0:0:0]diskATA WDC WD10EZEX-75W 1A02 /dev/sda
[1:0:0:0]diskATA WD5003ABYX-23WC38 /dev/sdb
[6:0:0:0]tapeIBM ULTRIUM-HH8 J4D1 /dev/st0
[6:0:0:1]mediumx QUANTUM Sc
10 matches
Mail list logo
