> [root@d0lphb040 bacula]# sudo -u bacula tapeinfo -f /dev/nst0
> mtx: Request Sense: Long Report=yes
> mtx: Request Sense: Valid Residual=no
> mtx: Request Sense: Error Code=0 (Unknown?!)
> mtx: Request Sense: Sense Key=No Sense
> mtx: Request Sense: FileMark=no
> mtx: Request Sense: EOM=no
> mtx:
[root@d0lphb040 ~]# sudo -u bacula mtx -f /dev/sg8 status
Storage Changer /dev/sg8:1 Drives, 8 Slots ( 0 Import/Export )
Data Transfer Element 0:Full (Storage Element 7 Loaded):VolumeTag =
SK1028L1
Storage Element 1:Full :VolumeTag=SK1001L3
Storage Element 2:Full :VolumeTag=SK1011L3
well, upon further investigation, it looks like bacula-sd runs as root
anyway.
[root@d0lphb040 ~]# ps maux|grep bacula-sd
root 10838 0.0 0.0 242220 1992 ?-10:04 0:00 bacula-sd
-c /etc/bacula/bacula-sd.conf
thanks,
jonathan
On 2/8/13 9:55 AM, "Alan Brown" wrote:
>On
he (bacula) should be able to.
[root@d0lphb040 bacula]# ls -la /dev/sg8
crw-rw 1 root tape 21, 8 Feb 7 13:00 /dev/sg8
[root@d0lphb040 bacula]# ls -la /dev/nst0
crw-rw 1 root tape 9, 128 Feb 7 13:00 /dev/nst0
[root@d0lphb040 bacula]# cat /etc/group|grep bacula
disk:x:6:bacula
tape:x:33:ba
> well, ill retry them all again, but the drive works enough to label all
> the barcodes in the drive.
>
> Pool: TapeArchiveFullBackups
> +-++---+-+--+--+---
> ---+-+--+
> | mediaid | volumename | volstatus | enabled | volbytes
well, ill retry them all again, but the drive works enough to label all
the barcodes in the drive.
Pool: TapeArchiveFullBackups
+-++---+-+--+--+---
---+-+--+
| mediaid | volumename | volstatus | enabled | volbytes | volfiles |
On 2013-02-08 09:12, Jonathan Horne wrote:
> this is boggling. my first attempt at getting a tape library
> working, i
> followed all the steps on dan langille's website until the PV4000
> woke up
> an wrote data. after following all those same tests and even to the
> point
> that all tests p
do you mean the MTX scripts? they are root:root 755, and as far as i know
bacula should be able to access them (on another systems they are
identical owner:permissions, and this system works fine with its tape
drive).
in debug mode, i get this:
bacula-sd: askdir.c:182-76 wrote:
>
>Zitat von Jo
Zitat von Jonathan Horne :
> as title says, i have a PV-124T that works with btape like a champ,
> but not within bacula for running jobs. when i submit a job to run
> to tape, the jobs just sit there.
>
> i have identical job configuration on another server with a larger
> power vault tap
as title says, i have a PV-124T that works with btape like a champ, but not
within bacula for running jobs. when i submit a job to run to tape, the jobs
just sit there.
i have identical job configuration on another server with a larger power vault
tape drive, and its runing like a top. when yo
10 matches
Mail list logo
